tried it on a RG503 but no sound

[sostella]

Hi, I have a RG503 and tried on it. I managed to install arkOS. I plugged the teensy with M8. M8 is working except from the sound. The sound looks ok in the mixer view. I tried the 3 commands you told about with and without sudo. it says deamon startup failed. written in red. Would you have an idea of what I could do for this to work maybe?

[sostella]

Ok it seems that I did not have the teensy well plugged in when installing pulse. Problem solved

Édit : actually it is working only if I turn the console on and only after plug the teensy. If I turn it on with the teensy plugged I have no sound at all

[kolyan94]

I had the same issue with 353p, so maybe they have the same chip inside =(

[smootalicious]

This could be an issue with the order in which the audio is enumerated on the 503 and 353. You could try a custom alsaloop command. See below.

Commands: card# depends on order connected to the rg351 For best results, plug in teensy first, then external sound card then midi

aplay -l shows playback devices

arecord -l shows capture devices

Example for aplay and arecord M8 is connected then external USB Audio device is connected

ark@rg351v:/roms2/ports/M8$ aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: rockchiprk817co [rockchip,rk817-codec], device 0: ff070000.i2s-rk817-hifi rk817-hifi-0 []
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 1: M8 [M8], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Device [USB Sound Device], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

ark@rg351v:/roms2/ports/M8$ arecord -l

**** List of CAPTURE Hardware Devices ****
card 0: rockchiprk817co [rockchip,rk817-codec], device 0: ff070000.i2s-rk817-hifi rk817-hifi-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: M8 [M8], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Device [USB Sound Device], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Connect M8 to rockchip out alsaloop -P hw:0,0 -C hw:1,0 -t 200000 -A 5 --rate 44100 --sync=0 -T -1 -d

You can edit the alsaloop_wait file with the correct alsaloop command

[smootalicious]

PulseAudio

Determine active audio ports on USB audio If you get errors, you may need to restart pulse before each command.

Input ports

First stop emulationstation ark@rg351v:/roms2/ports/M8$ sudo systemctl stop emulationstation

ark@rg351v:/roms2/ports/M8$ sudo pulseaudio --start
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).

ark@rg351v:/roms2/ports/M8$ sudo pacmd
>>> list-sources
4 source(s) available.
...
      ports:
                analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: unknown)
                        properties:

        active port: <analog-input-linein>
...

to change active input port: >>> set-source-port <index#> analog-input-linein or >>> set-source-port <index#> analog-input-mic

Output Ports >>>list-sinks Note the sinks

Exit pacmd >>> exit

Restart emulationstation ark@rg351v:/roms2/ports/M8$ sudo systemctl start emulationstation

Edit the pulseaudio_pa file - set the sink and source corresponding to the correct device index from the listings in pacmd

[kolyan94]

Thanks, unfortunately, I sold my 353p Now using 351v and very happy. I found that no matter what Linux-based OS I had in 353p when I turned on the console with the plugged-in headless I had no sound in the system at all. Maybe for the future 503/353v/p/mp users, we could add some hints to the readme file. For myself, I decided to save some money and buy a real m8 because now they are available every Monday =) Just need to get the next salary, forgot about taxes (+150Є) =(