search

javipalanca / spade

Smart Python Agent Development Environment
MIT License
252 stars 98 forks source link

aioxmpp error connecting to Prosody IM #53

Closed hdonancio closed 5 years ago

hdonancio commented 5 years ago

Description

I have installed a Prosody IM server. This works with SPADE in localhost when I configure in prosody.cfg.lua the virtualhost as 'localhost" and using a DNSmasq I can find it in a LAN using another virtualhost like 'spade.loc'.

I saw the documentation in Prosody server and found issues about SRV records, then I configure my Prosody config file inserting this information and it works.

But now, the aioxmmp show me the follow error:

aioxmpp.errors.MultiOSError: failed to connect to XMPP domain 'spade.loc': multiple errors: stream error: {urn:ietf:params:xml:ns:xmpp-streams}undefined-condition ('No stream features to proceed with') I already have the 'smacks' mod to handler with streams, but it not works.

What I Did

Follows, my Prosody config file:


-- Prosody Example Configuration File
    --
    -- Information on configuring Prosody can be found on our
    -- website at https://prosody.im/doc/configure
    --
    -- Tip: You can check that the syntax of this file is correct
    -- when you have finished by running this command:
    --     prosodyctl check config
    -- If there are any errors, it will let you know what and where
    -- they are, otherwise it will keep quiet.
    --
    -- The only thing left to do is rename this file to remove the .dist ending, and fill in the
    -- blanks. Good luck, and happy Jabbering!

    ---------- Server-wide settings ----------
    -- Settings in this section apply to the whole server and are the default settings
    -- for any virtual hosts

    -- This is a (by default, empty) list of accounts that are admins
    -- for the server. Note that you must create the accounts separately
    -- (see https://prosody.im/doc/creating_accounts for info)
    -- Example: admins = { "user1@example.com", "user2@example.net" }
    admins = { }

    -- Enable use of libevent for better performance under high load
    -- For more information see: https://prosody.im/doc/libevent
    --use_libevent = true

    -- Prosody will always look in its source directory for modules, but
    -- this option allows you to specify additional locations where Prosody
    -- will look for modules first. For community modules, see https://modules.prosody.im/
    --plugin_paths = {}

    -- This is the list of modules Prosody will load on startup.
    -- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
    -- Documentation for bundled modules can be found at: https://prosody.im/doc/modules
    modules_enabled = {

        -- Generally required
            "roster"; -- Allow users to have a roster. Recommended ;)
            "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
            --"tls"; -- Add support for secure TLS on c2s/s2s connections
            "dialback"; -- s2s dialback support
            "disco"; -- Service discovery

        -- Not essential, but recommended
            "carbons"; -- Keep multiple clients in sync
            "pep"; -- Enables users to publish their mood, activity, playing music and more
            "private"; -- Private XML storage (for room bookmarks, etc.)
            "blocklist"; -- Allow users to block communications with other users
            "vcard"; -- Allow users to set vCards

        -- Nice to have
            "version"; -- Replies to server version requests
            "uptime"; -- Report how long server has been running
            "time"; -- Let others know the time here on this server
            "ping"; -- Replies to XMPP pings with pongs
            "register"; -- Allow users to register on this server using a client and change passwords
            "mam"; -- Store messages in an archive and allow users to access it
            "smacks"; -- Stream manager
        -- Admin interfaces
            "admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
            "admin_telnet"; -- Opens telnet console interface on localhost port 5582

        -- HTTP modules
            "bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
            "websocket"; -- XMPP over WebSockets
            "http_files"; -- Serve static files from a directory over HTTP

        -- Other specific functionality
            "limits"; -- Enable bandwidth limiting for XMPP connections
            "groups"; -- Shared roster support
            "server_contact_info"; -- Publish contact information for this service
            "announce"; -- Send announcement to all online users
            "welcome"; -- Welcome users who register accounts
            "watchregistrations"; -- Alert admins of registrations
            "motd"; -- Send a message to users when they log in
            "legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
            "proxy65"; -- Enables a file transfer proxy service which clients behind NAT can use
    }

    -- These modules are auto-loaded, but should you want
    -- to disable them then uncomment them here:
    modules_disabled = {
        -- "offline"; -- Store offline messages
        -- "c2s"; -- Handle client connections
        -- "s2s"; -- Handle server-to-server connections
        -- "posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
    }

    -- Disable account creation by default, for security
    -- For more information see https://prosody.im/doc/creating_accounts
    allow_registration = true

    -- Force clients to use encrypted connections? This option will
    -- prevent clients from authenticating unless they are using encryption.

    c2s_require_encryption = true

    -- Force servers to use encrypted connections? This option will
    -- prevent servers from authenticating unless they are using encryption.
    -- Note that this is different from authentication

    s2s_require_encryption = true

    -- Force certificate authentication for server-to-server connections?
    -- This provides ideal security, but requires servers you communicate
    -- with to support encryption AND present valid, trusted certificates.
    -- NOTE: Your version of LuaSec must support certificate verification!
    -- For more information see https://prosody.im/doc/s2s#security

    s2s_secure_auth = false

    -- Some servers have invalid or self-signed certificates. You can list
    -- remote domains here that will not be required to authenticate using
    -- certificates. They will be authenticated using DNS instead, even
    -- when s2s_secure_auth is enabled.

