Closed YouInSun closed 4 months ago
Hi,
I’m sorry, this means firmware is not stable in your tang, different tangs behave differently, still don’t know the reason why.
Until a fix is found, please try a version without mapper (01, 02, 03).
Enviado desde mi Alcatel OT511
El 19 feb 2024, a las 4:03, SunChip @.***> escribió:
Hello, I applied your solution with GoldStar FC-200 and the remained memory shows about 12Kbytes even the original machine gets 24Kbytes. Could you let me know any possibility shows the size? Note: I programmed the No. 5 option which has all options(bios sound and mapper)
Thank you for your reply in advance.
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.
Hi,
Thank you for your response however I've got a hint to restore remained memory.
When I connected 5v power to the Tang Nano's USB-c port, I've got increased memory. (about 28KBytes)
For your information! Regards.
However, If 4MB mapper is correct, my understanding is that the remained memory would not be 28KB...
Hi,
that’s correct. The thing is, Basic can only deal with 28815 bytes maximum, even with a 4 MB mapper. To check total memory, use a tool like testram in MSX-DOS:
Enviado desde mi Alcatel OT511
El 21 feb 2024, a las 16:09, SunChip @.***> escribió:
However, If 4MB mapper is correct, my understanding is that the remained memory would not be 28KB...
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.
Thank you for your explanation! I will check the tool if I have MSX-DOS.
Regards.
Hello, I applied your solution with GoldStar FC-200 and the remained memory shows about 12Kbytes even the original machine gets 24Kbytes. Could you let me know any possibility shows the size? Note: I programmed the No. 5 option which has all options(bios sound and mapper)
Thank you for your reply in advance.