Closed GoogleCodeExporter closed 8 years ago
Iso9600_Joliet problem solving.
Support debris simulation. (Maximum 8 pieces).
Original comment by yaya2007_7777@126.com
on 24 Mar 2014 at 2:04
map /proxmox.iso (0xff)
>>> error 28: selected item cannot fit into memory
Original comment by Steve6375
on 24 Mar 2014 at 2:39
Original comment by yaya2007_7777@126.com
on 25 Mar 2014 at 2:46
map /proxmox.iso (0xff)
>>> error 28: selected item cannot fit into memory
Original comment by Steve6375
on 25 Mar 2014 at 9:28
I loaded from the hard disk or CD-ROM, are successful.
Where did you load?
Original comment by yaya2007_7777@126.com
on 26 Mar 2014 at 1:16
USB flash drive
Original comment by Steve6375
on 26 Mar 2014 at 9:08
I loaded from the hard disk or CD-ROM or flash drive, are successful.
map /proxmox-ve_3.2-1933730b-2.iso (0xff)
map --hook
chainloader (0xff)
boot
Original comment by yaya2007_7777@126.com
on 27 Mar 2014 at 7:26
Original comment by yaya2007_7777@126.com
on 27 Mar 2014 at 7:27
hmmm...
If I run from a simple menu.lst then no problem and new grldr does work.
But I have an Easy2Boot USB flash drive.
If I replace grldr with this new version then I get the 'Error 28:' message on
all map commands once it displays the menu. If I use release version of 0.4.6a
then it works OK (except for Joliet issue).
So something else is wrong with this new version but I am not sure what.
Original comment by Steve6375
on 27 Mar 2014 at 9:23
From main menu, without running any menu entry, if I go into console
grub> map --status
floppies_orig=0, harddrives_orig=2, floppies_curr=0, harddrives_curr=2
Number of ATAPI CD-ROMs: 0
ram_drive=0x7F, rd_base=0x5BFD7000, rd_size=0xA000
Fr To Hm Sm To_C _H _S Start_Sector Sector_Count DHR
-- -- -- -- ---- -- -- ---------------- ---------------- ---
0D 00 00 C0 3447 44 53 F000F859022E0001 0000000000000000 F<F
0D 00 00 C0 3447 44 53 F000F859022E0001 0000000000000000 F<F
0D 00 00 C0 3447 44 53 F000F859022E0001 0000000000000000 F<F
0D 00 00 C0 3447 44 53 F000F859022E0001 0000000000000000 F<F
0D 00 00 C0 3447 44 53 F000F859022E0001 0000000000000000 F<F
0D 00 00 C0 3447 44 53 F000F859022E0001 0000000000000000 F<F
0D 00 00 C0 3447 44 53 F000F859022E0001 0000000000000000 F<F
0D 00 00 C0 3447 44 53 F000F859022E0001 0000000000000000 F<F
map --unmap=0
Error 28: Selected item cannot fit into memory
If I use release version of grldr it is OK:
grub> map --status
floppies_orig=0, harddrives_orig=2, floppies_curr=0, harddrives_curr=2
Number of ATAPI CD-ROMs: 0
ram_drive=0x7F, rd_base=0x5BFD7000, rd_size=0xA000
The int13 hook is off. The drive map table is currently empty.
map --unmap=0
(no error)
Original comment by Steve6375
on 27 Mar 2014 at 9:41
How do I reproduce the problem?
Original comment by yaya2007_7777@126.com
on 27 Mar 2014 at 11:44
Go to www.easy2boot.com
Download v1.31 E2B zip file (8MB)
Unzip to USB Flash drive (I used NTFS USB flash drive)
install grub4dos
boot from flash drive
When in menu - password = easy2boot to get to console
p
easy2boot
c
map --unmap=0
Error 28
Original comment by Steve6375
on 27 Mar 2014 at 11:49
Problem has been resolved
Original comment by yaya2007_7777@126.com
on 27 Mar 2014 at 1:35
Problem has been resolved
Original comment by yaya2007_7777@126.com
on 27 Mar 2014 at 1:35
Attachments:
Nice! :-)
Original comment by Steve6375
on 27 Mar 2014 at 1:38
Just a question really
If I map the proxmox ISO, I can see in the root a EULA file.
both
ls /EULA
and
ls /eula
work.
Is this expected behaviour? What if there were two files one Eula and one EULA
?
Under some circumstances grub4dos is case sensitive because some WinPE ISOs
won't boot using chainloader /bootmgr but they will boot using chainloader
/BOOTMGR.
see http://reboot.pro/topic/19673-multiboot-usb-w-basic-pe-image/
Not sure if this is a problem, I just don't understand why chainloader /bootmgr
doesn't work on some ISOs???
Original comment by Steve6375
on 2 Apr 2014 at 8:24
There is a strange problem with this version. 2104-03-27 0.4.6a
See http://reboot.pro/topic/19683-boot-bitdefender-rescue-iso-from-usb-mystery/
Make an NTFS USB Flash drive
Download bitdefender rescue cd.iso (see posts)
make a simple menu
debug 1
partnew (hd0,3) 0 /bitdefender-rescue-cd.iso
map /bitdefender-rescue-cd.iso (0xff)
map --hook
chainloader (0xff)
>>> squashfs error
However, do same thing on a FAT32 drive and it boots OK.
With Jan 2104 0.4.5c then it works on both FAT32 and NTFS.
Original comment by Steve6375
on 3 Apr 2014 at 3:29
dsl-4.11.rc2.iso has same issue with this version 03-27 (works OK on 0.4.5c)
Original comment by Steve6375
on 4 Apr 2014 at 12:01
P.S. I was mistaken about FAT32 - issue also occurs on FAT32 drives
Original comment by Steve6375
on 4 Apr 2014 at 12:05
Please try
Original comment by yaya2007_7777@126.com
on 4 Apr 2014 at 7:04
Same problem
Bitdefender won't boot fully with this new version, but does boot on 0.4.5c
2014-1-17 version
Original comment by Steve6375
on 4 Apr 2014 at 9:58
Looks good :-)
I will continue to test.
Well done.
Thanks
Steve
Original comment by Steve6375
on 18 Apr 2014 at 8:25
please close - 2014-11-10 is OK too.
Original comment by Steve6375
on 10 Nov 2014 at 1:44
下载
0.4.6a_2014-11-11,测试没有问题。<br/>他在什么环境,用什么方�
�� map ?<br/>我这里没法访问
google,可以的话,把原贴转贴到无忧。
At 2014-11-10 21:44:58, grub4dos-chenall@googlecode.com wrote:
Original comment by yaya2007_7777@126.com
on 12 Nov 2014 at 2:38
Original comment by chenall.cn
on 12 Nov 2014 at 5:39
Original issue reported on code.google.com by
Steve6375
on 20 Mar 2014 at 6:57