    --s2s_insecure_domains = { "insecure.example" }

    -- Even if you leave s2s_secure_auth disabled, you can still require valid
    -- certificates for some domains by specifying a list here.

    --s2s_secure_domains = { "jabber.org" }

    -- Select the authentication backend to use. The 'internal' providers
    -- use Prosody's configured data storage to store the authentication data.
    -- To allow Prosody to offer secure authentication mechanisms to clients, the
    -- default provider stores passwords in plaintext. If you do not trust your
    -- server please see https://prosody.im/doc/modules/mod_auth_internal_hashed
    -- for information about using the hashed backend.

    authentication = "internal_hashed"

    -- Select the storage backend to use. By default Prosody uses flat files
    -- in its configured data directory, but it also supports more backends
    -- through modules. An "sql" backend is included by default, but requires
    -- additional dependencies. See https://prosody.im/doc/storage for more info.

    --storage = "sql" -- Default is "internal"

    -- For the "sql" backend, you can uncomment *one* of the below to configure:
    --sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.
    --sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
    --sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }

    -- Archiving configuration
    -- If mod_mam is enabled, Prosody will store a copy of every message. This
    -- is used to synchronize conversations between multiple clients, even if
    -- they are offline. This setting controls how long Prosody will keep
    -- messages in the archive before removing them.

    archive_expires_after = "1w" -- Remove archived messages after 1 week

    -- You can also configure messages to be stored in-memory only. For more
    -- archiving options, see https://prosody.im/doc/modules/mod_mam

    -- Logging configuration
    -- For advanced logging see https://prosody.im/doc/logging
    log = {
        info = "prosody.log"; -- Change 'info' to 'debug' for verbose logging
        error = "prosody.err";
        -- "*syslog"; -- Uncomment this for logging to syslog
        -- "*console"; -- Log to the console, useful for debugging with daemonize=false
    }

    -- Uncomment to enable statistics
    -- For more info see https://prosody.im/doc/statistics
    -- statistics = "internal"

    -- Certificates
    -- Every virtual host and component needs a certificate so that clients and
    -- servers can securely verify its identity. Prosody will automatically load
    -- certificates/keys from the directory specified here.
    -- For more information, including how to use 'prosodyctl' to auto-import certificates
    -- (from e.g. Let's Encrypt) see https://prosody.im/doc/certificates

    -- Location of directory to find certificates in (relative to main config file):
    certificates = "certs"

    ----------- Virtual hosts -----------
    -- You need to add a VirtualHost entry for each domain you wish Prosody to serve.
    -- Settings under each VirtualHost entry apply *only* to that host.

    pidfile = "prosody.pid" -- stores prosody.pid in the current directory

    VirtualHost "spade.loc"

    --VirtualHost "example.com"
    --  certificate = "/path/to/example.crt"

    ------ Components ------
    -- You can specify components to add hosts that provide special services,
    -- like multi-user conferences, and transports.
    -- For more information on components, see https://prosody.im/doc/components

    ---Set up a MUC (multi-user chat) room server on conference.example.com:
    --Component "conference.example.com" "muc"

    ---Set up an external component (default component port is 5347)
    --
    -- External components allow adding various services, such as gateways/
    -- transports to other networks like ICQ, MSN and Yahoo. For more info
    -- see: https://prosody.im/doc/components#adding_an_external_component
    --
    --Component "gateway.example.com"
    component_secret = "pedaneel"

    -- This one works great if you run Prosody direct from where you checked it out
    -- (ie. you use "./prosodyctl start")

Thanks in advance!

javipalanca commented 5 years ago

I see you define a VirtualHost called "spade.loc" But the error refers to 'lti.loc' Are those domains valid? It is supposed that the OS can resolve such domains in order to connect to the server.

hdonancio commented 5 years ago

Oh, sorry for that. I have tryed with two config files with different VirtualHosts.

I put this question in StackOverflow too, and after some searchs I find a solution to connect the Spade between two computers. The "tutorial" can be found here

harindrarasanjali commented 5 years ago

I am getting the following error after registering specific number of agents every time. I have used Python SPADE to create agents and communicate. I think it is coming right after an agent starts to send the message. This is the same for the Ejabberd server. What can I do? I was finding a solution for more than a month now. Still, I am stuck.

