The lastest nigtly build don´t call to anoyher sip users with 2.3 SIP integration.

[GoogleCodeExporter]

What steps will reproduce the problem?
1.I try to call to username@sip.provider.com
2.It don't try to call

What is the expected output? What do you see instead?

In the stable release i could do it, i only have to add de 
user@sip.provider.com to the contact on "internet call"

What version of the product are you using? On what operating system?

the lastest nightly buil (2012/07/02)

Original issue reported on code.google.com by yed...@gmail.com on 2 Jul 2012 at 10:49

[GoogleCodeExporter]

Can you collect logs (see HowToCollectLogs wiki page).

Also when you say that it doesn't try to call, does it remain on the in call 
screen with gray background? Or does it even don't leave the dialer screen?

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 10:58

• Changed state: Need-Details

[GoogleCodeExporter]

sorry but my english isn't very good. I have reset my telephone, so i have to 
do the call again.

I was using the dialer of the system, select yhe contact then his sip adress 
abd it donn´t launch the call. 

With the csipsimple dialer i don´t found the sip adress only the telephone. 
¿how i have to do to call to user@sip.provider.com? 

The problem is that the call is not launched.

Original comment by yed...@gmail.com on 2 Jul 2012 at 11:25

[GoogleCodeExporter]

You can go in "text dialer mode" depending on the device you are using the 
little "txt" icon will appear in the bottom bar or in menu (by pressing menu 
key).
Then, when you are in text dialing mode, you can enter the 
"user@sip.provider.com" sip uri.

The fact that it doesn't integrate to dialer seems to be something different. 
I'll do an extra check on this point. Is the sip address of the contact entered 
in the "internet call" field or in the "Im field" with custom protocol set to 
"sip". Normally the app should support both way (because the first one is only 
available on android 2.3 and upper).

Don't worry for your english. It's not my native tongue too ;) I'm from france 
;).

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 11:29

[GoogleCodeExporter]

I had to to study more french when i live in BXL, jejej I'm spanish.

I have android 2.3 and only know the field "internet call", I will try the 
diferet options. Merci 

Original comment by yed...@gmail.com on 2 Jul 2012 at 11:36

[GoogleCodeExporter]

from history of incoming call i can call

Original comment by yed...@gmail.com on 2 Jul 2012 at 11:36

[GoogleCodeExporter]

I txt mode i can call, but from field "internet call" i can´t, i will try to 
restore the original firmware, i don´t undertand what are happening. But now i 
think that the problem can be my telephone, not csipsimple 

Original comment by yed...@gmail.com on 2 Jul 2012 at 11:43

[GoogleCodeExporter]

Ok, just did a test, there is indeed something wrong. When I try to call using 
the "internet call" field it strip all non numbers char :S... 
In your case I guess that there is no numbers at all and so nothing happens 
(since the app drops empty numbers).
Something to be fixed :) The app should not consider the incoming uri as a tel 
number but as a text.

Thanks a lot for the feedback. I'll fix that as soon as possible.

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 11:49

• Changed title: The lastest nigtly build don´t call to anoyher sip users with 2.3 SIP integration.
• Changed state: Accepted

[GoogleCodeExporter]

Apparently not your phone, but something in csipsimple :). I'll keep you in 
touch on the progress to fix that. Thanks !

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 11:50

[GoogleCodeExporter]

This issue was closed by revision r1667.

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 12:00

• Changed state: Fixed

[GoogleCodeExporter]

I launched a manual nightly build process so that you can test this if you 
want. It will be produced in about 30 minutes normally.

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 12:05

[GoogleCodeExporter]

Thank you very much you are my root. :-)

Original comment by yed...@gmail.com on 2 Jul 2012 at 12:08

[GoogleCodeExporter]

I have instaled the new build and the error persist

Original comment by yed...@gmail.com on 2 Jul 2012 at 12:47

[GoogleCodeExporter]

Issue 1808 has been merged into this issue.

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 12:58

[GoogleCodeExporter]

Ok, some question, when you make the call using the "internet call" entry, do 
you see first one popup asking to choose between csipsimple and the stock SIP 
application?

If not, there is maybe some previous choice that were made on the stock sip 
application and so it tries to use the stock sip app (that is maybe not 
configured).

