After Upgrading HA, addon stopped working

mkomarac commented 3 years ago

I have noticed that after upgrading Home assistant, this addon stopped working. RTL_433 Protocol = 16 Registering protocol [1] "AlectoV1 Weather Sensor (Alecto WS3500 WS4500 Ventus W155/W044 Oregon)" Registered 1 out of 101 device decoding protocols Found 1 device(s) trying device 0: F, ��, SN: �?� usb_open error -1 Failed to open rtlsdr device #0. Unable to open a device [cmd] /bin/ash exited 0 [cont-finish.d] executing container finish scripts... [cont-finish.d] done. [s6-finish] waiting for services. [s6-finish] sending all processes the TERM signal.

I have look at hardware info and found that my USB dongle is not at port 0

name: 1-4 sysfs: '/sys/devices/pci0000:00/0000:00:15.0/usb1/1-4' dev_path: /dev/bus/usb/001/002 subsystem: usb by_id: null attributes: BUSNUM: '001' DEVNAME: /dev/bus/usb/001/002 DEVNUM: '002' DEVPATH: '/devices/pci0000:00/0000:00:15.0/usb1/1-4' DEVTYPE: usb_device DRIVER: usb ID_BUS: usb ID_FOR_SEAT: usb-pci-0000_00_15_0-usb-0_4 ID_MODEL: RTL2838UHIDIR ID_MODEL_ENC: RTL2838UHIDIR ID_MODEL_ID: '2838' ID_PATH: 'pci-0000:00:15.0-usb-0:4' ID_PATH_TAG: pci-0000_00_15_0-usb-0_4 ID_REVISION: '0100' ID_SERIAL: Realtek_RTL2838UHIDIR_00000001 ID_SERIAL_SHORT: '00000001' ID_USB_INTERFACES: ':ffffff:' ID_VENDOR: Realtek ID_VENDOR_ENC: Realtek ID_VENDOR_ID: 0bda MAJOR: '189' MINOR: '1' PRODUCT: bda/2838/100 SUBSYSTEM: usb TAGS: ':seat:' TYPE: 0/0/0 USEC_INITIALIZED: '1994716'

Is there any chance that in the addon configuration, can be implemented option to chose device which to use. or how to manually change device number.

thanks in advance

btw, great addon, worked for a months without errors, before upgraded HA to newer versions..

thanks in advance

zettalion commented 3 years ago

@mkomarac Mine Stopped working for me around the same time. Do you suspect the owner of this addon has moved on? I'm thinking about moving away from 433 MHz sensors and this may be the nudge I needed. Did you manage to get yours working?

mkomarac commented 3 years ago

Didn't manage to make it working. I think the problem is that my Home assistant registered TV tuner @USB n04 rather than USB01, and plugin looking at USB01, and can't map device USB01, because it's not USB rtl... if there would be option, to choose USB device Number XX where RTL is, it would be great, and that could be solution...

spiderrr commented 3 years ago

the same problem

spiderrr commented 3 years ago

I think its container permission problem

james-fry / hassio-addons

After Upgrading HA, addon stopped working #42