Hang on boot , after install from SD and dont bootup

[GoogleCodeExporter]

What steps will reproduce the problem?
1. i install from sd install script
2. i try to flash direct to flash
3. i only get the green(ANDRO) boot screen for 8 ever (i wait for 30mn) and
the same

this problem start from ver koolu version v7 i cnot install the ANDRO

i install on 2g sd card  paration to F32 and ext3

its start the install script and after install all the QI boot and habg on
the boot screen of ANDRO

Original issue reported on code.google.com by Xro...@gmail.com on 2 Oct 2009 at 4:07

[GoogleCodeExporter]

Can you provide a logcat of this issue?

Original comment by michaelt...@gmail.com on 3 Oct 2009 at 10:33

[GoogleCodeExporter]

michaeltrimarchi =>  How can i provide Logcat , the andro hang on the 1st boot 
screen 

how can i see log ?

Original comment by Xro...@gmail.com on 3 Oct 2009 at 10:47

[GoogleCodeExporter]

This sounds like the same problem I had. Check out issue 16: 
http://code.google.com/
p/android-on-freerunner/issues/detail?id=16&can=1
You could try flashing the attached kernel which is version 0.1.1 with a 
modified 
init.rc as described in issue 16.

Original comment by anbugge on 5 Oct 2009 at 8:17

Attachments:

• kernel.img

[GoogleCodeExporter]

ok Thanks
after i put the image on the sd card its booting and all ok
the probelms is very slow response the andro

is it the last kernel.img ?

Thanks for the help

Original comment by Xro...@gmail.com on 5 Oct 2009 at 9:45

[GoogleCodeExporter]

It's the latest official release with my small changes.
I don't know if there has been any changes to the kernel after the 0.1.1 
release.

Original comment by anbugge on 5 Oct 2009 at 9:51

[GoogleCodeExporter]

@anbugge
If your changes are a fix for the booting problems then they should be pushed 
to the 
Gitorious repository.  Then we can close this issue.

Original comment by hmu...@gmail.com on 6 Oct 2009 at 4:05

[GoogleCodeExporter]

My change basically uses the ext3 partition on uSD for /data/ instead of NAND. 
For 
some reason, NAND doesn't work for a few of us.

I don't know the proper git way of doing stuff, but I'll attach the diff output 
for 
init.rc.

I've not tried using this with the automatic sd-install, only dfu, but 
apparently 
automatic install worked for Xroot0.

Original comment by anbugge on 6 Oct 2009 at 11:05

Attachments:

• init.rc.diff

[GoogleCodeExporter]

yes it work on automatic install
i put the autoinstall.zip to the sd card and then i replace the kernel to 
kernel.img 
from  'anbugge' and make the install , after this all work ok and no error.

i have this problem from version 7 of kuulo version and for this i stop use the 
andro on the freerunner antil know.

if its work for all its look like its need to be the defualt 'init.rc' in the 
repository
Thanks all for helping

Original comment by Xro...@gmail.com on 7 Oct 2009 at 7:37

[GoogleCodeExporter]

This init.rc going back to the older Koolu model of having the data partition 
on SD.
I would rather do two versions, one NAND and the other SD. That would also 
resolve
http://code.google.com/p/android-on-freerunner/issues/detail?id=7 and make it 
easier
for other Freerunner owners to try Android.

Original comment by scarhill on 7 Oct 2009 at 8:22

[GoogleCodeExporter]

how about theis fix on the last image 
i download the last image and its have the bug ?
i cnot boot

Original comment by Xro...@gmail.com on 27 Nov 2009 at 2:40

[GoogleCodeExporter]

Issue 85 has been merged into this issue.

Original comment by scarhill on 27 Nov 2009 at 4:12

[GoogleCodeExporter]

i put the last image to SD
and i still have the same problem no boot
i replace it with the old kernel.img  and ites booting

the problem is i cnot use the new image , i mast replace the kernel.img   to 
old from
this issue .

is any way to fix it on the build host.

Original comment by Xro...@gmail.com on 17 Dec 2009 at 6:02

[GoogleCodeExporter]

I had the same problem (freerunner stuck during the splashscreen) and i tried 
the 
kernel img attached to one of the previous post.

result: after the first few steps (until the white screen), the display turned 
black 
and now the phone seems to be dead.

I cannot enter the bootloader or turn it on, if I turn it on it seems alive (it 
vibrates for half a second or so), but the screen is always black (ON, but 
black).

any help is much appreciated

thanks

Original comment by altini.m...@gmail.com on 20 Feb 2010 at 11:49

[GoogleCodeExporter]

Please, try image from Issue7 ( as shown above ) from:
http://code.google.com/p/android-on-freerunner/issues/detail?id=7&colspec=ID%20T
ype%20Status%20Priority%20Owner%20Summary%20BuildVersion%20AndroidVersion%20Comp
onent

Original comment by Alexandr...@gmail.com on 20 Feb 2010 at 12:22

[GoogleCodeExporter]

That kernel is very old (october), and probably doesn't work at all with newer 
versions.

These messages might shed some light on the root cause of the problem, the 
error 
messages he got are similar to what I encountered when debugging my issues: 
http://groups.google.com/group/android-on-
freerunner/browse_thread/thread/2046564c97169913/51e43b6e5927ce76?lnk=gst

I haven't played with my freerunner lately, so I haven't tried any of this 
myself.

Original comment by anbugge on 20 Feb 2010 at 2:31

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Hi,
the SD booting doesn't work for me, the only way I had to install android was 
using 
the .bin and .jffs2 (and dfu-util) from 
http://panicking.kicks-ass.org/download/ 
(cupcake)

I would like to install the latest version (since I have some problem with the 
one 
I'm running now, e.g. process.media crashes always, making it impossible to use 
the 
phone) but I see that in the download section those kind of files are not 
available 
(.bin and .jffs2).

I also tried to install the .img and .bin with dfu-util but I had no luck.

Original comment by altini.m...@gmail.com on 22 Feb 2010 at 6:23