ipilcher / n5550

Thecus N5550 hardware support
GNU General Public License v2.0
8 stars 8 forks source link

Activitiy LEDs won't work #1

Closed mheubach closed 10 years ago

mheubach commented 10 years ago

Hi,

I built the modules for Debian 3.2 an 3.14 kernels. I am not able to get the activity leds in the drive cage to work. Status leds (usb, busy, fail) and the disk status leds work fine, as is the display.

As soon as I load the n5550_board module the last 4 activity leds on the drive cage turn on (green - from top to bottom). The first led (top) stays off. And there is no activity on the leds.

I have absolutely no idea where to start to diagnose this.

Any idea?

Manfred Heubach

ipilcher commented 10 years ago

My first guess is an ACPI conflict. Check dmesg for messages like:

ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251) ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \SWC1 2 (20130328/utaddress-251) ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GBAS 1 (20130328/utaddress-251) ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GBAS 1 (20130328/utaddress-251)

If this is the problem, you'll need to add acpi_enforce_resources=lax to your kernel command line.

Let me know if this works.

BTW, welcome to the (very small) club of people using this software. :-)

mheubach commented 10 years ago

Hi Ian,

it works! Thank you very much! We will do some more tests with Debian and Ubuntu now. The default kernel of Debian Wheezy seems to lack the led functions (oneshot).

And it’s a nice club – even if it’s small like this :-)

Manfred

Von: Ian Pilcher [mailto:notifications@github.com] Gesendet: Donnerstag, 24. Juli 2014 17:25 An: ipilcher/n5550 Cc: Manfred Heubach Betreff: Re: [n5550] Activitiy LEDs won't work (#1)

My first guess is an ACPI conflict. Check dmesg for messages like:

ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251) ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \SWC1 2 (20130328/utaddress-251) ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GBAS 1 (20130328/utaddress-251) ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GBAS 1 (20130328/utaddress-251)

If this is the problem, you'll need to add acpi_enforce_resources=lax to your kernel command line.

Let me know if this works.

BTW, welcome to the (very small) club of people using this software. :-)

— Reply to this email directly or view it on GitHubhttps://github.com/ipilcher/n5550/issues/1#issuecomment-50033340.

mheubach commented 8 years ago

Hi Ian,

fascinating - is it two years already?

I today tried to build the modules on kernel 4.4.0. The build process throws no errors and the modules can be loaded without any errors. Anyway ahci_leds doesn't work. I have the same affect as two years ago. I tried acpi_enforce_resources=lax and =no.

The activity led on first disk is off and the activity leds on disk two to five are on. There is no "flashing" on disk activity.

Do you have any ideas how this could be solved?

dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-38-generic (buildd@lgw01-58) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #57-Ubuntu SMP Tue Sep 6 15:42:33 UTC 2016 (Ubuntu 4.4.0-38.57-generic 4.4.19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=db91dd98-378c-4c52-bd91-3b10a08e560b ro acpi_enforce_resources=no
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077bacfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077bad000-0x0000000077daefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077daf000-0x000000007d5e6fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d5e7000-0x000000007f5cefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f5cf000-0x000000007f6cefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6cf000-0x000000007f6eefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f6ef000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe20000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Intel Corporation Milstead Platform/Granite Well, BIOS CDV_T30 X64 09/17/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   4 base 07F6F0000 mask FFFFF0000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33bba000-0x35dd4fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 PTL   )
[    0.000000] ACPI: XSDT 0x000000007F6EE120 00007C (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: FACP 0x000000007F6E5000 0000F4 (v03 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 0x000000007F6E7000 00483B (v02 PTL    OEMTABLE 00000001 INTL 20061109)
[    0.000000] ACPI: FACS 0x000000007F665000 000040
[    0.000000] ACPI: FACS 0x000000007F665000 000040
[    0.000000] ACPI: SLIC 0x000000007F6ED000 000176 (v01 PTL    OEMTABLE 00000002 PTL  00000001)
[    0.000000] ACPI: SSDT 0x000000007F6EC000 00043E (v01 PTL    PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: HPET 0x000000007F6E4000 000038 (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 0x000000007F6E3000 000078 (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 0x000000007F6E2000 00003C (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x000000007F6E1000 000655 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x000000007F6E0000 00003E (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x000000007F6DF000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: POAT 0x000000007F6DE000 000055 (v03 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x000000007F6DD000 00013E (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f6effff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7d5e1000-0x7d5e5fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000077bacfff]
[    0.000000]   node   0: [mem 0x0000000077daf000-0x000000007d5e6fff]
[    0.000000]   node   0: [mem 0x000000007f6ef000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 512899
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 508902 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x77bad000-0x77daefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d5e7000-0x7f5cefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f5cf000-0x7f6cefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f6cf000-0x7f6eefff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007d000000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 504722
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=db91dd98-378c-4c52-bd91-3b10a08e560b ro acpi_enforce_resources=no
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1964552K/2051596K available (8404K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 87044K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1861.897 MHz processor
[    0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.79 BogoMIPS (lpj=7447588)
[    0.000083] pid_max: default: 32768 minimum: 301
[    0.000105] ACPI: Core revision 20150930
[    0.011817] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.011897] Security Framework initialized
[    0.011913] Yama: becoming mindful.
[    0.011983] AppArmor: AppArmor initialized
[    0.012412] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.014101] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.014917] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.014948] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.015514] Initializing cgroup subsys io
[    0.015542] Initializing cgroup subsys memory
[    0.015573] Initializing cgroup subsys devices
[    0.015592] Initializing cgroup subsys freezer
[    0.015609] Initializing cgroup subsys net_cls
[    0.015626] Initializing cgroup subsys perf_event
[    0.015643] Initializing cgroup subsys net_prio
[    0.015665] Initializing cgroup subsys hugetlb
[    0.015681] Initializing cgroup subsys pids
[    0.015739] CPU: Physical Processor ID: 0
[    0.015753] CPU: Processor Core ID: 0
[    0.015767] mce: CPU supports 5 MCE banks
[    0.015789] CPU0: Thermal monitoring enabled (TM1)
[    0.015806] process: using mwait in idle threads
[    0.015824] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.015838] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.016370] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[    0.019456] ftrace: allocating 32006 entries in 126 pages
[    0.044182] smpboot: Max logical packages: 2
[    0.044202] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.044791] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.191970] smpboot: CPU0: Intel(R) Atom(TM) CPU D2550   @ 1.86GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.192030] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.192071] ... version:                3
[    0.192083] ... bit width:              40
[    0.192094] ... generic registers:      2
[    0.192105] ... value mask:             000000ffffffffff
[    0.192117] ... max period:             000000007fffffff
[    0.192129] ... fixed-purpose events:   3
[    0.192140] ... event mask:             0000000700000003
[    0.194021] x86: Booting SMP configuration:
[    0.194041] .... node  #0, CPUs:      #1
[    0.194184] CPU1: Thermal monitoring handled by SMI
[    0.196431] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.196771]  #2
[    0.196868] CPU2: Thermal monitoring handled by SMI
[    0.199203]  #3
[    0.199307] CPU3: Thermal monitoring handled by SMI
[    0.201401] x86: Booted up 1 node, 4 CPUs
[    0.201419] smpboot: Total of 4 processors activated (14895.17 BogoMIPS)
[    0.202563] devtmpfs: initialized
[    0.209359] evm: security.selinux
[    0.209375] evm: security.SMACK64
[    0.209386] evm: security.SMACK64EXEC
[    0.209397] evm: security.SMACK64TRANSMUTE
[    0.209409] evm: security.SMACK64MMAP
[    0.209420] evm: security.ima
[    0.209430] evm: security.capability
[    0.209638] PM: Registering ACPI NVS region [mem 0x7f5cf000-0x7f6cefff] (1048576 bytes)
[    0.209911] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.210157] pinctrl core: initialized pinctrl subsystem
[    0.210448] RTC time: 14:55:13, date: 09/30/16
[    0.210763] NET: Registered protocol family 16
[    0.219986] cpuidle: using governor ladder
[    0.231982] cpuidle: using governor menu
[    0.232002] PCCT header not found.
[    0.232177] ACPI: bus type PCI registered
[    0.232193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.232407] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.232433] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.232478] PCI: Using configuration type 1 for base access
[    0.249080] ACPI: Added _OSI(Module Device)
[    0.249100] ACPI: Added _OSI(Processor Device)
[    0.249113] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.249125] ACPI: Added _OSI(Processor Aggregator Device)
[    0.253854] ACPI: Executed 1 blocks of module-level executable AML code
[    0.257492] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.260181] ACPI: Interpreter enabled
[    0.260217] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.260280] ACPI: (supports S0 S1 S3 S4 S5)
[    0.260294] ACPI: Using IOAPIC for interrupt routing
[    0.260383] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.273984] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.274015] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.274138] \_SB_.PCI0:_OSC invalid UUID
[    0.274142] _OSC request data:1 1f 0 
[    0.274152] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.274978] PCI host bridge to bus 0000:00
[    0.274997] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.275013] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.275029] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.275051] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.275073] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.275095] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.275117] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.275139] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.275161] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.275183] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.275210] pci 0000:00:00.0: [8086:0bf3] type 00 class 0x060000
[    0.275476] pci 0000:00:02.0: [8086:0be2] type 00 class 0x030000
[    0.275500] pci 0000:00:02.0: reg 0x10: [mem 0x80400000-0x804fffff]
[    0.275510] pci 0000:00:02.0: reg 0x14: [io  0x50d0-0x50d7]
[    0.275804] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.275892] pci 0000:00:1a.0: reg 0x20: [io  0x50a0-0x50bf]
[    0.276131] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.276280] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.276337] pci 0000:00:1a.7: reg 0x10: [mem 0x80504c00-0x80504fff]
[    0.276482] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.276612] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.276739] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[    0.276794] pci 0000:00:1b.0: reg 0x10: [mem 0x80500000-0x80503fff 64bit]
[    0.276920] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.277153] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.277300] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.277434] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.277563] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
[    0.277712] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.277846] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.277964] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
[    0.278100] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.278235] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.278355] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
[    0.278492] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.278627] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.278750] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[    0.278894] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.279032] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.279153] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[    0.279299] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.279522] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.279618] pci 0000:00:1d.0: reg 0x20: [io  0x5080-0x509f]
[    0.279838] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.279964] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.280083] pci 0000:00:1d.1: reg 0x20: [io  0x5060-0x507f]
[    0.280317] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.280440] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.280544] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.280771] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.280908] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.280965] pci 0000:00:1d.7: reg 0x10: [mem 0x80504800-0x80504bff]
[    0.281107] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.281235] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.281358] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.281572] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.281691] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[    0.281844] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0400-0x047f]: address conflict with ACPI CPU throttle [io  0x0410-0x0415]
[    0.281874] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.281892] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0007)
[    0.282150] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[    0.282201] pci 0000:00:1f.2: reg 0x10: [io  0x50c8-0x50cf]
[    0.282219] pci 0000:00:1f.2: reg 0x14: [io  0x50dc-0x50df]
[    0.282238] pci 0000:00:1f.2: reg 0x18: [io  0x50c0-0x50c7]
[    0.282257] pci 0000:00:1f.2: reg 0x1c: [io  0x50d8-0x50db]
[    0.282275] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    0.282294] pci 0000:00:1f.2: reg 0x24: [mem 0x80504000-0x805047ff]
[    0.282365] pci 0000:00:1f.2: PME# supported from D3hot
[    0.282591] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    0.282630] pci 0000:00:1f.3: reg 0x10: [mem 0x80505000-0x805050ff 64bit]
[    0.282673] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.283077] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000
[    0.283166] pci 0000:01:00.0: reg 0x10: [mem 0x80300000-0x8031ffff]
[    0.283214] pci 0000:01:00.0: reg 0x18: [io  0x4000-0x401f]
[    0.283241] pci 0000:01:00.0: reg 0x1c: [mem 0x80320000-0x80323fff]
[    0.283418] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.283503] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.288014] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.288035] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.288044] pci 0000:00:1c.0:   bridge window [mem 0x80300000-0x803fffff]
[    0.288224] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
[    0.288314] pci 0000:02:00.0: reg 0x10: [mem 0x80200000-0x8021ffff]
[    0.288363] pci 0000:02:00.0: reg 0x18: [io  0x3000-0x301f]
[    0.288389] pci 0000:02:00.0: reg 0x1c: [mem 0x80220000-0x80223fff]
[    0.288568] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.288654] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.296007] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.296028] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.296036] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x802fffff]
[    0.296179] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.296334] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.296536] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[    0.296635] pci 0000:05:00.0: reg 0x10: [mem 0x80100000-0x80101fff 64bit]
[    0.296861] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.296957] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.304011] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.304035] pci 0000:00:1c.4:   bridge window [mem 0x80100000-0x801fffff]
[    0.304179] pci 0000:06:00.0: [1095:3132] type 00 class 0x018000
[    0.304260] pci 0000:06:00.0: reg 0x10: [mem 0x80004000-0x8000407f 64bit]
[    0.304299] pci 0000:06:00.0: reg 0x18: [mem 0x80000000-0x80003fff 64bit]
[    0.304322] pci 0000:06:00.0: reg 0x20: [io  0x2000-0x207f]
[    0.304366] pci 0000:06:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.304454] pci 0000:06:00.0: supports D1 D2
[    0.304570] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.304611] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.304628] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.304637] pci 0000:00:1c.5:   bridge window [mem 0x80000000-0x800fffff]
[    0.304794] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.304825] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.304831] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.304837] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.304843] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.304849] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.304854] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.304860] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.304866] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.304872] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.306230] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.306418] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.306599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.306780] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.306961] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.307151] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.307341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.307523] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.307955] ACPI: Enabled 11 GPEs in block 00 to 3F
[    0.308356] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.308374] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.308403] vgaarb: loaded
[    0.308415] vgaarb: bridge control possible 0000:00:02.0
[    0.309108] SCSI subsystem initialized
[    0.309266] libata version 3.00 loaded.
[    0.309335] ACPI: bus type USB registered
[    0.309412] usbcore: registered new interface driver usbfs
[    0.309450] usbcore: registered new interface driver hub
[    0.309520] usbcore: registered new device driver usb
[    0.309970] PCI: Using ACPI for IRQ routing
[    0.322372] PCI: pci_cache_line_size set to 64 bytes
[    0.322504] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.322509] e820: reserve RAM buffer [mem 0x77bad000-0x77ffffff]
[    0.322513] e820: reserve RAM buffer [mem 0x7d5e7000-0x7fffffff]
[    0.322517] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.322821] NetLabel: Initializing
[    0.322836] NetLabel:  domain hash size = 128
[    0.322848] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.322884] NetLabel:  unlabeled traffic allowed by default
[    0.323108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.323130] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.325186] amd_nb: Cannot enumerate AMD northbridges
[    0.325237] clocksource: Switched to clocksource hpet
