jackbrown1993
commented
10 months ago @HyperActiveJ any ideas on this one before I start debugging? After some time i still read messages from the hot tub but sending messages doesn't seem to work until I restart the container.
2023-11-02 15:16:31,953:INFO:Set Temp is 28.0 and Water Temp is 27.5 2023-11-02 15:18:31,101:INFO:Requesting module ID. 2023-11-02 15:18:31,101:INFO:Queueing Message: 7e050abf04777e 2023-11-02 15:18:32,102:INFO:Set Temp is 28.0 and Water Temp is 27.5 2023-11-02 15:19:56,447:INFO:MQTT message received on topic: homie/hot_tub/jacuzzi/set_temperature/set with value: 20 2023-11-02 15:19:56,448:INFO:Queueing Message: 7e060abf2028ca7e 2023-11-02 15:20:31,256:INFO:Requesting module ID. 2023-11-02 15:20:31,256:INFO:Queueing Message: 7e050abf04777e 2023-11-02 15:20:32,257:INFO:Set Temp is 28.0 and Water Temp is 27.5 2023-11-02 15:22:31,402:INFO:Requesting module ID. 2023-11-02 15:22:31,403:INFO:Queueing Message: 7e050abf04777e 2023-11-02 15:22:32,404:INFO:Set Temp is 28.0 and Water Temp is 27.5 2023-11-02 15:24:31,556:INFO:Requesting module ID. 2023-11-02 15:24:31,556:INFO:Queueing Message: 7e050abf04777e 2023-11-02 15:24:32,557:INFO:Set Temp is 28.0 and Water Temp is 27.5 2023-11-02 15:26:31,704:INFO:Requesting module ID. 2023-11-02 15:26:31,704:INFO:Queueing Message: 7e050abf04777e 2023-11-02 15:26:32,706:INFO:Set Temp is 28.0 and Water Temp is 27.5 2023-11-02 15:28:31,857:INFO:Requesting module ID. 2023-11-02 15:28:31,857:INFO:Queueing Message: 7e050abf04777e 2023-11-02 15:28:32,859:INFO:Set Temp is 28.0 and Water Temp is 27.5 2023-11-02 15:30:32,017:INFO:Requesting module ID. 2023-11-02 15:30:32,017:INFO:Queueing Message: 7e050abf04777e 2023-11-02 15:30:33,019:INFO:Set Temp is 28.0 and Water Temp is 27.5 2023-11-02 15:32:32,185:INFO:Requesting module ID. 2023-11-02 15:32:32,185:INFO:Queueing Message: 7e050abf04777e 2023-11-02 15:32:33,187:INFO:Set Temp is 28.0 and Water Temp is 27.5 2023-11-02 15:34:32,321:INFO:Requesting module ID. 2023-11-02 15:34:32,321:INFO:Queueing Message: 7e050abf04777e 2023-11-02 15:34:33,323:INFO:Set Temp is 28.0 and Water Temp is 27.5 2023-11-02 15:36:12,468:INFO:Connected to MQTT. 2023-11-02 15:36:12,471:INFO:Attempting to connect to Jacuzzi (10.100.10.216:4257)... 2023-11-02 15:36:12,556:INFO:MQTT message received on topic: homie/hot_tub/jacuzzi/set_temperature/set with value: 20 2023-11-02 15:36:12,557:ERROR:Attempted to send a message without a channel set. 2023-11-02 15:36:17,473:INFO:Active Channels: [18] 2023-11-02 15:36:17,474:INFO:Discovered Channels: [16] 2023-11-02 15:36:17,474:INFO:Discovered Channels: [16, 17] 2023-11-02 15:36:17,474:INFO:Discovered Channels: [16, 17, 18] 2023-11-02 15:36:17,476:INFO:Channel Assigned: 16 2023-11-02 15:36:17,492:INFO:Set Temp is 28.0 and Water Temp is 28.0 2023-11-02 15:36:25,304:INFO:MQTT message received on topic: homie/hot_tub/jacuzzi/set_temperature/set with value: 20 2023-11-02 15:36:25,305:INFO:Queueing Message: 7e060abf2028ca7e 2023-11-02 15:36:25,501:INFO:Set Temp is 28.0 and Water Temp is 28.0 2023-11-02 15:36:25,542:INFO:Sending message: 7e060abf2028ca7e 2023-11-02 15:36:26,502:INFO:Set Temp is 20.0 and Water Temp is 28.0 2023-11-02 15:36:29,506:INFO:Set Temp is 20.0 and Water Temp is 28.0 2023-11-02 15:36:31,510:INFO:Set Temp is 20.0 and Water Temp is 28.0 2023-11-02 15:36:36,517:INFO:Set Temp is 20.0 and Water Temp is 28.0 2023-11-02 15:36:38,520:INFO:Set Temp is 20.0 and Water Temp is 28.0 2023-11-02 15:36:55,543:INFO:Set Temp is 20.0 and Water Temp is 28.0