For a long time, the home panel on Octoscreen is unable to turn on/off the hot-end or the bed temperature. I just find out that is it due to the dashboard plug-in. When the dashboard plug-in is disable or removed, OctoScreen run flawlessly.
Version of OctoPrint
1.8.6
Platform
Raspberry Pi 3b with Octoscreen 2.7.4
Operating system running OctoPrint
OctoPi 0.17
Dashboard version
1.19.9
Python version
3.7.3
Printer model & used firmware incl. version
Prusa Mk3s, firmware 3.12.0
Browser and version of browser, operating system running browser
No response
Logs and other files needed for analysis
[X] Systeminfo Bundle (always include!) See here if you don't know where to find that.
[ ] Screenshots and/or videos showing the problem (always include in case of issues with the user interface)
[ ] GCODE file with which to reproduce (always include in case of issues with GCODE analysis or printing behaviour)
The problem
For a long time, the home panel on Octoscreen is unable to turn on/off the hot-end or the bed temperature. I just find out that is it due to the dashboard plug-in. When the dashboard plug-in is disable or removed, OctoScreen run flawlessly.
Version of OctoPrint
1.8.6
Platform
Raspberry Pi 3b with Octoscreen 2.7.4
Operating system running OctoPrint
OctoPi 0.17
Dashboard version
1.19.9
Python version
3.7.3
Printer model & used firmware incl. version
Prusa Mk3s, firmware 3.12.0
Browser and version of browser, operating system running browser
No response
Logs and other files needed for analysis
File uploads & additional information
octoprint-systeminfo-20230126154025.zip