[    0.345122] AppArmor: AppArmor Filesystem Enabled
[    0.345351] pnp: PnP ACPI init
[    0.345693] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.345714] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.345729] system 00:00: [io  0x1010-0x1013] has been reserved
[    0.345749] system 00:00: [io  0xffff] has been reserved
[    0.345765] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.345781] system 00:00: [io  0x0500-0x057f] could not be reserved
[    0.345802] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.345959] system 00:01: [io  0x06a0-0x06af] has been reserved
[    0.345977] system 00:01: [io  0x06b0-0x06ff] has been reserved
[    0.345996] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.346082] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.346665] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.347172] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.347473] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.347494] system 00:05: [mem 0x00000000-0x00003fff] could not be reserved
[    0.347510] system 00:05: [mem 0x00000000-0x00000fff] could not be reserved
[    0.347526] system 00:05: [mem 0x00000000-0x00000fff] could not be reserved
[    0.347542] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.347561] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.347924] pnp: PnP ACPI: found 6 devices
[    0.358490] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.358535] pci 0000:06:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.358590] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.358616] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.358635] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.358642] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.358649] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.358666] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.358673] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.358680] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.358698] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    0.358705] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[    0.358723] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[    0.358755] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.358775] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358782] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358789] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358795] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358801] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.358808] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.358814] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358821] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358827] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.358833] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.358840] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358846] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358853] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358859] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358866] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358872] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.358878] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.358884] pci 0000:00:1c.2: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.358890] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.358896] pci 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.358902] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.358908] pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.358929] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.358961] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.358986] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80a00000-0x80bfffff]
[    0.359010] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80c00000-0x80dfffff 64bit pref]
[    0.359036] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80e00000-0x80ffffff]
[    0.359060] pci 0000:00:1c.3: BAR 15: assigned [mem 0x81000000-0x811fffff 64bit pref]
[    0.359091] pci 0000:00:1c.4: BAR 15: assigned [mem 0x81200000-0x813fffff 64bit pref]
[    0.359122] pci 0000:00:1c.5: BAR 15: assigned [mem 0x81400000-0x815fffff 64bit pref]
[    0.359148] pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
[    0.359164] pci 0000:00:1c.3: BAR 13: assigned [io  0x7000-0x7fff]
[    0.359181] pci 0000:00:1c.4: BAR 13: assigned [io  0x8000-0x8fff]
[    0.359201] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.359217] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.359238] pci 0000:00:1c.0:   bridge window [mem 0x80300000-0x803fffff]
[    0.359258] pci 0000:00:1c.0:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.359287] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.359303] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.359323] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x802fffff]
[    0.359342] pci 0000:00:1c.1:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.359371] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.359387] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
[    0.359407] pci 0000:00:1c.2:   bridge window [mem 0x80a00000-0x80bfffff]
[    0.359426] pci 0000:00:1c.2:   bridge window [mem 0x80c00000-0x80dfffff 64bit pref]
[    0.359455] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.359470] pci 0000:00:1c.3:   bridge window [io  0x7000-0x7fff]
[    0.359490] pci 0000:00:1c.3:   bridge window [mem 0x80e00000-0x80ffffff]
[    0.359508] pci 0000:00:1c.3:   bridge window [mem 0x81000000-0x811fffff 64bit pref]
[    0.359537] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.359552] pci 0000:00:1c.4:   bridge window [io  0x8000-0x8fff]
[    0.359573] pci 0000:00:1c.4:   bridge window [mem 0x80100000-0x801fffff]
[    0.359592] pci 0000:00:1c.4:   bridge window [mem 0x81200000-0x813fffff 64bit pref]
[    0.359624] pci 0000:06:00.0: BAR 6: assigned [mem 0x80080000-0x800fffff pref]
[    0.359647] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.359663] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.359683] pci 0000:00:1c.5:   bridge window [mem 0x80000000-0x800fffff]
[    0.359702] pci 0000:00:1c.5:   bridge window [mem 0x81400000-0x815fffff 64bit pref]
[    0.359732] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.359763] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.359769] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.359774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.359780] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.359785] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.359791] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.359796] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.359802] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.359807] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window]
[    0.359813] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.359818] pci_bus 0000:01: resource 1 [mem 0x80300000-0x803fffff]
[    0.359824] pci_bus 0000:01: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.359829] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.359834] pci_bus 0000:02: resource 1 [mem 0x80200000-0x802fffff]
[    0.359840] pci_bus 0000:02: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.359845] pci_bus 0000:03: resource 0 [io  0x6000-0x6fff]
[    0.359851] pci_bus 0000:03: resource 1 [mem 0x80a00000-0x80bfffff]
[    0.359856] pci_bus 0000:03: resource 2 [mem 0x80c00000-0x80dfffff 64bit pref]
[    0.359862] pci_bus 0000:04: resource 0 [io  0x7000-0x7fff]
[    0.359867] pci_bus 0000:04: resource 1 [mem 0x80e00000-0x80ffffff]
[    0.359872] pci_bus 0000:04: resource 2 [mem 0x81000000-0x811fffff 64bit pref]
[    0.359878] pci_bus 0000:05: resource 0 [io  0x8000-0x8fff]
[    0.359883] pci_bus 0000:05: resource 1 [mem 0x80100000-0x801fffff]
[    0.359889] pci_bus 0000:05: resource 2 [mem 0x81200000-0x813fffff 64bit pref]
[    0.359894] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.359899] pci_bus 0000:06: resource 1 [mem 0x80000000-0x800fffff]
[    0.359905] pci_bus 0000:06: resource 2 [mem 0x81400000-0x815fffff 64bit pref]
[    0.359911] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.359916] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.359922] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.359927] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.359933] pci_bus 0000:07: resource 8 [mem 0x000e0000-0x000effff window]
[    0.359938] pci_bus 0000:07: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.359944] pci_bus 0000:07: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.359949] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.359955] pci_bus 0000:07: resource 12 [mem 0xfed40000-0xfed44fff window]
[    0.360038] NET: Registered protocol family 2
[    0.360481] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.360629] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.360769] TCP: Hash tables configured (established 16384 bind 16384)
[    0.360890] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.360938] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.361140] NET: Registered protocol family 1
[    0.361196] pci 0000:00:02.0: Video device with shadowed ROM
[    0.363110] PCI: CLS 64 bytes, default 64
[    0.363255] Trying to unpack rootfs image as initramfs...
[    1.674380] Freeing initrd memory: 34924K (ffff880033bba000 - ffff880035dd5000)
[    1.674795] Scanning for low memory corruption every 60 seconds
[    1.675754] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.675839] audit: initializing netlink subsys (disabled)
[    1.675900] audit: type=2000 audit(1475247313.560:1): initialized
[    1.676733] Initialise system trusted keyring
[    1.677095] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.682017] zbud: loaded
[    1.682570] VFS: Disk quotas dquot_6.6.0
[    1.682687] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.683520] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.684315] fuse init (API version 7.23)
[    1.684772] Key type big_key registered
[    1.684830] Allocating IMA MOK and blacklist keyrings.
[    1.685942] Key type asymmetric registered
[    1.685963] Asymmetric key parser 'x509' registered
[    1.686110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.686241] io scheduler noop registered
[    1.686263] io scheduler deadline registered (default)
[    1.686394] io scheduler cfq registered
[    1.687317] pcieport 0000:00:1c.2: enabling device (0000 -> 0003)
[    1.687627] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
[    1.688407] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.688440] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.688538] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    1.688552] vesafb: scrolling: redraw
[    1.688566] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.688595] pmd_set_huge: Cannot satisfy [mem 0x7f800000-0x7fa00000] with a huge-page mapping due to MTRR override.
[    1.688646] vesafb: framebuffer at 0x7f800000, mapped to 0xffffc90000800000, using 5120k, total 5120k
[    1.702460] Console: switching to colour frame buffer device 160x64
[    1.715591] fb0: VESA VGA frame buffer device
[    1.715719] intel_idle: MWAIT substates: 0x10
[    1.715724] intel_idle: v0.4.1 model 0x36
[    1.715727] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.716074] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.716216] ACPI: Power Button [PWRB]
[    1.716389] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.716526] ACPI: Sleep Button [SLPB]
[    1.716695] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.716817] ACPI: Power Button [PWRF]
[    1.717649] GHES: HEST is not enabled!
[    1.718008] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.738927] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.759945] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.764816] Linux agpgart interface v0.103
[    1.774219] brd: module loaded
[    1.778441] loop: module loaded
[    1.779147] libphy: Fixed MDIO Bus: probed
[    1.779227] tun: Universal TUN/TAP device driver, 1.6
[    1.779309] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.779567] PPP generic driver version 2.4.2
[    1.779828] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.779947] ehci-pci: EHCI PCI platform driver
[    1.780261] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.780366] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.780507] ehci-pci 0000:00:1a.7: debug port 1
[    1.784512] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.784553] ehci-pci 0000:00:1a.7: irq 18, io mem 0x80504c00
[    1.793358] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.793591] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.793704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.793820] usb usb1: Product: EHCI Host Controller
[    1.793901] usb usb1: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[    1.794002] usb usb1: SerialNumber: 0000:00:1a.7
[    1.794425] hub 1-0:1.0: USB hub found
[    1.794515] hub 1-0:1.0: 2 ports detected
[    1.795113] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.795227] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.795384] ehci-pci 0000:00:1d.7: debug port 1
[    1.799375] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.799409] ehci-pci 0000:00:1d.7: irq 23, io mem 0x80504800
[    1.809346] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.809583] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.809696] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.814072] usb usb2: Product: EHCI Host Controller
[    1.818409] usb usb2: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[    1.822745] usb usb2: SerialNumber: 0000:00:1d.7
[    1.827391] hub 2-0:1.0: USB hub found
[    1.831731] hub 2-0:1.0: 6 ports detected
[    1.836475] ehci-platform: EHCI generic platform driver
[    1.840830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.845176] ohci-pci: OHCI PCI platform driver
[    1.849513] ohci-platform: OHCI generic platform driver
[    1.853805] uhci_hcd: USB Universal Host Controller Interface driver
[    1.858315] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.862643] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.867013] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.871372] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050a0
[    1.875880] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.880281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.884657] usb usb3: Product: UHCI Host Controller
[    1.888998] usb usb3: Manufacturer: Linux 4.4.0-38-generic uhci_hcd
[    1.893360] usb usb3: SerialNumber: 0000:00:1a.0
[    1.898080] hub 3-0:1.0: USB hub found
[    1.902410] hub 3-0:1.0: 2 ports detected
[    1.907096] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.911341] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.915562] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.919741] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
[    1.924002] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.928129] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.932201] usb usb4: Product: UHCI Host Controller
[    1.936215] usb usb4: Manufacturer: Linux 4.4.0-38-generic uhci_hcd
[    1.940236] usb usb4: SerialNumber: 0000:00:1d.0
[    1.944514] hub 4-0:1.0: USB hub found
[    1.948428] hub 4-0:1.0: 2 ports detected
[    1.952758] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.956675] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    1.960572] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.964519] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[    1.968528] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.972453] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.976732] usb usb5: Product: UHCI Host Controller
[    1.981006] usb usb5: Manufacturer: Linux 4.4.0-38-generic uhci_hcd
[    1.985307] usb usb5: SerialNumber: 0000:00:1d.1
[    1.989917] hub 5-0:1.0: USB hub found
[    1.993858] hub 5-0:1.0: 2 ports detected
[    1.998198] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.002161] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    2.006422] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.010593] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    2.014600] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.018541] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.022495] usb usb6: Product: UHCI Host Controller
[    2.026405] usb usb6: Manufacturer: Linux 4.4.0-38-generic uhci_hcd
[    2.030338] usb usb6: SerialNumber: 0000:00:1d.2
[    2.034656] hub 6-0:1.0: USB hub found
[    2.038570] hub 6-0:1.0: 2 ports detected
[    2.042930] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.046847] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 7
[    2.056209] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    2.060612] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    2.064636] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.068644] usb usb7: Product: xHCI Host Controller
[    2.072649] usb usb7: Manufacturer: Linux 4.4.0-38-generic xhci-hcd
[    2.076694] usb usb7: SerialNumber: 0000:05:00.0
[    2.081072] hub 7-0:1.0: USB hub found
[    2.085098] hub 7-0:1.0: 2 ports detected
[    2.089359] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.093368] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8
[    2.097442] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.101570] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[    2.105661] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.109753] usb usb8: Product: xHCI Host Controller
