Mission Planner cannot connect at 115200 but only connects at 9600 hence slower communication

GoogleCodeExporter commented 8 years ago

Arducoper NG or ACM?
What steps will reproduce the problem?
Connecting the APM2 with my computer via USB cable to Mission Planner is no 
longer possible at 115200 baud rate.. It connects at 9600 though but the 
effects on the Map planner are lagging.. 
What is the expected output? What do you see instead?

What version of the product are you using? On what operating system?
"ArduCopter V2.7.1"
Mission Planner 1.2.11

Please provide any additional information below.

Original issue reported on code.google.com by naingfro...@gmail.com on 10 Sep 2012 at 6:15

GoogleCodeExporter commented 8 years ago

Not a problem on MP 1.2.31 and APM SW 2.9

Original comment by Benny.Si...@gmail.com on 19 Jan 2013 at 9:03

GoogleCodeExporter commented 8 years ago

Issue closed. 
If you find this is an error please report it in the new issues list
https://github.com/diydrones/ardupilot/issues?labels=ArduCopter&page=1&state=ope
n

Original comment by Benny.Si...@gmail.com on 19 Jan 2013 at 9:03

Changed state: Done

itsmejithu / arducopter

Mission Planner cannot connect at 115200 but only connects at 9600 hence slower communication #484