Open GoogleCodeExporter opened 9 years ago
Enable IGMP/MLD proxy.
/Kitch
Original comment by kitch2400
on 20 Jan 2014 at 12:00
"Enable IGMP/MLD Snooping"?
Enabled, problem was not solved.
Original comment by santor...@gmail.com
on 20 Jan 2014 at 12:04
How often does the freezing occur? Is it resolved if you swap the channel back
and forth? Or does it go away by itself?
Original comment by kitch2400
on 20 Jan 2014 at 12:17
Obviously multicast routing should also be enabled .]
Original comment by kitch2400
on 20 Jan 2014 at 12:20
Multicast routing enabled, of course. Problem is permanetn - any chanel works
only 5 minutes and totaly freezez. When it freezes - I changing chanel backward
or forward and go to previous chanel, it will works another 5 minutes. By
itself - no.
Original comment by santor...@gmail.com
on 20 Jan 2014 at 12:28
Ok. Sounds like a IGMP General Query or membership report isn't reaching its
destination. Does it work w.o. our beloved Asus?
Original comment by kitch2400
on 20 Jan 2014 at 1:37
Without Asus all works OK.
Original comment by santor...@gmail.com
on 20 Jan 2014 at 2:16
I suppose you're connecting your STB via cable?
If you have igmp proxy/snooping turned on it should not behave like this. Try
rebooting your router and your STB in that order.
Original comment by kitch2400
on 20 Jan 2014 at 3:58
It's a PC, via cable. igmp proxy/snooping on or off - no difference
Original comment by santor...@gmail.com
on 20 Jan 2014 at 4:41
And at stock asus firmware all works fine. So I think problem in this
firmware...
Original comment by santor...@gmail.com
on 20 Jan 2014 at 4:43
That sounds odd. Try going back to factory defaults -> flash 075 again. Im
subscribing both to my ISPs iptv-service, and have 2 media servers running
24-7, and I have never encountered this issue.
Original comment by kitch2400
on 20 Jan 2014 at 7:26
I don't have any problem with IPTV.
Please check your config.
http://files.rt-n56u.googlecode.com/git/pic/web-lan-iptv-en.png
Original comment by Dr.Sydorenko.O
on 24 Jan 2014 at 3:32
Yes, config the same.
Original comment by santor...@gmail.com
on 26 Jan 2014 at 3:32
Original issue reported on code.google.com by
santor...@gmail.com
on 17 Jan 2014 at 1:24