[    2.113817] usb usb8: Manufacturer: Linux 4.4.0-38-generic xhci-hcd
[    2.117897] usb usb8: SerialNumber: 0000:05:00.0
[    2.122336] hub 8-0:1.0: USB hub found
[    2.126407] hub 8-0:1.0: 2 ports detected
[    2.130830] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.135495] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.139571] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.144027] mousedev: PS/2 mouse device common for all mice
[    2.148575] rtc_cmos 00:02: RTC can wake from S4
[    2.152891] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.156968] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.161041] i2c /dev entries driver
[    2.165224] device-mapper: uevent: version 1.0.3
[    2.169836] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.174389] ledtrig-cpu: registered to indicate activity on CPUs
[    2.179938] NET: Registered protocol family 10
[    2.184624] NET: Registered protocol family 17
[    2.188769] Key type dns_resolver registered
[    2.193515] microcode: CPU0 sig=0x30661, pf=0x4, revision=0x10a
[    2.198368] microcode: CPU1 sig=0x30661, pf=0x4, revision=0x10a
[    2.202493] microcode: CPU2 sig=0x30661, pf=0x4, revision=0x10a
[    2.206520] microcode: CPU3 sig=0x30661, pf=0x4, revision=0x10a
[    2.210597] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.215083] registered taskstats version 1
[    2.219139] Loading compiled-in X.509 certificates
[    2.228097] Loaded X.509 cert 'Build time autogenerated kernel key: 8b9fe5db9540517005e475afed63f7a6645227d6'
[    2.232345] zswap: loaded using pool lzo/zbud
[    2.241934] Key type trusted registered
[    2.256197] Key type encrypted registered
[    2.260388] AppArmor: AppArmor sha1 policy hashing enabled
[    2.264565] ima: No TPM chip found, activating TPM-bypass!
[    2.268769] evm: HMAC attrs: 0x1
[    2.273755]   Magic number: 0:649:941
[    2.278162] rtc_cmos 00:02: setting system clock to 2016-09-30 14:55:15 UTC (1475247315)
[    2.283058] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.287475] EDD information not available.
[    2.291892] PM: Hibernation image not present or could not be loaded.
[    2.296408] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    2.300772] Write protecting the kernel read-only data: 14336k
[    2.307182] Freeing unused kernel memory: 1824K (ffff880001838000 - ffff880001a00000)
[    2.309405] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[    2.317252] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    2.367383] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.369918] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.370061] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.371072] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.371291] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.371505] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.371711] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.371948] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.372174] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.372412] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.477788] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    2.489518] usb 5-1: New USB device found, idVendor=0557, idProduct=2304
[    2.494628] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.499851] usb 5-1: Product: KVM -COMPOSITE
[    2.504453] usb 5-1: Manufacturer: Kb
[    2.528583] pps_core: LinuxPPS API ver. 1 registered
[    2.534244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.540459] [drm] Initialized drm 1.1.0 20060810
[    2.548484] PTP clock support registered
[    2.554823] sata_sil24 0000:06:00.0: version 1.1
[    2.563585] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.569962] scsi host0: sata_sil24
[    2.583247] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.588406] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.594065] scsi host1: sata_sil24
[    2.597735] n5550_ahci_leds: module verification failed: signature and/or required key missing - tainting kernel
[    2.607087] ata1: SATA max UDMA/100 host m128@0x80004000 port 0x80000000 irq 17
[    2.612631] ata2: SATA max UDMA/100 host m128@0x80004000 port 0x80002000 irq 17
[    2.618536] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.624805] ahci 0000:00:1f.2: version 3.0
[    2.625494] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    2.631480] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    2.673448] tsc: Refined TSC clocksource calibration: 1862.000 MHz
[    2.679604] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35ade5b3d62, max_idle_ns: 881590641950 ns
[    2.685544] scsi host2: ahci
[    2.693606] scsi host3: ahci
[    2.705583] scsi host4: ahci
[    2.720391] scsi host5: ahci
[    2.727029] scsi host6: ahci
[    2.734098] scsi host7: ahci
[    2.740734] ata3: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504100 irq 38
[    2.742100] e1000e 0000:01:00.0 eth0: registered PHC clock
[    2.742107] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:14:fd:18:30:62
[    2.742112] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.742202] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[    2.742651] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.776288] ata4: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504180 irq 38
[    2.782201] ata5: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504200 irq 38
[    2.787959] ata6: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504280 irq 38
[    2.793530] ata7: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504300 irq 38
[    2.799178] ata8: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504380 irq 38
[    2.805217] hidraw: raw HID events driver (C) Jiri Kosina
[    2.826201] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.831013] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.835780] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.840767] [drm] No driver support for vblank timestamp query.
[    2.861582] e1000e 0000:02:00.0 eth1: registered PHC clock
[    2.864137] usbcore: registered new interface driver usbhid
[    2.864139] usbhid: USB HID core driver
[    2.877723] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:14:fd:18:30:63
[    2.883554] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection
[    2.889540] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[    2.890155] input: Kb KVM -COMPOSITE as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/0003:0557:2304.0001/input/input7
[    2.903475] e1000e 0000:01:00.0 enp1s0: renamed from eth0
[    2.945706] hid-generic 0003:0557:2304.0001: input,hidraw0: USB HID v1.10 Keyboard [Kb KVM -COMPOSITE] on usb-0000:00:1d.1-1/input0
[    2.959813] input: Kb KVM -COMPOSITE as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/0003:0557:2304.0002/input/input8
[    2.971636] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1
[    2.976263] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1                                                                                                                                                                                             
[    3.021709] hid-generic 0003:0557:2304.0002: input,hidraw1: USB HID v1.10 Device [Kb KVM -COMPOSITE] on usb-0000:00:1d.1-1/input1
[    3.028159] input: Kb KVM -COMPOSITE as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.2/0003:0557:2304.0003/input/input9
[    3.034605] hid-generic 0003:0557:2304.0003: input,hidraw2: USB HID v1.10 Mouse [Kb KVM -COMPOSITE] on usb-0000:00:1d.1-1/input2
[    3.046129] e1000e 0000:02:00.0 enp2s0: renamed from eth1
[    3.121459] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.127061] ata8: SATA link down (SStatus 0 SControl 300)
[    3.133532] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.140084] ata3: SATA link down (SStatus 0 SControl 300)
[    3.145677] ata7: SATA link down (SStatus 0 SControl 300)
[    3.150949] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.156173] ata4.00: ATA-6: ST3160023AS, 3.00, max UDMA/133
[    3.161361] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.166629] ata5.00: ATA-7: SAMSUNG HE103UJ, 1AA01118, max UDMA7
[    3.172730] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.179039] ata6.00: ATA-7: SAMSUNG HE103UJ, 1AA01113, max UDMA7
[    3.184502] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.189912] ata4.00: configured for UDMA/133
[    3.195141] ata5.00: configured for UDMA/133
[    3.201281] ata6.00: configured for UDMA/133
[    3.236070] checking generic (7f800000 500000) vs hw (7f800000 7bf000)
[    3.236076] fb: switching to psbdrmfb from VESA VGA
[    3.241328] Console: switching to colour dummy device 80x25
[    3.241774] fbcon: psbdrmfb (fb0) is primary device
[    3.697618] clocksource: Switched to clocksource tsc
[    3.901217] Console: switching to colour frame buffer device 128x48
[    3.909308] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[    3.917544] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0
[    4.697521] ata1: SATA link down (SStatus 0 SControl 0)
[    6.777631] ata2: SATA link down (SStatus 0 SControl 0)
[    6.778131] scsi 3:0:0:0: Direct-Access     ATA      ST3160023AS      3.00 PQ: 0 ANSI: 5
[    6.778900] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    6.779027] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    6.779316] sd 3:0:0:0: [sda] Write Protect is off
[    6.779413] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.779496] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.780768] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HE103UJ  1118 PQ: 0 ANSI: 5
[    6.781695] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    6.781769] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    6.781946] sd 4:0:0:0: [sdb] Write Protect is off
[    6.781952] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    6.782032] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.782749] scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG HE103UJ  1113 PQ: 0 ANSI: 5
[    6.783446] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    6.783524] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    6.784010] sd 5:0:0:0: [sdc] Write Protect is off
[    6.784129] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    6.784237] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.819493]  sdb: sdb1 sdb9
[    6.820395]  sda: sda1 sda2 < sda5 >
[    6.820544] sd 4:0:0:0: [sdb] Attached SCSI disk
[    6.826400]  sdc: sdc1 sdc9
[    6.827352] sd 5:0:0:0: [sdc] Attached SCSI disk
[    6.834814] sd 3:0:0:0: [sda] Attached SCSI disk
[    7.826167] leds-pca953x 0-0064: setting platform data
[    7.839418] leds-pca953x 0-0062: setting platform data
[    7.849306] leds-pca953x 0-0062: gpios 16...31
[    7.864030] md: linear personality registered for level -1
[    7.877612] md: multipath personality registered for level -4
[    7.891105] md: raid0 personality registered for level 0
[    7.905597] md: raid1 personality registered for level 1
[    7.993683] raid6: sse2x1   gen()   300 MB/s
[    8.061689] raid6: sse2x1   xor()   798 MB/s
[    8.129713] raid6: sse2x2   gen()   698 MB/s
[    8.197700] raid6: sse2x2   xor()  1368 MB/s
[    8.265684] raid6: sse2x4   gen()  1140 MB/s
[    8.333694] raid6: sse2x4   xor()  1581 MB/s
[    8.336738] raid6: using algorithm sse2x4 gen() 1140 MB/s
[    8.339783] raid6: .... xor() 1581 MB/s, rmw enabled
[    8.342815] raid6: using ssse3x2 recovery algorithm
[    8.351693] xor: measuring software checksum speed
[    8.393684]    prefetch64-sse:  5415.000 MB/sec
[    8.433685]    generic_sse:  4920.000 MB/sec
[    8.437006] xor: using function: prefetch64-sse (5415.000 MB/sec)
[    8.446078] async_tx: api initialized (async)
[    8.483352] md: raid6 personality registered for level 6
[    8.487215] md: raid5 personality registered for level 5
[    8.490469] md: raid4 personality registered for level 4
[    8.511877] md: raid10 personality registered for level 10
[    8.618935] Btrfs loaded
[    8.753117] random: nonblocking pool is initialized
[    9.054746] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.440972] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   10.447734] systemd[1]: Detected architecture x86-64.
[   10.478592] systemd[1]: Set hostname to <ubuntu>.
[   12.501767] systemd[1]: Listening on LVM2 metadata daemon socket.
[   12.508615] systemd[1]: Listening on fsck to fsckd communication Socket.
[   12.515524] systemd[1]: Listening on Journal Audit Socket.
[   12.522430] systemd[1]: Listening on Journal Socket (/dev/log).
[   12.530484] systemd[1]: Created slice System Slice.
[   12.537730] systemd[1]: Listening on LVM2 poll daemon socket.
[   12.545479] systemd[1]: Listening on Syslog Socket.
[   12.553641] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   12.561628] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   12.570698] systemd[1]: Created slice system-getty.slice.
[   12.578864] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   12.587336] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   12.596297] systemd[1]: Listening on udev Kernel Socket.
[   12.605733] systemd[1]: Created slice User and Session Slice.
[   12.614295] systemd[1]: Reached target User and Group Name Lookups.
[   12.622971] systemd[1]: Listening on Journal Socket.
[   12.682280] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   12.693478] systemd[1]: Mounting Debug File System...
[   12.705302] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   12.716781] systemd[1]: Mounting Huge Pages File System...
[   12.729737] systemd[1]: Mounting POSIX Message Queue File System...
[   12.741632] systemd[1]: Starting Uncomplicated firewall...
[   12.753278] systemd[1]: Starting Nameserver information manager...
[   13.006359] systemd[1]: Starting Load Kernel Modules...
[   13.017921] systemd[1]: Started Read required files in advance.
[   13.030046] systemd[1]: Starting Journal Service...
[   13.039095] systemd[1]: Listening on udev Control Socket.
[   13.048075] systemd[1]: Reached target Slices.
[   13.056831] systemd[1]: Reached target Encrypted Volumes.
[   13.071264] systemd[1]: Mounted Debug File System.
[   13.080167] systemd[1]: Mounted POSIX Message Queue File System.
[   13.089040] systemd[1]: Mounted Huge Pages File System.
[   13.099179] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   13.156743] systemd[1]: Started Uncomplicated firewall.
[   13.262392] systemd[1]: Starting Create Static Device Nodes in /dev...
[   13.310340] systemd[1]: Started Nameserver information manager.
[   13.450733] Loading iSCSI transport class v2.0-870.
[   13.634576] iscsi: registered transport (tcp)
[   13.806459] systemd[1]: Started LVM2 metadata daemon.
[   13.869144] systemd[1]: Started Journal Service.
[   14.307963] iscsi: registered transport (iser)
[   16.132431] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   16.582177] systemd-journald[438]: Received request to flush runtime journal from PID 1
[   17.344300] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.176678] gpio_ich: GPIO from 451 to 511 on gpio_ich
[   18.554093] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC262: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   18.554103] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.554109] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.554114] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   18.554119] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   18.554124] snd_hda_codec_realtek hdaudioC0D2:      Mic=0x18
[   18.554130] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   18.564729] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   18.565039] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   18.565327] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   18.565623] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   20.664109] audit: type=1400 audit(1475247333.879:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=782 comm="apparmor_parser"
[   20.670129] audit: type=1400 audit(1475247333.883:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lxd/lxd-bridge-proxy" pid=785 comm="apparmor_parser"
[   20.674041] audit: type=1400 audit(1475247333.887:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=781 comm="apparmor_parser"
[   20.674074] audit: type=1400 audit(1475247333.887:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=781 comm="apparmor_parser"
[   20.674102] audit: type=1400 audit(1475247333.887:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=781 comm="apparmor_parser"
[   20.674129] audit: type=1400 audit(1475247333.887:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=781 comm="apparmor_parser"
[   20.675254] audit: type=1400 audit(1475247333.891:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=783 comm="apparmor_parser"
[   20.680068] audit: type=1400 audit(1475247333.895:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=780 comm="apparmor_parser"
[   20.680101] audit: type=1400 audit(1475247333.895:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=780 comm="apparmor_parser"
[   20.680127] audit: type=1400 audit(1475247333.895:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=780 comm="apparmor_parser"
[   20.718081] Adding 2050044k swap on /dev/sda5.  Priority:-1 extents:1 across:2050044k FS
[   21.223237] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   21.393184] cgroup: new mount options do not match the existing superblock, will be ignored
[   23.935644] e1000e: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   23.936014] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[  618.643611] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

