Closed konkor closed 11 years ago
Sabayon/Gentoo $ sensors w83667hg-isa-0290 Adapter: ISA adapter Vcore: +0.93 V (min = +0.00 V, max = +1.74 V) in1: +1.72 V (min = +0.08 V, max = +1.06 V) ALARM AVCC: +3.33 V (min = +2.11 V, max = +1.02 V) ALARM +3.3V: +3.30 V (min = +0.00 V, max = +2.62 V) ALARM in4: +1.70 V (min = +0.00 V, max = +1.64 V) ALARM in5: +2.04 V (min = +1.02 V, max = +1.04 V) ALARM 3VSB: +3.39 V (min = +0.26 V, max = +0.06 V) ALARM Vbat: +3.31 V (min = +0.00 V, max = +2.62 V) ALARM fan1: 1171 RPM (min = 10546 RPM, div = 128) ALARM fan2: 1654 RPM (min = 2636 RPM, div = 16) ALARM fan3: 0 RPM (min = 5273 RPM, div = 128) ALARM fan4: 753 RPM (min = 10546 RPM, div = 128) ALARM fan5: 0 RPM (min = 1171 RPM, div = 128) ALARM temp1: +57.0°C (high = -95.0°C, hyst = +0.0°C) ALARM sensor = thermistor temp2: +52.5°C (high = +80.0°C, hyst = +75.0°C) sensor = diode temp3: +0.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor cpu0_vid: +1.950 V intrusion0: OK
$ ls /sys/class/hwmon/hwmon0/device/ cpu0_vid fan4_min in2_min in8_alarm pwm2_enable subsystem driver fan5_alarm in3_alarm in8_input pwm2_max_output temp1_alarm fan1_alarm fan5_div in3_input in8_max pwm2_mode temp1_input fan1_div fan5_input in3_max in8_min pwm2_start_output temp1_max fan1_input fan5_min in3_min intrusion0_alarm pwm2_step_output temp1_max_hyst fan1_min hwmon in4_alarm modalias pwm2_stop_output temp1_type fan2_alarm in0_alarm in4_input name pwm2_stop_time temp2_alarm fan2_div in0_input in4_max power pwm2_target temp2_input fan2_input in0_max in4_min pwm1 pwm2_tolerance temp2_max fan2_min in0_min in5_alarm pwm1_enable pwm3 temp2_max_hyst fan3_alarm in1_alarm in5_input pwm1_mode pwm3_enable temp2_type fan3_div in1_input in5_max pwm1_start_output pwm3_mode temp3_alarm fan3_input in1_max in5_min pwm1_stop_output pwm3_start_output temp3_input fan3_min in1_min in7_alarm pwm1_stop_time pwm3_stop_output temp3_max fan4_alarm in2_alarm in7_input pwm1_target pwm3_stop_time temp3_max_hyst fan4_div in2_input in7_max pwm1_tolerance pwm3_target temp3_type fan4_input in2_max in7_min pwm2 pwm3_tolerance uevent
Sabayon/Gentoo $ sensors w83667hg-isa-0290 Adapter: ISA adapter Vcore: +0.93 V (min = +0.00 V, max = +1.74 V) in1: +1.72 V (min = +0.08 V, max = +1.06 V) ALARM AVCC: +3.33 V (min = +2.11 V, max = +1.02 V) ALARM +3.3V: +3.30 V (min = +0.00 V, max = +2.62 V) ALARM in4: +1.70 V (min = +0.00 V, max = +1.64 V) ALARM in5: +2.04 V (min = +1.02 V, max = +1.04 V) ALARM 3VSB: +3.39 V (min = +0.26 V, max = +0.06 V) ALARM Vbat: +3.31 V (min = +0.00 V, max = +2.62 V) ALARM fan1: 1171 RPM (min = 10546 RPM, div = 128) ALARM fan2: 1654 RPM (min = 2636 RPM, div = 16) ALARM fan3: 0 RPM (min = 5273 RPM, div = 128) ALARM fan4: 753 RPM (min = 10546 RPM, div = 128) ALARM fan5: 0 RPM (min = 1171 RPM, div = 128) ALARM temp1: +57.0°C (high = -95.0°C, hyst = +0.0°C) ALARM sensor = thermistor temp2: +52.5°C (high = +80.0°C, hyst = +75.0°C) sensor = diode temp3: +0.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor cpu0_vid: +1.950 V intrusion0: OK
$ ls /sys/class/hwmon/hwmon0/device/ cpu0_vid fan4_min in2_min in8_alarm pwm2_enable subsystem driver fan5_alarm in3_alarm in8_input pwm2_max_output temp1_alarm fan1_alarm fan5_div in3_input in8_max pwm2_mode temp1_input fan1_div fan5_input in3_max in8_min pwm2_start_output temp1_max fan1_input fan5_min in3_min intrusion0_alarm pwm2_step_output temp1_max_hyst fan1_min hwmon in4_alarm modalias pwm2_stop_output temp1_type fan2_alarm in0_alarm in4_input name pwm2_stop_time temp2_alarm fan2_div in0_input in4_max power pwm2_target temp2_input fan2_input in0_max in4_min pwm1 pwm2_tolerance temp2_max fan2_min in0_min in5_alarm pwm1_enable pwm3 temp2_max_hyst fan3_alarm in1_alarm in5_input pwm1_mode pwm3_enable temp2_type fan3_div in1_input in5_max pwm1_start_output pwm3_mode temp3_alarm fan3_input in1_max in5_min pwm1_stop_output pwm3_start_output temp3_input fan3_min in1_min in7_alarm pwm1_stop_time pwm3_stop_output temp3_max fan4_alarm in2_alarm in7_input pwm1_target pwm3_stop_time temp3_max_hyst fan4_div in2_input in7_max pwm1_tolerance pwm3_target temp3_type fan4_input in2_max in7_min pwm2 pwm3_tolerance uevent