search

irungentoo / Xiaomi_Yi_4k_Camera

Stuff for the xiaomi yi 4k (and 4k+) cameras.
265 stars 91 forks source link

How to increase volume of streaming to YouTube on Xiaomi Yi 4k ? #102

Open kiber-chaka opened 4 years ago

kiber-chaka commented 4 years ago

Hi! I stream to YouTube thru generated picture with parameters: {"ssid":"wifi-home","pwd":"wifi-pass","url":"rtmp://a.rtmp.youtube.com/live2/key","res":"1080p","rate":"3","dur":"0"} But volume is a lot highter on recorded video, so I suppose theoretically it is possible to increase volume for streaming. I tryed to look in volume settings during the stream and volume there was set to highest mode. So, may be I should to add some parameter into QR code? Thank you!

apsheronets commented 4 years ago

RTMP mod is what you need: http://psolyca.ovh/yi4k/yi.html By the way, it doesn't work on 4k+.

TijuanaKez commented 4 years ago

Hi thanks for the reply!

Yes I’ve investigated RTMP mod and thats great. But my touch screen is cracked so I use ‘In Housing Mode’ How can I create an autoexec.ash that will force the camera into streaming mode on boot?

Thanks,

Kez.

On 5 Jun 2020, at 2:21 pm, Alexander Markov notifications@github.com wrote:

RTMP mod is what you need: http://psolyca.ovh/yi4k/yi.html http://psolyca.ovh/yi4k/yi.html By the way, it doesn't work on 4k+.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/irungentoo/Xiaomi_Yi_4k_Camera/issues/102#issuecomment-639249264, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABAE6PJ4APD6JQES7ZRNRWLRVBXDVANCNFSM4MQ27CQA.

apsheronets commented 4 years ago

If only the wifi was enabled before your accident with the camera screen. Use the android application in this case.

TijuanaKez commented 4 years ago

Hi thanks again,

I remember I once had an used and auto exec.ash to dump the current settings to the SD card, then I could modify the settings and the camera would always start per those settings when it was turned on.

Do you know if this can be done to set the camera into ‘Live’ mode?

The mobile app can only produce the QR code, it cannot set the camera into ‘Live’ mode to look for the QR.

Thanks

On 5 Jun 2020, at 3:28 pm, Alexander Markov notifications@github.com wrote:

If only the wifi was enabled before your accident with the camera screen. Use the android application in this case.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/irungentoo/Xiaomi_Yi_4k_Camera/issues/102#issuecomment-639267581, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABAE6PIUFX2UBDULYS42RXTRVB67PANCNFSM4MQ27CQA.