Loop - Githubissues

isaac879 / Pan-Tilt-Mount

A stepper motor driven, 3D printed and Arduino controlled pan/tilt mount.

MIT License

392 stars 101 forks source link

Loop #23

Closed Nikitore closed 2 years ago

Nikitore commented 2 years ago

I can't get it to work. I am sending the commands through the serial port of the Arduino Nano but the motors keep looping back and forth. Do you know why this is happening? I send a video where you can see the problem.

Nikitore commented 2 years ago

Video

https://drive.google.com/file/d/13yk88zgiTplqRZulqzlmxvYA5bjrUprQ/view?usp=drivesdk

jkowalk commented 2 years ago

Hi, A quick google search helped me find these tips:

Check if Speed is too high
Check wiring (you might need to swap two wires; check out this guide)
Correctly adjust the potentiometer of the motor driver (maybe this helps)

Hope it helps...

Nikitore commented 2 years ago

Thanks man! I'll check it out and let you know if it works.

Nikitore commented 2 years ago

Hi! @jkowalk I checked the wiring and that was it. It was connected wrong. Thanks for your help.