APM HIL firmware can't save eeprom

GoogleCodeExporter commented 8 years ago

What steps will reproduce the problem?
1.upload HIL firmware
2.erase settings using APM Planner
3.calibrate radio input / or change some pids using APM Planner's configure 
tab, and then save
4.reboot the APM board

What is the expected output? What do you see instead?
the RCx_MIN, RCx_MAX, PIDs should be what have been sett. Instead, after 
reboot, they seems to be the default values, and the settings are lost. 
However, if I load the real plane firmware, the settings can be saved.

What version of the product are you using? On what operating system?
APM 2.21, Windows 7

Please provide any additional information below.

Original issue reported on code.google.com by hazy...@gmail.com on 6 Aug 2011 at 3:20

GoogleCodeExporter commented 8 years ago

Original comment by hazy...@gmail.com on 6 Aug 2011 at 3:21

Removed labels: Priority-Medium, Type-Defect

GoogleCodeExporter commented 8 years ago

cant reproduce your problem

Original comment by Meee...@gmail.com on 7 Aug 2011 at 9:28

GoogleCodeExporter commented 8 years ago

try clearing your eeprom before you begin.

Original comment by Meee...@gmail.com on 10 Aug 2011 at 2:18

GoogleCodeExporter commented 8 years ago

epprom apvar issue has been fixed, so should be back to normal on the latest 
trunk builds

Original comment by Meee...@gmail.com on 7 Sep 2011 at 11:57

GoogleCodeExporter commented 8 years ago

Original comment by Meee...@gmail.com on 13 Sep 2011 at 1:03

Changed state: Fixed

jaspreeth / ardupilot-mega

APM HIL firmware can't save eeprom #390