search

jason0x43 / hubitat

Hubitat apps and drivers
The Unlicense
57 stars 39 forks source link

Does not find Wemo Dimmer v2 WDS060 #12

Open saurin13 opened 3 years ago

saurin13 commented 3 years ago

The wemo dimmer v2 model WDS060 does not seem to be found in hubitat

jason0x43 commented 3 years ago

Do you have other working wemo devices?

saurin13 commented 3 years ago

Yes I have about 50 other devices: v2 switches, 3-way dimmer, plug, outdoor switch, v1 dimmer - only the v2 dimmer does not show up

jason0x43 commented 3 years ago

Try opening the Connect app in Hubitat and then open a new tab with the Hubitat log. You should see handleSsdpEvent messages periodically show up (the Connect app sends out discovery requests every 30 seconds). Do any of those mention the dimmer in question? It's possible the dimmer isn't being discovered, or it is but the app doesn't know what to do with it.

Hutch1963 commented 3 years ago

Hey @jason0x43, I am encountering the same issue as saurin13 . I have setup 15 wemo switches, plugs and dimmer just fine, however i have 2 new wemo dimmers that are not being discovered. I did as you recommended and checked the log and there is no mention of the 2 missing dimmers. Can you help?

jason0x43 commented 3 years ago

Hmmm...I don't have any great ideas off the top of my head. I only have a couple of 1st gen Wemo devices (a motion sensor and an outlet), so diagnosing issues with newer devices is...tricky.

I can help out if someone with one of these devices wants to try to diagnose what's going on, but I doubt I'll be able to do much directly.

saurin13 commented 3 years ago

Thanks I am happy to try to help out let me know what I can do

On Mon, Jan 4, 2021 at 9:07 PM Jason Cheatham notifications@github.com wrote:

Hmmm...I don't have any great ideas off the top of my head. I only have a couple of 1st gen Wemo devices (a motion sensor and an outlet), so diagnosing issues with newer devices is...tricky.

I can help out if someone with one of these devices wants to try to diagnose what's going on, but I doubt I'll be able to do much directly.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/jason0x43/hubitat/issues/12#issuecomment-754338280, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANB5WSHZHALRERKAA7QEWSLSYJX57ANCNFSM4TNV7GKA .

-- Saurin

DIGSDUG commented 3 years ago

Was there ever any resolution or fix to this issue? I’m having the same issue with my Wemo v2 dimmer switch