Best regards Manfred

mheubach commented 8 years ago

dmesg with acpi_enforce_resources=lax

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-38-generic (buildd@lgw01-58) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #57-Ubuntu SMP Tue Sep 6 15:42:33 UTC 2016 (Ubuntu 4.4.0-38.57-generic 4.4.19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=db91dd98-378c-4c52-bd91-3b10a08e560b ro acpi_enforce_resources=lax
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077bacfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077bad000-0x0000000077daefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077daf000-0x000000007d5e6fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d5e7000-0x000000007f5cefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f5cf000-0x000000007f6cefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6cf000-0x000000007f6eefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f6ef000-0x000000007f6effff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe20000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Intel Corporation Milstead Platform/Granite Well, BIOS CDV_T30 X64 09/17/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   4 base 07F6F0000 mask FFFFF0000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33bba000-0x35dd4fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 PTL   )
[    0.000000] ACPI: XSDT 0x000000007F6EE120 00007C (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: FACP 0x000000007F6E5000 0000F4 (v03 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 0x000000007F6E7000 00483B (v02 PTL    OEMTABLE 00000001 INTL 20061109)
[    0.000000] ACPI: FACS 0x000000007F665000 000040
[    0.000000] ACPI: FACS 0x000000007F665000 000040
[    0.000000] ACPI: SLIC 0x000000007F6ED000 000176 (v01 PTL    OEMTABLE 00000002 PTL  00000001)
[    0.000000] ACPI: SSDT 0x000000007F6EC000 00043E (v01 PTL    PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: HPET 0x000000007F6E4000 000038 (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 0x000000007F6E3000 000078 (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 0x000000007F6E2000 00003C (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x000000007F6E1000 000655 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x000000007F6E0000 00003E (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x000000007F6DF000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: POAT 0x000000007F6DE000 000055 (v03 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x000000007F6DD000 00013E (v01 PTL    OEMTABLE 00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f6effff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7d5e1000-0x7d5e5fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6effff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000077bacfff]
[    0.000000]   node   0: [mem 0x0000000077daf000-0x000000007d5e6fff]
[    0.000000]   node   0: [mem 0x000000007f6ef000-0x000000007f6effff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[    0.000000] On node 0 totalpages: 512899
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 508902 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x77bad000-0x77daefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d5e7000-0x7f5cefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f5cf000-0x7f6cefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f6cf000-0x7f6eefff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007d000000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 504722
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=db91dd98-378c-4c52-bd91-3b10a08e560b ro acpi_enforce_resources=lax
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1964552K/2051596K available (8404K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 87044K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1861.947 MHz processor
[    0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.89 BogoMIPS (lpj=7447788)
[    0.000083] pid_max: default: 32768 minimum: 301
[    0.000106] ACPI: Core revision 20150930
[    0.012381] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.012462] Security Framework initialized
[    0.012477] Yama: becoming mindful.
[    0.012525] AppArmor: AppArmor initialized
[    0.012953] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.014689] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.015503] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.015533] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016099] Initializing cgroup subsys io
[    0.016127] Initializing cgroup subsys memory
[    0.016157] Initializing cgroup subsys devices
[    0.016176] Initializing cgroup subsys freezer
[    0.016193] Initializing cgroup subsys net_cls
[    0.016210] Initializing cgroup subsys perf_event
[    0.016227] Initializing cgroup subsys net_prio
[    0.016249] Initializing cgroup subsys hugetlb
[    0.016265] Initializing cgroup subsys pids
[    0.016321] CPU: Physical Processor ID: 0
[    0.016335] CPU: Processor Core ID: 0
[    0.016348] mce: CPU supports 5 MCE banks
[    0.016371] CPU0: Thermal monitoring enabled (TM1)
[    0.016388] process: using mwait in idle threads
[    0.016406] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.016420] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.016917] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[    0.020067] ftrace: allocating 32006 entries in 126 pages
[    0.045154] smpboot: Max logical packages: 2
[    0.045174] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.045758] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.190458] smpboot: CPU0: Intel(R) Atom(TM) CPU D2550   @ 1.86GHz (family: 0x6, model: 0x36, stepping: 0x1)
[    0.190518] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.190559] ... version:                3
[    0.190570] ... bit width:              40
[    0.190582] ... generic registers:      2
[    0.190593] ... value mask:             000000ffffffffff
[    0.190605] ... max period:             000000007fffffff
[    0.190617] ... fixed-purpose events:   3
[    0.190628] ... event mask:             0000000700000003
[    0.192505] x86: Booting SMP configuration:
[    0.192524] .... node  #0, CPUs:      #1
[    0.192666] CPU1: Thermal monitoring handled by SMI
[    0.194910] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.195246]  #2
[    0.195342] CPU2: Thermal monitoring handled by SMI
[    0.197673]  #3
[    0.197779] CPU3: Thermal monitoring handled by SMI
[    0.199874] x86: Booted up 1 node, 4 CPUs
[    0.199892] smpboot: Total of 4 processors activated (14895.57 BogoMIPS)
[    0.201034] devtmpfs: initialized
[    0.207831] evm: security.selinux
[    0.207846] evm: security.SMACK64
[    0.207857] evm: security.SMACK64EXEC
[    0.207868] evm: security.SMACK64TRANSMUTE
[    0.207879] evm: security.SMACK64MMAP
[    0.207890] evm: security.ima
[    0.207901] evm: security.capability
[    0.208109] PM: Registering ACPI NVS region [mem 0x7f5cf000-0x7f6cefff] (1048576 bytes)
[    0.208379] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.208624] pinctrl core: initialized pinctrl subsystem
[    0.208916] RTC time: 15:26:49, date: 09/30/16
[    0.209233] NET: Registered protocol family 16
[    0.218475] cpuidle: using governor ladder
[    0.230469] cpuidle: using governor menu
[    0.230489] PCCT header not found.
[    0.230665] ACPI: bus type PCI registered
[    0.230681] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.230895] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.230922] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.230966] PCI: Using configuration type 1 for base access
[    0.247567] ACPI: Added _OSI(Module Device)
[    0.247586] ACPI: Added _OSI(Processor Device)
[    0.247599] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.247612] ACPI: Added _OSI(Processor Aggregator Device)
[    0.252341] ACPI: Executed 1 blocks of module-level executable AML code
[    0.255990] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.258678] ACPI: Interpreter enabled
[    0.258715] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.258777] ACPI: (supports S0 S1 S3 S4 S5)
[    0.258791] ACPI: Using IOAPIC for interrupt routing
[    0.258880] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.272481] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.272511] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.272635] \_SB_.PCI0:_OSC invalid UUID
[    0.272639] _OSC request data:1 1f 0 
[    0.272649] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.273477] PCI host bridge to bus 0000:00
[    0.273496] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.273512] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.273527] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.273549] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.273571] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.273593] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.273615] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[    0.273637] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.273659] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.273681] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.273709] pci 0000:00:00.0: [8086:0bf3] type 00 class 0x060000
[    0.273976] pci 0000:00:02.0: [8086:0be2] type 00 class 0x030000
[    0.274000] pci 0000:00:02.0: reg 0x10: [mem 0x80400000-0x804fffff]
[    0.274010] pci 0000:00:02.0: reg 0x14: [io  0x50d0-0x50d7]
[    0.274300] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.274401] pci 0000:00:1a.0: reg 0x20: [io  0x50a0-0x50bf]
[    0.274643] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.274796] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.274852] pci 0000:00:1a.7: reg 0x10: [mem 0x80504c00-0x80504fff]
[    0.274994] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.275125] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.275252] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[    0.275310] pci 0000:00:1b.0: reg 0x10: [mem 0x80500000-0x80503fff 64bit]
[    0.275454] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.275688] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.275834] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.275968] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.276097] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
[    0.276243] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.276376] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.276497] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
[    0.276632] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.276767] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.276887] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
[    0.277020] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.277155] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.277279] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[    0.277439] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.277578] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.277698] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[    0.277842] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.278064] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.278168] pci 0000:00:1d.0: reg 0x20: [io  0x5080-0x509f]
[    0.278393] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.278536] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.278638] pci 0000:00:1d.1: reg 0x20: [io  0x5060-0x507f]
[    0.278872] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.278999] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.279107] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.279331] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.279469] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.279526] pci 0000:00:1d.7: reg 0x10: [mem 0x80504800-0x80504bff]
[    0.279669] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.279796] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.279920] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.280132] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.280251] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[    0.280402] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0400-0x047f]: address conflict with ACPI CPU throttle [io  0x0410-0x0415]
[    0.280432] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.280449] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0007)
[    0.280706] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[    0.280757] pci 0000:00:1f.2: reg 0x10: [io  0x50c8-0x50cf]
[    0.280774] pci 0000:00:1f.2: reg 0x14: [io  0x50dc-0x50df]
[    0.280791] pci 0000:00:1f.2: reg 0x18: [io  0x50c0-0x50c7]
[    0.280808] pci 0000:00:1f.2: reg 0x1c: [io  0x50d8-0x50db]
[    0.280825] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    0.280842] pci 0000:00:1f.2: reg 0x24: [mem 0x80504000-0x805047ff]
[    0.280911] pci 0000:00:1f.2: PME# supported from D3hot
[    0.281135] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    0.281175] pci 0000:00:1f.3: reg 0x10: [mem 0x80505000-0x805050ff 64bit]
[    0.281215] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.281619] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000
[    0.281709] pci 0000:01:00.0: reg 0x10: [mem 0x80300000-0x8031ffff]
[    0.281757] pci 0000:01:00.0: reg 0x18: [io  0x4000-0x401f]
[    0.281784] pci 0000:01:00.0: reg 0x1c: [mem 0x80320000-0x80323fff]
[    0.281961] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.282046] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.286500] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.286520] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.286529] pci 0000:00:1c.0:   bridge window [mem 0x80300000-0x803fffff]
[    0.286710] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
