X-Loader 1.41... Starting on with MMC and stuck ...

[GoogleCodeExporter]

Hi All,

I do get 

Texas Instruments X-Loader
Starting on with MMC ..

and thats all the board get stuck. I erased the flash earlier.

I tried from even MMC using the instructions but it seems its not helping.

Please help, i need to bring up a demo.

Thanks,

-Ravi

Original issue reported on code.google.com by ravilakk...@gmail.com on 25 Nov 2008 at 3:05

[GoogleCodeExporter]

And also iam using all pre-built images

Original comment by ravilakk...@gmail.com on 25 Nov 2008 at 7:06

[GoogleCodeExporter]

Have you tried powering up the board with the USER button held in?

Original comment by bea...@gmail.com on 17 Dec 2008 at 6:23

[GoogleCodeExporter]

ya . tried powering up board with User button On.
Did all USB/SD card bootup with all instruction give in wiki.

Original comment by ravilakk...@gmail.com on 18 Dec 2008 at 2:34

[GoogleCodeExporter]

General: Better ask questions like this at mailing list or IRC, you will get 
faster
answer there:

http://beagleboard.org/discuss

Regarding the issue: Please try

a) to reformat your MMC card and then put MLO, U-Boot and uImage (in this 
order) on
the freshly formated card

b) try an other MMC card

Original comment by dirk.be...@gmail.com on 22 Dec 2008 at 6:10

• Changed state: Started
• Added labels: Type-Task, Priority-Low
• Removed labels: Type-Defect, Priority-Medium

[GoogleCodeExporter]

Please look at http://eLinux.org/BeagleBoardRecovery.

Original comment by jdk%ieee...@gtempaccount.com on 15 Mar 2009 at 4:23

• Changed state: Invalid

[GoogleCodeExporter]

I am facing the same problem.... 

Original comment by risa...@gmail.com on 30 Jun 2009 at 6:28