Mar 5 13:23:19 pppd[1253]: Plugin pptp.so loaded.
Mar 5 13:23:19 pppd[1253]: PPTP plugin version 0.8.5 compiled for pppd-2.4.5
Mar 5 13:23:19 pppd[1253]: pppd 2.4.5 started by bosco, uid 0
Mar 5 13:23:19 pppd[1253]: Using interface ppp10
Mar 5 13:23:19 pppd[1253]: Connect: ppp10 <--> pptp (XXX.XXX.XXX.XXX)
Mar 5 13:23:22 pppd[1253]: MPPE 128-bit stateless compression enabled
Hi,
I'm using RT-n56u as VPN PPTP server to access my home line from work.
I use Win7 as a client with Symantec FW enabled and of course I am behind some
FW in the office.
I experience very often disconnects, like every 5-10 minutes, which is quite
annoying. Could you please help me to pin down the root cause of it?
I got a message in the router log: Mar 5 13:37:22 pppd[1253]: LCP terminated
by peer (DM-^wM-a^@<M-Mt^@^@^@^@)
What does (DM-^wM-a^@<M-Mt^@^@^@^@) means? Could it be translated into
something more human readable, including error code, etc?
See below more details from the log
Mar 5 13:23:23 pppd[1253]: found interface br0 for proxy arp
Mar 5 13:23:23 pppd[1253]: local IP address XXX.XX.XX.1
Mar 5 13:23:23 pppd[1253]: remote IP address XXX.XX.XX.XXX
Mar 5 13:23:23 VPN server: peer XXX.XXX.XXX.XXX (XXXXX) connected - ifname:
ppp10, local IP: XXX.XX.XX.250
Mar 5 13:32:14 kernel: Ralink HW NAT v2.50.7 Module Disabled
Mar 5 13:32:14 kernel: Ralink HW NAT v2.50.7 Module Enabled, ASIC: RT3883,
REV: 0105, FoE Size: 16384
Mar 5 13:32:14 RT-N56U: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload
[WAN]<->[LAN/WLAN]
Mar 5 13:32:14 RT-N56U: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Mar 5 13:32:14 RT-N56U: Hardware NAT/Routing: IPv6 routes offload - OFF
Mar 5 13:37:22 pppd[1253]: LCP terminated by peer (DM-^wM-a^@<M-Mt^@^@^@^@)
Mar 5 13:37:22 pppd[1253]: Connect time 14.0 minutes.
Original issue reported on code.google.com by Pavel.Ma...@gmail.com on 5 Mar 2014 at 9:52
Original issue reported on code.google.com by
Pavel.Ma...@gmail.comon 5 Mar 2014 at 9:52