[    0.286801] pci 0000:02:00.0: reg 0x10: [mem 0x80200000-0x8021ffff]
[    0.286851] pci 0000:02:00.0: reg 0x18: [io  0x3000-0x301f]
[    0.286877] pci 0000:02:00.0: reg 0x1c: [mem 0x80220000-0x80223fff]
[    0.287056] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.287144] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.294493] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.294513] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.294522] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x802fffff]
[    0.294663] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.294817] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.295017] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[    0.295116] pci 0000:05:00.0: reg 0x10: [mem 0x80100000-0x80101fff 64bit]
[    0.295343] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.295438] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.302496] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.302521] pci 0000:00:1c.4:   bridge window [mem 0x80100000-0x801fffff]
[    0.302663] pci 0000:06:00.0: [1095:3132] type 00 class 0x018000
[    0.302744] pci 0000:06:00.0: reg 0x10: [mem 0x80004000-0x8000407f 64bit]
[    0.302781] pci 0000:06:00.0: reg 0x18: [mem 0x80000000-0x80003fff 64bit]
[    0.302805] pci 0000:06:00.0: reg 0x20: [io  0x2000-0x207f]
[    0.302848] pci 0000:06:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.302934] pci 0000:06:00.0: supports D1 D2
[    0.303050] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.303090] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.303108] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.303116] pci 0000:00:1c.5:   bridge window [mem 0x80000000-0x800fffff]
[    0.303273] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.303305] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.303311] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.303317] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.303323] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.303328] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.303334] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.303340] pci 0000:00:1e.0:   bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[    0.303346] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.303351] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.304720] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.304908] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.305089] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.305271] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.305452] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.305641] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.305832] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.306014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.306448] ACPI: Enabled 11 GPEs in block 00 to 3F
[    0.306845] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.306864] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.306893] vgaarb: loaded
[    0.306905] vgaarb: bridge control possible 0000:00:02.0
[    0.307598] SCSI subsystem initialized
[    0.307756] libata version 3.00 loaded.
[    0.307825] ACPI: bus type USB registered
[    0.307900] usbcore: registered new interface driver usbfs
[    0.307939] usbcore: registered new interface driver hub
[    0.308007] usbcore: registered new device driver usb
[    0.308456] PCI: Using ACPI for IRQ routing
[    0.321038] PCI: pci_cache_line_size set to 64 bytes
[    0.321170] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.321175] e820: reserve RAM buffer [mem 0x77bad000-0x77ffffff]
[    0.321179] e820: reserve RAM buffer [mem 0x7d5e7000-0x7fffffff]
[    0.321183] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[    0.321488] NetLabel: Initializing
[    0.321504] NetLabel:  domain hash size = 128
[    0.321515] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.321551] NetLabel:  unlabeled traffic allowed by default
[    0.321774] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.321797] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.323847] amd_nb: Cannot enumerate AMD northbridges
[    0.323899] clocksource: Switched to clocksource hpet
[    0.343799] AppArmor: AppArmor Filesystem Enabled
[    0.344024] pnp: PnP ACPI init
[    0.344366] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.344387] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.344402] system 00:00: [io  0x1010-0x1013] has been reserved
[    0.344422] system 00:00: [io  0xffff] has been reserved
[    0.344438] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.344454] system 00:00: [io  0x0500-0x057f] could not be reserved
[    0.344474] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.344631] system 00:01: [io  0x06a0-0x06af] has been reserved
[    0.344649] system 00:01: [io  0x06b0-0x06ff] has been reserved
[    0.344668] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.344753] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.345338] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.345845] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.346146] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.346167] system 00:05: [mem 0x00000000-0x00003fff] could not be reserved
[    0.346184] system 00:05: [mem 0x00000000-0x00000fff] could not be reserved
[    0.346200] system 00:05: [mem 0x00000000-0x00000fff] could not be reserved
[    0.346216] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.346235] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.346597] pnp: PnP ACPI: found 6 devices
[    0.357170] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.357215] pci 0000:06:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.357270] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.357295] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.357314] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.357321] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.357328] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.357347] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.357354] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.357361] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.357380] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    0.357387] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[    0.357407] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[    0.357440] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.357461] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357467] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357474] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357480] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357487] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.357493] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.357499] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357506] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357512] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.357518] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.357525] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357531] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357538] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357544] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357551] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357557] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357563] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.357569] pci 0000:00:1c.2: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.357575] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.357581] pci 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.357587] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.357593] pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.357614] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.357646] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.357672] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80a00000-0x80bfffff]
[    0.357696] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80c00000-0x80dfffff 64bit pref]
[    0.357722] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80e00000-0x80ffffff]
[    0.357746] pci 0000:00:1c.3: BAR 15: assigned [mem 0x81000000-0x811fffff 64bit pref]
[    0.357777] pci 0000:00:1c.4: BAR 15: assigned [mem 0x81200000-0x813fffff 64bit pref]
[    0.357808] pci 0000:00:1c.5: BAR 15: assigned [mem 0x81400000-0x815fffff 64bit pref]
[    0.357833] pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
[    0.357850] pci 0000:00:1c.3: BAR 13: assigned [io  0x7000-0x7fff]
[    0.357866] pci 0000:00:1c.4: BAR 13: assigned [io  0x8000-0x8fff]
[    0.357887] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.357903] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.357925] pci 0000:00:1c.0:   bridge window [mem 0x80300000-0x803fffff]
[    0.357944] pci 0000:00:1c.0:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.357973] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.357989] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.358008] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x802fffff]
[    0.358027] pci 0000:00:1c.1:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.358056] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.358072] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
[    0.358092] pci 0000:00:1c.2:   bridge window [mem 0x80a00000-0x80bfffff]
[    0.358111] pci 0000:00:1c.2:   bridge window [mem 0x80c00000-0x80dfffff 64bit pref]
[    0.358140] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.358155] pci 0000:00:1c.3:   bridge window [io  0x7000-0x7fff]
[    0.358175] pci 0000:00:1c.3:   bridge window [mem 0x80e00000-0x80ffffff]
[    0.358193] pci 0000:00:1c.3:   bridge window [mem 0x81000000-0x811fffff 64bit pref]
[    0.358222] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.358238] pci 0000:00:1c.4:   bridge window [io  0x8000-0x8fff]
[    0.358257] pci 0000:00:1c.4:   bridge window [mem 0x80100000-0x801fffff]
[    0.358276] pci 0000:00:1c.4:   bridge window [mem 0x81200000-0x813fffff 64bit pref]
[    0.358308] pci 0000:06:00.0: BAR 6: assigned [mem 0x80080000-0x800fffff pref]
[    0.358330] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.358346] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.358367] pci 0000:00:1c.5:   bridge window [mem 0x80000000-0x800fffff]
[    0.358386] pci 0000:00:1c.5:   bridge window [mem 0x81400000-0x815fffff 64bit pref]
[    0.358417] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.358451] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.358456] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.358462] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.358467] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.358473] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[    0.358478] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.358484] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.358489] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.358495] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window]
[    0.358500] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.358506] pci_bus 0000:01: resource 1 [mem 0x80300000-0x803fffff]
[    0.358511] pci_bus 0000:01: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.358517] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.358522] pci_bus 0000:02: resource 1 [mem 0x80200000-0x802fffff]
[    0.358527] pci_bus 0000:02: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.358533] pci_bus 0000:03: resource 0 [io  0x6000-0x6fff]
[    0.358538] pci_bus 0000:03: resource 1 [mem 0x80a00000-0x80bfffff]
[    0.358543] pci_bus 0000:03: resource 2 [mem 0x80c00000-0x80dfffff 64bit pref]
[    0.358549] pci_bus 0000:04: resource 0 [io  0x7000-0x7fff]
[    0.358554] pci_bus 0000:04: resource 1 [mem 0x80e00000-0x80ffffff]
[    0.358560] pci_bus 0000:04: resource 2 [mem 0x81000000-0x811fffff 64bit pref]
[    0.358565] pci_bus 0000:05: resource 0 [io  0x8000-0x8fff]
[    0.358570] pci_bus 0000:05: resource 1 [mem 0x80100000-0x801fffff]
[    0.358576] pci_bus 0000:05: resource 2 [mem 0x81200000-0x813fffff 64bit pref]
[    0.358581] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.358586] pci_bus 0000:06: resource 1 [mem 0x80000000-0x800fffff]
[    0.358592] pci_bus 0000:06: resource 2 [mem 0x81400000-0x815fffff 64bit pref]
[    0.358598] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.358603] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.358609] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.358614] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.358620] pci_bus 0000:07: resource 8 [mem 0x000e0000-0x000effff window]
[    0.358625] pci_bus 0000:07: resource 9 [mem 0x000f0000-0x000fffff window]
[    0.358631] pci_bus 0000:07: resource 10 [mem 0x7f800000-0x7fffffff window]
[    0.358636] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.358642] pci_bus 0000:07: resource 12 [mem 0xfed40000-0xfed44fff window]
[    0.358726] NET: Registered protocol family 2
[    0.359168] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.359318] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.359458] TCP: Hash tables configured (established 16384 bind 16384)
[    0.359577] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.359627] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.359827] NET: Registered protocol family 1
[    0.359884] pci 0000:00:02.0: Video device with shadowed ROM
[    0.361798] PCI: CLS 64 bytes, default 64
[    0.361944] Trying to unpack rootfs image as initramfs...
[    1.673066] Freeing initrd memory: 34924K (ffff880033bba000 - ffff880035dd5000)
[    1.673483] Scanning for low memory corruption every 60 seconds
