jacqswu / simple-openni

Automatically exported from code.google.com/p/simple-openni
0 stars 0 forks source link

Skeleton Tracking with SimpleOpenNI #76

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
What steps will reproduce the problem?
1.Installing appropriate libraries and software
2.Running code that includes skeleton tracking

What is the expected output? What do you see instead?
I am expecting depth images with skeleton tracking.
I see the following error: Cannot find anything named 
"SimpleOpenNI.SKEL_PROFILE_ALL"

What version of the product are you using? On what operating system?
Windows 7
Processing 2.0
SimpleOpenNi 1.96
OpenNI 2.2.0.30 (installed both 32 and 64 bit versions)
NITE 2.2.0.10 (installed both 32 and 64 bit versions)
Kinect SDK 1.7

Please provide any additional information below.
I am able to draw depth images fine, but I am not able to do skeleton tracking. 
Is there something I am missing?

Original issue reported on code.google.com by christop...@gmail.com on 22 Sep 2013 at 9:57

GoogleCodeExporter commented 8 years ago
i have the same problem i couldn't fix it yet !! anything came up with u ??  

Original comment by swhassa...@gmail.com on 25 Sep 2013 at 12:30

GoogleCodeExporter commented 8 years ago
Nope. What operating system are you using? and version of OpenNI?

Original comment by christop...@gmail.com on 26 Sep 2013 at 4:39

GoogleCodeExporter commented 8 years ago
Hi,
"SimpleOpenNI.SKEL_PROFILE_ALL" was working on the precedent version of 
SimpleOpenNi but doesn't work with the new one (1.96)
You just have to delete  "SimpleOpenNI.SKEL_PROFILE_ALL". 
So you will have something like this 

kinect3D.enableUser();

Original comment by garcinsa...@gmail.com on 27 Sep 2013 at 8:41

GoogleCodeExporter commented 8 years ago
Yes. I have also discovered that SimpleOpenNI and OpenNI have new versions, 
released fairly recently, which are not completely compatible with old code. 
Therefore, the list I have above is all the software you need to be able to do 
skeleton tracking. To find example code go to 
Processing/libraries/SimpleOpenNI/examples/OpenNi/User3d on your machine.

Original comment by christop...@gmail.com on 27 Sep 2013 at 3:03

GoogleCodeExporter commented 8 years ago
when i run user3d it says cannot run the sketch. Does anyone have the previous  
version of the simpleopenni library ??

Original comment by swhassa...@gmail.com on 29 Sep 2013 at 6:05

GoogleCodeExporter commented 8 years ago
okay fixed it :) thanks guys but if u have the old version of the library 
please let me know 

Original comment by swhassa...@gmail.com on 29 Sep 2013 at 10:44

GoogleCodeExporter commented 8 years ago
COMO ARREGLO ESE PROBLEMA , AYUDA! 

Original comment by diegovil...@gmail.com on 29 Oct 2013 at 6:07

GoogleCodeExporter commented 8 years ago
How do you fix it?

Original comment by ben.chre...@gmail.com on 8 Nov 2013 at 11:02

GoogleCodeExporter commented 8 years ago
You either need an old version of the appropriate libraries or you need to 
modify/use new code. I suggest using the example code:
To find example code go to 
Processing/libraries/SimpleOpenNI/examples/OpenNi/User3d on your machine.

Original comment by christop...@gmail.com on 9 Nov 2013 at 6:31

GoogleCodeExporter commented 8 years ago
Hello,

In the new version of the simpleopenNI there is an example (user3d) it is a
skeleton tracking software and what ever the old code you are trying to run
is doing try to do it in the new one in the same way it is done in the old
one but with the commands that are identified in the new version.

Good Luck

Original comment by swhassa...@gmail.com on 13 Nov 2013 at 7:19

GoogleCodeExporter commented 8 years ago
Please tell me the exact solution to this problem. 
I am reading the book Making things See and I found the code on page 191. I 
understand that I am copying it without understanding, but I dont know how to 
rectify the error. I am using Windows 7, 64 bit PC.
Also I am using Processing 2.0.3 
SimpleOpenNI version 1.96
The folder size for 1.96 is some 300 Mb where as that for 0.27 version is 14 
Mb. I think there is a glitch here somewhere. Please help out

Original comment by jaskaran...@gmail.com on 17 Mar 2014 at 10:46

GoogleCodeExporter commented 8 years ago
enableUser() now defaults to SKEL_PROFILE_ALL
So instead of   context.enableUser(SimpleOpenNI.SKEL_PROFILE_ALL);
You need to just put context.enableUser();

I'm still however getting the error -> context.startPoseDetection does not 
exists
If anyone knows what this has changed to I'd be grateful to hear it.

Original comment by amj...@gmail.com on 18 Mar 2014 at 9:22

GoogleCodeExporter commented 8 years ago
i am running a code on book "making things see" on page 191 the following error 
message "cannot find anything named (SimpleOpenNI.SKEL_PROFILE_ALL)"

if any body have solution then tell me

thanks

Original comment by mobiley...@gmail.com on 2 Apr 2014 at 9:12

GoogleCodeExporter commented 8 years ago
As stated previously, that book contains code that is compatible with only the 
old versions of SimpleOpenNI and OpenNI. This means that you cannot copy paste 
the code and have it work. Instead you must write new code using the provided 
examples as a guide. You can find the example code 
Processing/libraries/SimpleOpenNI/examples/OpenNi/User3d on your machine. The 
software I have listed in the first post is all that you need.

Original comment by christop...@gmail.com on 6 Apr 2014 at 4:25

GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
This code should for tracking hand with the new version of SimpleOpenNI.

Original comment by achalkii...@gmail.com on 6 Jun 2014 at 8:02

Attachments:

GoogleCodeExporter commented 8 years ago
i have the same problem, i see I see the following error: Cannot find anything 
named "SimpleOpenNI.SKEL_PROFILE_ALL"
i am using 
Windows 7
Processing 2.0
SimpleOpenNi 1.96
OpenNI 1.5.4.0
NITE 1.5.2.21 
Kinect SDK 1.7

please help me about this 

thanks

Original comment by yudistir...@gmail.com on 6 Aug 2014 at 3:04

GoogleCodeExporter commented 8 years ago
#7

TENGO EL MISMO PROBLEMA PERO NO LOGRO RESOLVERLO

Original comment by Banderos...@gmail.com on 26 Dec 2014 at 4:58

GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
Hi people! Im using this book "Making things see" but im not able to run 
programs on skeleton tracking.I was told to use User 3d example as guide fine 
 but what should i do if i want to use the codes in the book.Which version of openni is useful 1.96 or 0.27 

Original comment by adithyam...@gmail.com on 19 Aug 2015 at 9:26