search

jankrause / idocit

Automatically exported from code.google.com/p/idocit
0 stars 0 forks source link

Workbench freezes after clearing the reference grid #82

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 

What steps will reproduce the problem?
1. Open an interface with iDocIt!.
2. Click on an operation which could be classified.
3. Mark the grid as reference grid.
4. Clear the reference grid.

What is the expected output? What do you see instead?
I expect that the reference grid is cleared, but the workbench freezes.

Original issue reported on code.google.com by krauseda...@web.de on 17 Nov 2011 at 8:47

GoogleCodeExporter commented 9 years ago

Original comment by krauseda...@web.de on 23 Feb 2012 at 4:36

GoogleCodeExporter commented 9 years ago 
If you have cleared the reference grid it resulted in an infinite event loop, 
because the action listeners where removed wrong.

Original comment by dirk.mei...@gmail.com on 3 Apr 2012 at 9:20

GoogleCodeExporter commented 9 years ago 
This issue was closed by revision r572.

Original comment by dirk.mei...@gmail.com on 3 Apr 2012 at 9:22

GoogleCodeExporter commented 9 years ago 
I tested this issue and it works for me. I close this issue.

Original comment by krauseda...@web.de on 13 Apr 2012 at 12:15