[    1.674441] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.674528] audit: initializing netlink subsys (disabled)
[    1.674589] audit: type=2000 audit(1475249209.564:1): initialized
[    1.675421] Initialise system trusted keyring
[    1.675796] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.680685] zbud: loaded
[    1.681237] VFS: Disk quotas dquot_6.6.0
[    1.681356] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.682193] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.683016] fuse init (API version 7.23)
[    1.683490] Key type big_key registered
[    1.683550] Allocating IMA MOK and blacklist keyrings.
[    1.684834] Key type asymmetric registered
[    1.684853] Asymmetric key parser 'x509' registered
[    1.684987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.685113] io scheduler noop registered
[    1.685130] io scheduler deadline registered (default)
[    1.685238] io scheduler cfq registered
[    1.686182] pcieport 0000:00:1c.2: enabling device (0000 -> 0003)
[    1.686482] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
[    1.687269] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.687301] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.687408] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    1.687422] vesafb: scrolling: redraw
[    1.687436] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.687464] pmd_set_huge: Cannot satisfy [mem 0x7f800000-0x7fa00000] with a huge-page mapping due to MTRR override.
[    1.687516] vesafb: framebuffer at 0x7f800000, mapped to 0xffffc90000800000, using 5120k, total 5120k
[    1.700943] Console: switching to colour frame buffer device 160x64
[    1.714057] fb0: VESA VGA frame buffer device
[    1.714185] intel_idle: MWAIT substates: 0x10
[    1.714190] intel_idle: v0.4.1 model 0x36
[    1.714193] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.714544] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.714686] ACPI: Power Button [PWRB]
[    1.714861] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.714998] ACPI: Sleep Button [SLPB]
[    1.715169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.715292] ACPI: Power Button [PWRF]
[    1.716161] GHES: HEST is not enabled!
[    1.716521] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.737442] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.758473] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.763421] Linux agpgart interface v0.103
[    1.772551] brd: module loaded
[    1.776721] loop: module loaded
[    1.777417] libphy: Fixed MDIO Bus: probed
[    1.777496] tun: Universal TUN/TAP device driver, 1.6
[    1.777578] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.777830] PPP generic driver version 2.4.2
[    1.778082] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.778200] ehci-pci: EHCI PCI platform driver
[    1.778503] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.778606] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.778746] ehci-pci 0000:00:1a.7: debug port 1
[    1.782743] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.782786] ehci-pci 0000:00:1a.7: irq 18, io mem 0x80504c00
[    1.791973] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.792181] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.792295] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.792410] usb usb1: Product: EHCI Host Controller
[    1.792491] usb usb1: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[    1.792592] usb usb1: SerialNumber: 0000:00:1a.7
[    1.793017] hub 1-0:1.0: USB hub found
[    1.793107] hub 1-0:1.0: 2 ports detected
[    1.793657] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.793774] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.793924] ehci-pci 0000:00:1d.7: debug port 1
[    1.797941] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.797974] ehci-pci 0000:00:1d.7: irq 23, io mem 0x80504800
[    1.807967] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.808186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.808299] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.812660] usb usb2: Product: EHCI Host Controller
[    1.816984] usb usb2: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[    1.821306] usb usb2: SerialNumber: 0000:00:1d.7
[    1.825929] hub 2-0:1.0: USB hub found
[    1.830254] hub 2-0:1.0: 6 ports detected
[    1.834986] ehci-platform: EHCI generic platform driver
[    1.839328] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.843662] ohci-pci: OHCI PCI platform driver
[    1.847998] ohci-platform: OHCI generic platform driver
[    1.852275] uhci_hcd: USB Universal Host Controller Interface driver
[    1.856782] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.861100] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.865462] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.869825] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050a0
[    1.874322] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.878711] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.883078] usb usb3: Product: UHCI Host Controller
[    1.887411] usb usb3: Manufacturer: Linux 4.4.0-38-generic uhci_hcd
[    1.891765] usb usb3: SerialNumber: 0000:00:1a.0
[    1.896525] hub 3-0:1.0: USB hub found
[    1.900853] hub 3-0:1.0: 2 ports detected
[    1.905542] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.909783] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.913996] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.918171] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
[    1.922439] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.926566] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.930634] usb usb4: Product: UHCI Host Controller
[    1.934681] usb usb4: Manufacturer: Linux 4.4.0-38-generic uhci_hcd
[    1.938663] usb usb4: SerialNumber: 0000:00:1d.0
[    1.942937] hub 4-0:1.0: USB hub found
[    1.946846] hub 4-0:1.0: 2 ports detected
[    1.951172] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.955086] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    1.958980] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.963167] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[    1.967222] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.971142] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.975087] usb usb5: Product: UHCI Host Controller
[    1.979022] usb usb5: Manufacturer: Linux 4.4.0-38-generic uhci_hcd
[    1.982983] usb usb5: SerialNumber: 0000:00:1d.1
[    1.987262] hub 5-0:1.0: USB hub found
[    1.991195] hub 5-0:1.0: 2 ports detected
[    1.995538] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.999439] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    2.003646] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.007598] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    2.011639] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.015587] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.019545] usb usb6: Product: UHCI Host Controller
[    2.023456] usb usb6: Manufacturer: Linux 4.4.0-38-generic uhci_hcd
[    2.027390] usb usb6: SerialNumber: 0000:00:1d.2
[    2.031635] hub 6-0:1.0: USB hub found
[    2.035613] hub 6-0:1.0: 2 ports detected
[    2.040021] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.043909] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 7
[    2.053264] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    2.057674] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    2.061704] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.065717] usb usb7: Product: xHCI Host Controller
[    2.069729] usb usb7: Manufacturer: Linux 4.4.0-38-generic xhci-hcd
[    2.073784] usb usb7: SerialNumber: 0000:05:00.0
[    2.078157] hub 7-0:1.0: USB hub found
[    2.082193] hub 7-0:1.0: 2 ports detected
[    2.086451] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.090475] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8
[    2.094557] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.098927] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[    2.103027] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.107125] usb usb8: Product: xHCI Host Controller
[    2.111194] usb usb8: Manufacturer: Linux 4.4.0-38-generic xhci-hcd
[    2.115279] usb usb8: SerialNumber: 0000:05:00.0
[    2.119695] hub 8-0:1.0: USB hub found
[    2.123780] hub 8-0:1.0: 2 ports detected
[    2.128231] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.132900] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.136984] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.141809] mousedev: PS/2 mouse device common for all mice
[    2.146373] rtc_cmos 00:02: RTC can wake from S4
[    2.150696] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.154777] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.158851] i2c /dev entries driver
[    2.163038] device-mapper: uevent: version 1.0.3
[    2.167643] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.172213] ledtrig-cpu: registered to indicate activity on CPUs
[    2.177744] NET: Registered protocol family 10
[    2.182527] NET: Registered protocol family 17
[    2.186715] Key type dns_resolver registered
[    2.191467] microcode: CPU0 sig=0x30661, pf=0x4, revision=0x10a
[    2.195608] microcode: CPU1 sig=0x30661, pf=0x4, revision=0x10a
[    2.199674] microcode: CPU2 sig=0x30661, pf=0x4, revision=0x10a
[    2.204066] microcode: CPU3 sig=0x30661, pf=0x4, revision=0x10a
[    2.209266] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.213769] registered taskstats version 1
[    2.217933] Loading compiled-in X.509 certificates
[    2.226920] Loaded X.509 cert 'Build time autogenerated kernel key: 8b9fe5db9540517005e475afed63f7a6645227d6'
[    2.231177] zswap: loaded using pool lzo/zbud
[    2.240879] Key type trusted registered
[    2.255286] Key type encrypted registered
[    2.259460] AppArmor: AppArmor sha1 policy hashing enabled
[    2.263616] ima: No TPM chip found, activating TPM-bypass!
[    2.267821] evm: HMAC attrs: 0x1
[    2.272779]   Magic number: 0:240:438
[    2.277176] rtc_cmos 00:02: setting system clock to 2016-09-30 15:26:51 UTC (1475249211)
[    2.282064] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.286672] EDD information not available.
[    2.291104] PM: Hibernation image not present or could not be loaded.
[    2.295617] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    2.299994] Write protecting the kernel read-only data: 14336k
[    2.304494] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[    2.310673] Freeing unused kernel memory: 1824K (ffff880001838000 - ffff880001a00000)
[    2.316455] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    2.365734] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.368225] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.368372] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.369377] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.369600] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.369816] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.370031] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.370272] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.370512] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.370747] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    2.476452] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    2.488088] usb 5-1: New USB device found, idVendor=0557, idProduct=2304
[    2.493324] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.498205] usb 5-1: Product: KVM -COMPOSITE
[    2.502808] usb 5-1: Manufacturer: Kb
[    2.522805] pps_core: LinuxPPS API ver. 1 registered
[    2.528286] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.534695] [drm] Initialized drm 1.1.0 20060810
[    2.541970] PTP clock support registered
[    2.542066] sata_sil24 0000:06:00.0: version 1.1
[    2.544058] scsi host0: sata_sil24
[    2.544471] scsi host1: sata_sil24
[    2.544647] ata1: SATA max UDMA/100 host m128@0x80004000 port 0x80000000 irq 17
[    2.544654] ata2: SATA max UDMA/100 host m128@0x80004000 port 0x80002000 irq 17
[    2.567503] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.586040] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.591371] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.597011] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.607603] n5550_ahci_leds: module verification failed: signature and/or required key missing - tainting kernel
[    2.622227] ahci 0000:00:1f.2: version 3.0
[    2.622736] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    2.627283] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    2.672084] tsc: Refined TSC clocksource calibration: 1862.000 MHz
[    2.678087] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35ade5b3d62, max_idle_ns: 881590641950 ns
[    2.692228] scsi host2: ahci
[    2.708127] scsi host3: ahci
[    2.722181] scsi host4: ahci
[    2.729472] e1000e 0000:01:00.0 eth0: registered PHC clock
[    2.730342] scsi host5: ahci
[    2.730700] scsi host6: ahci
[    2.732225] scsi host7: ahci
[    2.732523] ata3: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504100 irq 38
[    2.732530] ata4: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504180 irq 38
[    2.732536] ata5: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504200 irq 38
[    2.732541] ata6: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504280 irq 38
[    2.732547] ata7: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504300 irq 38
[    2.732553] ata8: SATA max UDMA/133 abar m2048@0x80504000 port 0x80504380 irq 38
[    2.760715] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.761071] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.761320] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.761321] [drm] No driver support for vblank timestamp query.