Oct 07 10:31:48 c2s15eb830 info Client disconnected: closed Oct 07 10:31:50 c2s14702f0 info Client disconnected: closed Oct 07 10:31:52 c2s13ec7b0 info Client disconnected: closed Oct 07 10:31:54 c2s16a0820 info Client disconnected: closed Oct 07 10:31:56 c2s1378820 info Client disconnected: closed Oct 07 10:31:58 c2s14ceda0 info Client disconnected: closed Oct 07 10:32:02 c2s13a3fb0 info Client disconnected: closed Oct 07 10:32:04 c2s1650c30 info Client disconnected: closed Oct 07 10:32:06 c2s137f960 info Client disconnected: closed Oct 07 10:32:08 c2s15ff380 info Client disconnected: closed Oct 07 10:32:10 c2s1912050 info Client disconnected: closed Oct 07 10:32:12 c2s186b9b0 info Client disconnected: closed Oct 07 10:32:14 c2s168d110 info Client disconnected: closed Oct 07 10:32:16 c2s16c5bb0 info Client disconnected: closed Oct 07 10:32:18 c2s14868e0 info Client disconnected: closed Oct 07 10:32:21 c2s164fa40 info Client disconnected: closed Oct 07 10:32:23 c2s18b4050 info Client disconnected: closed Oct 07 10:32:25 c2s16d7ae0 info Client disconnected: closed

bdpythondocker commented 4 years ago

-- Prosody Example Configuration File

-- If it wasn't already obvious, -- starts a comment, and all -- text after it on a line is ignored by Prosody.

-- The config is split into sections, a global section, and one -- for each defined host that we serve. You can add as many host -- sections as you like.

-- Lists are written _ = { "like", "this", "one" } -- Lists can also be of { 1, 2, 3 } numbers, etc. -- Either commas, or semi-colons; may be used -- as separators.

-- A table is a list of values, except each value has a name. An -- example would be:

-- -- Whitespace (that is tabs, spaces, line breaks) is mostly insignificant, so -- can -- be placed anywhere -- that you deem fitting.

-- Tip: You can check that the syntax of this file is correct -- when you have finished by running this command: -- prosodyctl check config -- If there are any errors, it will let you know what and where -- they are, otherwise it will keep quiet.

-- The only thing left to do is rename this file to remove the .dist ending, and fill in the -- blanks. Good luck, and happy Jabbering!

---------- Server-wide settings ---------- -- Settings in this section apply to the whole server and are the default settings -- for any virtual hosts

-- This is a (by default, empty) list of accounts that are admins -- for the server. Note that you must create the accounts separately -- (see https://prosody.im/doc/creating_accounts for info) -- Example: admins = { "user1@example.com", "user2@example.net" } admins = { }

-- Enable use of libevent for better performance under high load -- For more information see: https://prosody.im/doc/libevent --use_libevent = true

-- Prosody will always look in its source directory for modules, but -- this option allows you to specify additional locations where Prosody -- will look for modules first. For community modules, see https://modules.prosody.im/ --plugin_paths = {}

-- This is the list of modules Prosody will load on startup. -- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too. -- Documentation for bundled modules can be found at: https://prosody.im/doc/modules modules_enabled = {

-- Generally required
    "roster"; -- Allow users to have a roster. Recommended ;)
    "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
    "tls"; -- Add support for secure TLS on c2s/s2s connections
    "dialback"; -- s2s dialback support
    "disco"; -- Service discovery

-- Not essential, but recommended
    "carbons"; -- Keep multiple clients in sync
    "pep"; -- Enables users to publish their avatar, mood, activity, playing music and more
    "private"; -- Private XML storage (for room bookmarks, etc.)
    "blocklist"; -- Allow users to block communications with other users
    "vcard4"; -- User profiles (stored in PEP)
    "vcard_legacy"; -- Conversion between legacy vCard and PEP Avatar, vcard

-- Nice to have
    "version"; -- Replies to server version requests
    "uptime"; -- Report how long server has been running
    "time"; -- Let others know the time here on this server
    "ping"; -- Replies to XMPP pings with pongs
    "register"; -- Allow users to register on this server using a client and change passwords
    --"mam"; -- Store messages in an archive and allow users to access it
    --"csi_simple"; -- Simple Mobile optimizations

-- Admin interfaces
    "admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
    --"admin_telnet"; -- Opens telnet console interface on localhost port 5582

-- HTTP modules
    --"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
    --"websocket"; -- XMPP over WebSockets
    --"http_files"; -- Serve static files from a directory over HTTP

