search

jakplugg / Typhoon

Clouds variant
29 stars 9 forks source link

Typhoon & CV patching #8

Open TotalRefusal opened 4 years ago

TotalRefusal commented 4 years ago

Hi there! I noticed a strange behavoir when patching CV into Typhoon. All 4 slider led´s are flashing up in the moment when I plug the jack in. Is that normal (because of the AUX input feature) or did I miss something?? Cheers

TotalRefusal commented 4 years ago

... this is the case with all CV inputs except V/Oct, Freeze and both VCA inputs

TotalRefusal commented 4 years ago

Yeah, it is that AUX CV feature connected to the switches of the CV input jacks. Took a look @schematics. This clicks are also clearly audible of course, if patching cables are "hot"

Is there a workaround for that???

jakplugg commented 4 years ago

Maybe the aux op amp or surrounding circuit is picking up the noise. It was unaltered from the microcell (not sure if that was directly copied from supercell) I will take a look at it.

On 2/24/20, TotalRefusal notifications@github.com wrote:

Yeah, it is that AUX CV feature connected to the switches of the CV input jacks. Took a look @schematics. This clicks are also clearly audible of course, if patching cables are "hot"

Is there a workaround for that???

-- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/jakplugg/Typhoon/issues/8#issuecomment-590280565

TotalRefusal commented 4 years ago

It´s a mechanical thing when plugging in the patching cable, I think. Happens only, when patching from a CV source into Typhoon. So when you plug in, you´are touching AUX CV bus for a fraction of a second, I suppose....

TotalRefusal commented 4 years ago

Only solution I can see is patching from Typhoon to CV source and not vice versa. Or kick out that AUX CV bus feature... which makes no sense to me anyway :)