[    2.806485] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:14:fd:18:30:62
[    2.811990] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.817392] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[    2.823078] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.828847] hidraw: raw HID events driver (C) Jiri Kosina
[    2.884481] usbcore: registered new interface driver usbhid
[    2.889310] usbhid: USB HID core driver
[    2.893991] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1
[    2.898287] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1                                                                                                                                                                                             
[    2.903417] input: Kb KVM -COMPOSITE as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/0003:0557:2304.0001/input/input7
[    2.944073] e1000e 0000:02:00.0 eth1: registered PHC clock
[    2.949251] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:14:fd:18:30:63
[    2.954492] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection
[    2.959749] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[    2.964365] hid-generic 0003:0557:2304.0001: input,hidraw0: USB HID v1.10 Keyboard [Kb KVM -COMPOSITE] on usb-0000:00:1d.1-1/input0
[    2.972536] input: Kb KVM -COMPOSITE as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/0003:0557:2304.0002/input/input8
[    2.972923] e1000e 0000:01:00.0 enp1s0: renamed from eth0
[    3.040313] hid-generic 0003:0557:2304.0002: input,hidraw1: USB HID v1.10 Device [Kb KVM -COMPOSITE] on usb-0000:00:1d.1-1/input1
[    3.046593] input: Kb KVM -COMPOSITE as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.2/0003:0557:2304.0003/input/input9
[    3.052038] ata3: SATA link down (SStatus 0 SControl 300)
[    3.058452] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.058794] hid-generic 0003:0557:2304.0003: input,hidraw2: USB HID v1.10 Mouse [Kb KVM -COMPOSITE] on usb-0000:00:1d.1-1/input2
[    3.070973] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.077459] ata7: SATA link down (SStatus 0 SControl 300)
[    3.084036] ata8: SATA link down (SStatus 0 SControl 300)
[    3.084091] ata4.00: ATA-6: ST3160023AS, 3.00, max UDMA/133
[    3.084096] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.084161] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.084190] ata6.00: ATA-7: SAMSUNG HE103UJ, 1AA01113, max UDMA7
[    3.084195] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.089282] ata4.00: configured for UDMA/133
[    3.090638] ata5.00: ATA-7: SAMSUNG HE103UJ, 1AA01118, max UDMA7
[    3.090643] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.090752] ata6.00: configured for UDMA/133
[    3.095080] e1000e 0000:02:00.0 enp2s0: renamed from eth1
[    3.097236] ata5.00: configured for UDMA/133
[    3.158620] checking generic (7f800000 500000) vs hw (7f800000 7bf000)
[    3.158627] fb: switching to psbdrmfb from VESA VGA
[    3.164044] Console: switching to colour dummy device 80x25
[    3.164469] fbcon: psbdrmfb (fb0) is primary device
[    3.684197] clocksource: Switched to clocksource tsc
[    3.815764] Console: switching to colour frame buffer device 128x48
[    3.823841] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[    3.832123] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0
[    4.632059] ata1: SATA link down (SStatus 0 SControl 0)
[    6.712121] ata2: SATA link down (SStatus 0 SControl 0)
[    6.712642] scsi 3:0:0:0: Direct-Access     ATA      ST3160023AS      3.00 PQ: 0 ANSI: 5
[    6.713421] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    6.713537] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    6.713995] sd 3:0:0:0: [sda] Write Protect is off
[    6.714041] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HE103UJ  1118 PQ: 0 ANSI: 5
[    6.714297] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.714417] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.714563] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    6.714704] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    6.714802] sd 4:0:0:0: [sdb] Write Protect is off
[    6.714809] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    6.714895] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.715825] scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG HE103UJ  1113 PQ: 0 ANSI: 5
[    6.716692] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    6.716875] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    6.717068] sd 5:0:0:0: [sdc] Write Protect is off
[    6.717185] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    6.717304] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.743121]  sdc: sdc1 sdc9
[    6.744032] sd 5:0:0:0: [sdc] Attached SCSI disk
[    6.745388]  sdb: sdb1 sdb9
[    6.746379] sd 4:0:0:0: [sdb] Attached SCSI disk
[    6.755631]  sda: sda1 sda2 < sda5 >
[    6.760183] sd 3:0:0:0: [sda] Attached SCSI disk
[    7.755844] leds-pca953x 0-0064: setting platform data
[    7.767806] leds-pca953x 0-0062: setting platform data
[    7.776026] leds-pca953x 0-0062: gpios 16...31
[    7.790805] md: linear personality registered for level -1
[    7.804260] md: multipath personality registered for level -4
[    7.817425] md: raid0 personality registered for level 0
[    7.832130] md: raid1 personality registered for level 1
[    7.920147] raid6: sse2x1   gen()   302 MB/s
[    7.988151] raid6: sse2x1   xor()   855 MB/s
[    8.056199] raid6: sse2x2   gen()   703 MB/s
[    8.124136] raid6: sse2x2   xor()  1403 MB/s
[    8.192147] raid6: sse2x4   gen()  1191 MB/s
[    8.260138] raid6: sse2x4   xor()  1521 MB/s
[    8.263336] raid6: using algorithm sse2x4 gen() 1191 MB/s
[    8.266537] raid6: .... xor() 1521 MB/s, rmw enabled
[    8.269711] raid6: using ssse3x2 recovery algorithm
[    8.278727] xor: measuring software checksum speed
[    8.320126]    prefetch64-sse:  5422.000 MB/sec
[    8.360127]    generic_sse:  4926.000 MB/sec
[    8.363240] xor: using function: prefetch64-sse (5422.000 MB/sec)
[    8.372036] async_tx: api initialized (async)
[    8.408583] md: raid6 personality registered for level 6
[    8.412482] md: raid5 personality registered for level 5
[    8.415659] md: raid4 personality registered for level 4
[    8.437279] md: raid10 personality registered for level 10
[    8.544907] Btrfs loaded
[    8.623171] random: nonblocking pool is initialized
[    8.989847] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.367738] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   10.374655] systemd[1]: Detected architecture x86-64.
[   10.405383] systemd[1]: Set hostname to <ubuntu>.
[   12.462952] systemd[1]: Created slice User and Session Slice.
[   12.469717] systemd[1]: Listening on udev Control Socket.
[   12.476312] systemd[1]: Reached target User and Group Name Lookups.
[   12.483084] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   12.490175] systemd[1]: Listening on Journal Socket (/dev/log).
[   12.497593] systemd[1]: Listening on Journal Audit Socket.
[   12.505185] systemd[1]: Listening on LVM2 metadata daemon socket.
[   12.513244] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   12.522029] systemd[1]: Created slice System Slice.
[   12.529974] systemd[1]: Reached target Slices.
[   12.538811] systemd[1]: Created slice system-getty.slice.
[   12.546914] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   12.555244] systemd[1]: Listening on LVM2 poll daemon socket.
[   12.563880] systemd[1]: Listening on udev Kernel Socket.
[   12.572496] systemd[1]: Reached target Encrypted Volumes.
[   12.581108] systemd[1]: Listening on fsck to fsckd communication Socket.
[   12.589567] systemd[1]: Listening on Journal Socket.
[   12.608505] systemd[1]: Starting Nameserver information manager...
[   12.619527] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   12.630553] systemd[1]: Started Read required files in advance.
[   12.642367] systemd[1]: Mounting Debug File System...
[   12.653607] systemd[1]: Starting Uncomplicated firewall...
[   12.664378] systemd[1]: Mounting POSIX Message Queue File System...
[   12.675898] systemd[1]: Mounting Huge Pages File System...
[   12.904653] systemd[1]: Starting Load Kernel Modules...
[   12.915850] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   12.926052] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   13.075344] systemd[1]: Listening on Syslog Socket.
[   13.096721] systemd[1]: Starting Journal Service...
[   13.111869] systemd[1]: Mounted Debug File System.
[   13.121135] systemd[1]: Mounted POSIX Message Queue File System.
[   13.130426] systemd[1]: Mounted Huge Pages File System.
[   13.158598] systemd[1]: Started Uncomplicated firewall.
[   13.169367] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   13.202700] Loading iSCSI transport class v2.0-870.
[   13.312680] systemd[1]: Starting Create Static Device Nodes in /dev...
[   13.444627] systemd[1]: Started Nameserver information manager.
[   13.653029] iscsi: registered transport (tcp)
[   13.988692] systemd[1]: Started LVM2 metadata daemon.
[   14.199790] systemd[1]: Started Journal Service.
[   14.403406] iscsi: registered transport (iser)
[   16.292817] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   16.540350] systemd-journald[439]: Received request to flush runtime journal from PID 1
[   17.395465] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.515932] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[   17.515955] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20150930/utaddress-254)
[   17.515970] ACPI: This conflict may cause random problems and system instability
[   17.515976] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.515992] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GBAS) (20150930/utaddress-254)
[   17.516007] ACPI: This conflict may cause random problems and system instability
[   17.516012] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.516019] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GBAS) (20150930/utaddress-254)
[   17.516034] ACPI: This conflict may cause random problems and system instability
[   17.516039] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.344443] gpio_ich: GPIO from 451 to 511 on gpio_ich
[   18.881513] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC262: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   18.881524] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.881530] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.881535] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   18.881540] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   18.881545] snd_hda_codec_realtek hdaudioC0D2:      Mic=0x18
[   18.881551] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   18.893102] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   18.893437] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   18.893733] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   18.894028] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   20.806940] audit: type=1400 audit(1475249230.023:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=798 comm="apparmor_parser"
[   20.807552] audit: type=1400 audit(1475249230.023:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=797 comm="apparmor_parser"
[   20.812709] audit: type=1400 audit(1475249230.031:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lxd/lxd-bridge-proxy" pid=799 comm="apparmor_parser"
[   20.813786] audit: type=1400 audit(1475249230.031:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=796 comm="apparmor_parser"
[   20.813818] audit: type=1400 audit(1475249230.031:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=796 comm="apparmor_parser"
[   20.813842] audit: type=1400 audit(1475249230.031:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=796 comm="apparmor_parser"
[   20.813866] audit: type=1400 audit(1475249230.031:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=796 comm="apparmor_parser"
[   20.817103] audit: type=1400 audit(1475249230.035:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=801 comm="apparmor_parser"
[   20.817915] audit: type=1400 audit(1475249230.035:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=795 comm="apparmor_parser"
[   20.817941] audit: type=1400 audit(1475249230.035:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=795 comm="apparmor_parser"
[   20.853320] Adding 2050044k swap on /dev/sda5.  Priority:-1 extents:1 across:2050044k FS
[   21.577346] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   21.786920] cgroup: new mount options do not match the existing superblock, will be ignored
[   25.889725] e1000e: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   25.890084] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
mheubach commented 8 years ago

Found it :-)

[ 18.176678] gpio_ich: GPIO from 451 to 511 on gpio_ich

changed in n5550_board.c:

#define N5550_ICH_GPIO_BASE_DEFAULT 195 to #define N5550_ICH_GPIO_BASE_DEFAULT 451

Nice weekend and once again: thanks for this great piece of code! Manfred

ipilcher commented 8 years ago

On 09/30/2016 09:38 AM, mheubach wrote:

Found it :-)

|[ 18.176678] gpio_ich: GPIO from 451 to 511 on gpio_ich|

changed in n5550_board.c:

|#define N5550_ICH_GPIO_BASE_DEFAULT 195| to |#define N5550_ICH_GPIO_BASE_DEFAULT 451|

Nice weekend and once again: thanks for this great piece of code!

Glad you got it working. I've never been clear on how the gpio_ich chooses its numbers; I assume that it's somehow dependent on the exact kernel configuration, module load order, etc.

Note that gpio_ich does have a "gpiobase" parameter, so you might be able to use that to force it to 195.

Ian Pilcher arequipeno@gmail.com

-------- "I grew up before Mark Zuckerberg invented friendship" --------