search

jakkra / ZSWatch-HW

The hardware repo for ZSWatch
GNU General Public License v3.0
131 stars 31 forks source link

PCBWay Assembly Can't Locate Pomagtor (RD90_LZH0230529-004_DJ-5PIN_PH2_54) & EastRising(ER-CON0.4-24P) #2

Closed xorb22 closed 1 year ago

xorb22 commented 1 year ago

I tried ordering the HW PCB and assembly through PCBWay, but upon review by PCBWay, they could not locate the following components.

33 | X1 | 1 | Pomagtor | RD90_LZH0230529-004_DJ-5PIN_PH2_54 | DOCK | Pomagtor:RD90_LZH0230529-004_DJ-5PIN_PH2_54 | THT | We can find this part number. Please confirm the correct part number.

34 | X8 | 1 | EastRising | ER-CON0.4-24P | OK-24F024-04 | EastRising:ER-CON0.4-24P | SMD | We can find this part number. Please confirm the correct part number.

How can i overcome this?

Thanks

jakkra commented 1 year ago

Hi, the first one is a Do not mount, so they should not source it. It's a custom connector I have gotten manufactured. The BOM.xls is updated to more clearly state this.

Second one OK-24F024-04 is the correct number and this should be used for sourcing, and they have successfully sourced this part two times for me. Updated the BOM.xls to make it clearer this is the part number.

Fixed in main now https://github.com/jakkra/ZSWatch-HW/commit/0e061375c47cf4ed94781e597d2eb1aed2d0d848

xorb22 commented 1 year ago

For the custom Pomagtor connector, how can I get it done and assembled on the pcb? Do you instruction for those?

Thanks

jakkra commented 1 year ago

For the custom Pomagtor connector, how can I get it done and assembled on the pcb? Do you instruction for those?

Thanks

You need to buy a low profile standard 1.54 mm female pin header and solder on yourself.

xorb22 commented 1 year ago

Thanks. Any chance you could share which component you used? From where? Thanks

jakkra commented 1 year ago

Thanks. Any chance you could share which component you used? From where? Thanks

There is not documentation yet for this, you are a bit early, have not had time to write it all. So note this project is not for beginners, at least not right now.

This is the pin header I have used before, it's about 3.6mm heigh. I don't remember where I bought it however and could not find where I bought it. So you will need to search around a bit.

IMG20231028085222

Depending on whwre you live, I may be able to ship one Pomogtor dock connector + cable, but you need to conect me on discord then: jakkra