search

itub / hot-tub-controller

Raspberry Pi web enabled hot tub controller, supporting a heater, air and water temperature thermistors, and two pumps (with hardware schematic)
MIT License
24 stars 7 forks source link

Schematics and parts list #1

Open sailsunfurled opened 8 years ago

sailsunfurled commented 8 years ago

I am interested in using your project and modifying is slightly to use as a solar hot water controller.

I see where you mentioned a schematic and parts list in your readme. I do not see these files in the github.

Can you upload those? I did not want to re-create the wheel if you have that already, but I can draw them up if you need some help.

Thanks,

itub commented 8 years ago

I'll try to get to that soon -- you're correct, I haven't gotten around to uploading a schematic. It's on my list of things to get to...I do have it all built out and working on protoboards and am getting PCBs soon.

Dan

On Tue, Dec 29, 2015 at 2:50 PM, sailsunfurled notifications@github.com wrote:

I am interested in using your project and modifying is slightly to use as a solar hot water controller

I see where you mentioned a schematic and parts list in your readme I do not see these files in the github

Can you upload those? I did not want to re-create the wheel if you have that already, but I can draw them up if you need some help

Thanks,

— Reply to this email directly or view it on GitHub https://github.com/itub/hot-tub-controller/issues/1.

itub commented 8 years ago

I added two new files - try:

https://github.com/itub/hot-tub-controller/blob/master/iTubSchematic.png

and

https://github.com/itub/hot-tub-controller/blob/master/parts_list.txt

On Tue, Dec 29, 2015 at 3:05 PM, Dan Hardy hardydb@gmail.com wrote:

I'll try to get to that soon -- you're correct, I haven't gotten around to uploading a schematic. It's on my list of things to get to...I do have it all built out and working on protoboards and am getting PCBs soon.

Dan

On Tue, Dec 29, 2015 at 2:50 PM, sailsunfurled notifications@github.com wrote:

I am interested in using your project and modifying is slightly to use as a solar hot water controller

I see where you mentioned a schematic and parts list in your readme I do not see these files in the github

Can you upload those? I did not want to re-create the wheel if you have that already, but I can draw them up if you need some help

Thanks,

— Reply to this email directly or view it on GitHub https://github.com/itub/hot-tub-controller/issues/1.

sailsunfurled commented 8 years ago

Thanks!