search

itvietnam1024 / smart-alarm-clock

Automatically exported from code.google.com/p/smart-alarm-clock
0 stars 0 forks source link

Movement sensitivity too low. #28

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
Hi,

I have a standard HTC Hero, which (up until the last update) has been
showing a mostly solid bar in the History, but it did detect movement
correctly and wake me up.

Since the update (23/2) the History graph is now mostly empty with a few
tiny peaks, and the alarm did not go off until I picked the phone up to
find out what was going on!

Please can you provide a way to adjust the sensitivity (a slider in the
preferences, perhaps?).

Regards,

Stefan

Original issue reported on code.google.com by Stefanhc...@gmail.com on 25 Feb 2010 at 6:09

GoogleCodeExporter commented 9 years ago 
You are right, in last update sensitivity I made sensitivity too low

Original comment by a.kosenkov on 25 Feb 2010 at 7:59

GoogleCodeExporter commented 9 years ago 
Would it be worth adding a sensitivity setting or perhaps a sensitivity 
calibration
option? Some nights (before the 23rd Feb update) the graph shows a lot of 
movement
but its hard to picture whether it is me moving a lot or moving just a little.

Original comment by 0xSeanTa...@gmail.com on 28 Feb 2010 at 11:49

GoogleCodeExporter commented 9 years ago 
A calibration mode would be good so you could run it for a few minutes, move 
around
gently, try turning over a few times and see how much movement it produces.

Original comment by JonEdwin...@gmail.com on 1 Mar 2010 at 12:21

GoogleCodeExporter commented 9 years ago 
Using Nexus One with android 2.6.29 with smart alarm clock 48, also using widget
called Screen On to disable sleeping of the phone...

Simply put, when i after a nights sleeping check the histogram i see 1, max 2 
spikes
over the whole nightcourse...

thanks for great app though

Original comment by greystin...@gmail.com on 4 Mar 2010 at 3:49

GoogleCodeExporter commented 9 years ago 
On my Droid I got 0 movement last night and the alarm went off T-30 Min exactly.

Original comment by vetteody...@gmail.com on 5 Mar 2010 at 6:32

GoogleCodeExporter commented 9 years ago 
On my g1(ver 1.6) I get no movements I also have my screen on I have even tryed 
shaking
The phone sometimes I get 1 movement when I first start tracking but nothing 
else.

Original comment by melanie....@gmail.com on 6 Mar 2010 at 5:46

GoogleCodeExporter commented 9 years ago 
On my g1(ver 1.6) I get no movements I also have my screen on I have even tryed 
shaking
The phone sometimes I get 1 movement when I first start tracking but nothing 
else.

Original comment by melanie....@gmail.com on 6 Mar 2010 at 5:49

GoogleCodeExporter commented 9 years ago 
No movements on my g1(ver1.6) even with the screen on

Original comment by melanie....@gmail.com on 6 Mar 2010 at 5:52

GoogleCodeExporter commented 9 years ago 
I have a g1 (1.6) and last night only got 2 spikes, the rest of the graph was 
on the 
very bottom (deep sleep) but I remember waking up and turning over several 
times (more 
than 2).  It did correctly set off the alarm when I turned over 15 min before 
my alarm 
time though.

Original comment by howd...@gmail.com on 12 Mar 2010 at 3:31

GoogleCodeExporter commented 9 years ago 
Hello again. After several weeks of this not working I have had to disable Smart
Alarm Clock because it doesn't do much different from the normal alarm clock any
more. Is it possible to fix the sensitivity issue or just roll back to a 
previous
release? Seems a shame to lose the users you once had, but it's not really 
worth the
download if the accelerometer doesn't work.

Perhaps you could pester Android Market to add a 'rollback to previous release'
feature for these situations.

Original comment by badgercr...@gmail.com on 17 Mar 2010 at 1:26

GoogleCodeExporter commented 9 years ago 
Droid X - sensitivity too low.  I had to put it under my pillow to see any 
activity through the night...and then the battery overheated.

Original comment by pegbat...@gmail.com on 23 Oct 2010 at 2:39

GoogleCodeExporter commented 9 years ago 
LG Ally - was working pretty well (other than Issue 50, which I already noted) 
until the expiration issue at the New Year.  Since the update which fixed that 
bug, my phone doesn't record any movements whatsoever.  The log just shows a 
blank graph with the red and blue "alarm window" lines.  Have even deliberately 
moved the bed and phone around to get movement that should show up, and nothing 
does. :-(

Original comment by mzeb...@gmail.com on 9 Jan 2011 at 10:26

GoogleCodeExporter commented 9 years ago 
Installed the app just prior to the first of the year, and it worked as 
expected for three or four days, but then it started fource-closing, so I had 
to uninstall and reinstall it. After the reinstall it does not appear to have 
ever tracked movement... just sounds alarm at T-30 and has zero movement on the 
charts. I have my backlight set to stay on when plugged in - EVO 4G

Original comment by arm...@gmail.com on 15 Jan 2011 at 7:30