Controller And Chatpad Not Working

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Install chatpad_installer_amd64
2. Reboot
3. Run chatpad_control_amd64
4. Try using chatpad and controller
What is the expected output? What do you see instead?
Expected To Allow Use Of The Controller And Typing With Chatpad.
Controller Stops Working,Chatpad Not Typing,And The Chatpad Will Not Light Up.

What version of the product are you using? On what operating system?
Whatever One Was Out On 5/26/2011*.Windows 7 Home Premium 64-Bit.

Please provide any additional information below.
Command Prompt Does Not Stay Open.
Controller Ring Of Light Turns On For About 0.5 Seconds After Plugging It In To 
Laptop.

*Possibly 0.0.3?

Original issue reported on code.google.com by coromden...@gmail.com on 27 May 2011 at 1:02

[GoogleCodeExporter]

For 'Command Prompt Does Not Stay Open' I Meant 'Command Prompt Will Stay Open 
For
About 5 Seconds,Prints Some Text,Closes Instantly.It Closes So Soon After It 
Types
Text That I Can't Read It.

Original comment by coromden...@gmail.com on 27 May 2011 at 5:15

[GoogleCodeExporter]

You need to press F8 and disable Unsigned Driver check everytime your system 
boots. This worked for me.

Original comment by gopo.dre...@gmail.com on 1 Jul 2011 at 2:38

[GoogleCodeExporter]

I've Tried That.

Original comment by coromden...@gmail.com on 2 Jul 2011 at 1:40

[GoogleCodeExporter]

try going to start > programs > accessories > right click on 'command prompt' 
and select 'run as administrator'

Original comment by killaken...@gmail.com on 11 Jul 2011 at 6:07

[GoogleCodeExporter]

did that.

PS:F*CK MICROSOFT.I SPENT A GOOD $30 FOR THAT MESSENGER KIT TO ONLY FIND OUT
THAT IT DOES NOT WORK ON PC!

could we the xboxdrv (http://pingus.seul.org/~grumbel/xboxdrv/) driver for 
linux and mod it for windows?

Original comment by coromden...@gmail.com on 8 Aug 2011 at 8:32

[GoogleCodeExporter]

Heres what i did i was having the same problem and i solved it heres how. 1.I 
unplugged the controller 2.uninstalled all the chatpad drivers 3.plugged the 
controller in one of my pc's back usb ports 4.went to device manager and 
updated my normal controller drivers( if the controller updated the drivers 
automatically its best to check but you should be ok) 5.restart and do the f8 
driver check disable 6.install AMD64 chatpad drivers and wait for it to 
finish(if you get the pop ups asking about drivers click install anyway)7.once 
the drivers have installed restart the pc and do the f8 disable again 8. now 
unplug the controller and plug it right back into the same usb port 9.run the 
normal win7 amd64 test 3.exe and the command prompt should open and stay open 
10.once the command prompt finishes it will be open so press a couple buttons 
to see if they light up this works 100% of the time for me although it took me 
awhile to figure it out also im on win7 64bit too if it doesnt work retrace 
your steps because i just typed this entire message from my chatpad hope this 
helps good luck

Original comment by kenneth....@yahoo.com on 9 Aug 2011 at 5:21

[GoogleCodeExporter]

i am trying to use it on a laptop with no ports on the back.

Original comment by coromden...@gmail.com on 9 Aug 2011 at 5:29

[GoogleCodeExporter]

then try any port i its tricky sometimes but it just wouldnt work on the front 
of my desktop but if u run the test 3 and it closes try another port and run it 
again

Original comment by kenneth....@yahoo.com on 9 Aug 2011 at 6:37

[GoogleCodeExporter]

Just checking to see if you got it sorted out

Original comment by kenneth....@yahoo.com on 10 Aug 2011 at 2:38

[GoogleCodeExporter]

kenneth... where do you get normal win7 amd64 test 3.exe, as that did not come 
with my win7 64bit zip file

Original comment by RobertFr...@googlemail.com on 14 Aug 2011 at 8:39

[GoogleCodeExporter]

ive got it now kenn. cheers for those 1-10 steps, very very helpful. do you 
know how to keep the bscklight on constantly?

Original comment by RobertFr...@googlemail.com on 14 Aug 2011 at 9:04

[GoogleCodeExporter]

I never figured that one out it would definitely come in handy if someone got 
that working.Has there been any news on getting this working on wireless 
controllers yet?

Original comment by kenneth....@yahoo.com on 18 Aug 2011 at 9:24

[GoogleCodeExporter]

TUTORIAL WORKS 100%!!! A user called Kenneth did this. Found it in the issue 
section!

JUST BEFORE DOING THIS... DELETE ALL THE DRIVERS MANUALLY IN THE DEVICE 
MANAGER... RIGHTMOUSE (DELETE DRIVER -> UNINSTALL? YES in the checkbox)

I HAD THE SAME PROBS AS YOU AND NOW IT'S WORKING!!! 

KENNETH:
Heres what i did i was having the same problem and i solved it heres how. 1.I 
unplugged the controller 2.uninstalled all the chatpad drivers 3.plugged the 
controller in one of my pc's back usb ports 4.went to device manager and 
updated my normal controller drivers( if the controller updated the drivers 
automatically its best to check but you should be ok) 5.restart and do the f8 
driver check disable 6.install AMD64 chatpad drivers and wait for it to 
finish(if you get the pop ups asking about drivers click install anyway) 7.once 
the drivers have installed restart the pc and do the f8 disable again 8. now 
unplug the controller and plug it right back into the same usb port 9.run the 
normal win7 amd64 test 3.exe and the command prompt should open and stay open 
10.once the command prompt finishes it will be open so press a couple buttons 
to see if they light up this works 100% of the time for me although it took me 
awhile to figure it out also im on win7 64bit too if it doesnt work retrace 
your steps because i just typed this entire message from my chatpad hope this 
helps good luck

Original comment by rogelio1...@gmail.com on 11 Jan 2014 at 6:46