-- Other specific functionality
    --"limits"; -- Enable bandwidth limiting for XMPP connections
    --"groups"; -- Shared roster support
    --"server_contact_info"; -- Publish contact information for this service
    --"announce"; -- Send announcement to all online users
    --"welcome"; -- Welcome users who register accounts
    --"watchregistrations"; -- Alert admins of registrations
    --"motd"; -- Send a message to users when they log in
    --"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
    --"proxy65"; -- Enables a file transfer proxy service which clients behind NAT can use

}

-- These modules are auto-loaded, but should you want -- to disable them then uncomment them here: modules_disabled = { -- "offline"; -- Store offline messages -- "c2s"; -- Handle client connections -- "s2s"; -- Handle server-to-server connections -- "posix"; -- POSIX functionality, sends server to background, enables syslog, etc. }

-- Disable account creation by default, for security -- For more information see https://prosody.im/doc/creating_accounts allow_registration = false

-- Force clients to use encrypted connections? This option will -- prevent clients from authenticating unless they are using encryption.

c2s_require_encryption = true

-- Force servers to use encrypted connections? This option will -- prevent servers from authenticating unless they are using encryption.

s2s_require_encryption = true

-- Force certificate authentication for server-to-server connections?

s2s_secure_auth = false

-- Some servers have invalid or self-signed certificates. You can list -- remote domains here that will not be required to authenticate using -- certificates. They will be authenticated using DNS instead, even -- when s2s_secure_auth is enabled.

--s2s_insecure_domains = { "insecure.example" }

-- Even if you disable s2s_secure_auth, you can still require valid -- certificates for some domains by specifying a list here.

--s2s_secure_domains = { "jabber.org" }

-- Select the authentication backend to use. The 'internal' providers -- use Prosody's configured data storage to store the authentication data.

authentication = "internal_hashed"

-- Select the storage backend to use. By default Prosody uses flat files -- in its configured data directory, but it also supports more backends -- through modules. An "sql" backend is included by default, but requires -- additional dependencies. See https://prosody.im/doc/storage for more info.

--storage = "sql" -- Default is "internal"

-- For the "sql" backend, you can uncomment one of the below to configure: --sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename. --sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" } --sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }

-- Archiving configuration -- If mod_mam is enabled, Prosody will store a copy of every message. This -- is used to synchronize conversations between multiple clients, even if -- they are offline. This setting controls how long Prosody will keep -- messages in the archive before removing them.

archive_expires_after = "1w" -- Remove archived messages after 1 week

-- You can also configure messages to be stored in-memory only. For more -- archiving options, see https://prosody.im/doc/modules/mod_mam

-- Logging configuration -- For advanced logging see https://prosody.im/doc/logging log = { info = "prosody.log"; -- Change 'info' to 'debug' for verbose logging error = "prosody.err"; -- "syslog"; -- Uncomment this for logging to syslog -- "console"; -- Log to the console, useful for debugging with daemonize=false }

-- Uncomment to enable statistics -- For more info see https://prosody.im/doc/statistics -- statistics = "internal"

-- Certificates -- Every virtual host and component needs a certificate so that clients and -- servers can securely verify its identity. Prosody will automatically load -- certificates/keys from the directory specified here. -- For more information, including how to use 'prosodyctl' to auto-import certificates -- (from e.g. Let's Encrypt) see https://prosody.im/doc/certificates

-- Location of directory to find certificates in (relative to main config file): certificates = "certs"

-- HTTPS currently only supports a single certificate, specify it here: --https_certificate = "certs/localhost.crt"

----------- Virtual hosts ----------- -- You need to add a VirtualHost entry for each domain you wish Prosody to serve. -- Settings under each VirtualHost entry apply only to that host.

VirtualHost "prosody"

--VirtualHost "example.com" -- certificate = "/path/to/example.crt"

------ Components ------ -- You can specify components to add hosts that provide special services, -- like multi-user conferences, and transports. -- For more information on components, see https://prosody.im/doc/components

---Set up a MUC (multi-user chat) room server on conference.example.com: --Component "conference.example.com" "muc" --- Store MUC messages in an archive and allow users to access it --modules_enabled = { "muc_mam" }

---Set up an external component (default component port is 5347)

-- External components allow adding various services, such as gateways/ -- transports to other networks like ICQ, MSN and Yahoo. For more info -- see: https://prosody.im/doc/components#adding_an_external_component

--Component "gateway.example.com" -- component_secret = "password"

I got this problem: aioxmpp.errors.MultiOSError: failed to connect to XMPP domain 'prosody': multiple errors: stream error: {urn:ietf:params:xml:ns:xmpp-streams}undefined-condition ('No stream features to proceed with')