jamieernest / Dell-Inspiron-7501-Hackintosh

Hackintosh for Dell Inspiron 750x/ Dell Vostro 750x
24 stars 2 forks source link

trackpad issues #5

Closed justice4no1 closed 2 years ago

justice4no1 commented 3 years ago

on the latest update of Big Sur - The trackpad at times is unresponsive at bootup - I have to reboot 2 or 3 times before it starts to work again - also clearing NVRAM does not work for the issue, I suspect the kext needs an update but not sure.

jamieernest commented 3 years ago

Sorry for the late reply... I haven't updated to the latest update of Big Sur, I'll give it a try in a while. For now, the only issue I have in bootup regarding the trackpad is that it is too fast to use normally but if I log in BetterTouchTool slows it down to be useable.

ver2go commented 3 years ago

First thanks for putting all this together. I finally have it all set up. I'm seeing the same thing too. I did a fresh Catalina install with this repo then upgraded to Big Sur immediately. So no data if it was working consistently or not on Catalina.

Big Sur definitely trackpad does not work after reboots from when it was working previously. Takes several reboots to get going again.

jamieernest commented 3 years ago

That's weird, I don't have this issue. I'll update the repo hopefully within this week :)

87357163 commented 2 years ago

Hello, jamieernest, I am a fan of Chinese mainland, Xiao Bai. My notebook is also DELL 7501, which has been installing black apples. However, there are more or less problems in the configuration of EFI files. Occasionally, the whole GitHub can not be used. Occasionally, the network card is not driven. You upload GitHub packages need two phases of configuration. Can you send a compressed EFI file package for your use?

Contact: Email:pizi_bobo@icloud.com

联系方式:电子邮件:87357163@qq.com

jamieernest 大神您好,我是您中国大陆的粉丝小白,我的笔记本也是戴尔7501,一直在安装黑苹果,但是完成的EFI文件每次配置都或多或少存在一些问题,偶尔是整体不能用,偶尔是网卡未驱动,您上传GitHub的包需要二期配置,纯小白鼠,我不会配置,谢谢了。能否帮忙传一份您用的EFI压缩文件包?谢谢

jamieernest commented 2 years ago

@justice4no1 @ver2go I just updated the files, do you mind giving it a try? I'm sorry for not working on this for so long, I was really busy the past few months. Thank you!

ver2go commented 2 years ago

Thanks for updating this. The trackpad still requires several reboots for it to work if it doesn't work on the first boo. It's really odd why this happens because nothing is really changing other than a reboot.

I'm not sure if I can provide anything that can help. I tried enabling logging in OC before, but nothing stood out but I'm not sure what I'm looking for either.

Don't stress too much over this. I appreciate your work. I can live with several reboots and when I can't, I just boot into linux.

jamieernest commented 2 years ago

Thats weird... Can I take a look at your EFI?

ver2go commented 2 years ago

It is pretty much just drop in from your release. I changed config.plist for my

SystemUUID SytemSerialNumber ROM MLB

EFI.zip

On a broadcom card, it works as well as BT, so I didn't need to change the kext for it.

jamieernest commented 2 years ago

config.plist.zip Do you mind trying this config? It's just basically your config with a different AML loading order

ver2go commented 2 years ago

Wow. I "think" that should do it. Only 3 boots so far. The first boot trackpad didn't work. Second boot it worked. So I tried a reboot again and it worked.

I usually do not get that kind of working to non working rate on boots, so thank you.

I'll keep trying and if still have issues, I'll diff config.plist to play around with order some more. But much better than before on the few tries so far.

jamieernest commented 2 years ago

Sounds great! Thanks for giving me the feedback! Keep me posted if there are any issues, and if there arent just close this issue :)

ver2go commented 2 years ago

Sorry. It looks like I just got lucky. Rebooted again today and took many tries to get track pad to work. So I diffed the config.plist you asked to try to see what order you changed. It turns out to be the same as before. What do you think I should move around I load order?

Thanks.

On Sat, Jan 15, 2022, 12:33 AM Jamie (dafuq) @.***> wrote:

Sounds great! Thanks for giving me the feedback! Keep me posted if there are any issues, and if there arent just close this issue :)

— Reply to this email directly, view it on GitHub https://github.com/jamieernest/Dell-Inspiron-7501-Hackintosh/issues/5#issuecomment-1013643583, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACHIYAB3FJLY7CALCBGHAHTUWEWOZANCNFSM4ZGZXWFQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

You are receiving this because you were mentioned.Message ID: @.***>

jamieernest commented 2 years ago

When you open the config.plist just press command+shift+r and select the OC folder, then when it asks you for VoodoooInput just press 'Yes'

cj0716 commented 2 years ago

我的电脑是 dell vostro 7500 i5 10300h 16gb 1650 512gb 感谢您提供的efi,特意注册github来感谢您

jamieernest commented 2 years ago

@cj0716 不客氣,我很高興你喜歡我的 EFI :)

jamieernest commented 2 years ago

no further info, I am unable to replicate