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 12:59

• Changed state: Accepted

[GoogleCodeExporter]

No it not appear

Original comment by yed...@gmail.com on 2 Jul 2012 at 1:13

[GoogleCodeExporter]

For it is important for you, i install csipsimple from the market and it call 
without problem but for the rear speeker. The nightly build sound for the 
correct speaker but don´t launch the calls to any sip adress

Original comment by yed...@gmail.com on 2 Jul 2012 at 1:16

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Another thing in my telephone samsung have deleted the native sip support. Now 
i don´t have this native support.

But i tried to add it, and i could call by the native sip (with a poor quality) 
but not by csimple, so i format my telephone and put the custom rom again. I 
not flash the telephone with the original rom, because i think that it is not 
the problem, because de csipsimple of the market works well.

Original comment by yed...@gmail.com on 2 Jul 2012 at 1:26

[GoogleCodeExporter]

Ok, weird that it doesn't prompt, maybe the stock SIP application is not 
provided by your phone manufacturer, so no choice is requested.
Can you try to collect logs :
Press menu while in csipsimple dialer, choose help and "start recording 
logs...."
Then reproduce the problem
Finally go back in dialer, menu, help and "stop and send logs..." it will 
produce an email with some logs where there is maybe some interesting clue :). 
The email address it's generated for should be fine and raise me directly. 

Thanks

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 1:26

[GoogleCodeExporter]

I don`t have native support for sip, but i installled before and it didn´t 
work. Try i again to install the native support?

Original comment by yed...@gmail.com on 2 Jul 2012 at 1:29

[GoogleCodeExporter]

or log without it??

Original comment by yed...@gmail.com on 2 Jul 2012 at 1:30

[GoogleCodeExporter]

with sip native support, it call but it spent a long time to hangs off. Thank 
you with native sip support it works. Althoutgh i think that not every pepeople 
know how to install de native sip support.

Original comment by yed...@gmail.com on 2 Jul 2012 at 1:57

[GoogleCodeExporter]

The time to hang off it is normal when you hang off afer pick up the telephone.

Original comment by yed...@gmail.com on 2 Jul 2012 at 2:00

[GoogleCodeExporter]

I received the logs thanks.
Well, that's weird the system seems to send the intent with action "VIEW". I 
only register to action "CALL". Since I thought all contact app would try to 
send action call while trying to call a sip uri.

I think that indeed the market version has also the registration on view intent 
for tablets (because they only sent view, but I found meanwhile a better way). 
I guess that I have to re-introduce the registration on "VIEW" action. Even if 
sounds weird, it will probably solve the problem. Anyway I wonder what could be 
a 'VIEW' of a sip uri, so not so weird to call it when such an action is 
requested.

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 2:01

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I don´t understand all what you say, i need to do a couser for programers. But 
i think that i undertood the principal idea. You have to change the code (the 
view sentence) because this command don´t accept a sip adress.

I you can do it, send me the version what do it, because althougt now my 
problem it is solved i prefer the other way (I don´t like make changes in my 
system with root privileges because many times i don´t know what i am doing)

Again thank you very much, for the solution anf for remembering me that i have 
tu study french, english and informatic lol ;)

Original comment by yed...@gmail.com on 2 Jul 2012 at 2:13

[GoogleCodeExporter]

This issue was closed by revision r1670.

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 3:00

• Changed state: Fixed

[GoogleCodeExporter]

Yes, sorry I was a little bit too technical on the last comment :). 

I pushed a fix on the source code for that. It will be produced in tonight 
nightly build. I don't launch a manual one this time because I've other things 
to fix before. So it will be available tomorrow for test. Let me know how it 
goes.

Thanks for the report and the test and log collect you already did, it's very 
valuable for me to have this feedback, it makes the app better and helps to 
improve nightly build so that it will not break everything when landing on the 
android market :)

Original comment by r3gis...@gmail.com on 2 Jul 2012 at 3:03

[GoogleCodeExporter]

I hope this version impatient, thank you again. It's a pleasure to help in any 
way I can.

Original comment by yed...@gmail.com on 2 Jul 2012 at 3:13

[GoogleCodeExporter]

Now csip launches the calls well even without native sip support. WELL DONE!

Original comment by yed...@gmail.com on 3 Jul 2012 at 1:10

[GoogleCodeExporter]

Great :)

Thanks for the test and the feedback

Original comment by r3gis...@gmail.com on 3 Jul 2012 at 8:34