search

jayofelony / pwnagotchi

(⌐■_■) - Deep Reinforcement Learning instrumenting bettercap for WiFi pwning.
Other
836 stars 102 forks source link

[BUG] Rpi pi zero 2 W dose not boot #206

Open AchimGrolimund opened 1 day ago

AchimGrolimund commented 1 day ago

Describe the bug the Raspberry will not start. i downloaded the 64bit image with version 2.8.9 and flashed it to an sd with the raspberry imager. when i plugged it in, the green led has been lit constantly without interruption for an hour. i have tried both ports (usb pwr and data) but the same result.

is it possible that this pwnagotchi img is not compatible with the rpizero2w?

To Reproduce Steps to reproduce the behavior:

  1. flash 64bit 2.8.9 to sd
  2. start it with rpi zero 2 w
  3. green light goes on constantly without blinking or else
AchimGrolimund commented 1 day ago

image

wpa-2 commented 1 day ago

There's no bug it works fine with the pizero2! I suggest a reflash and start here https://github.com/jayofelony/pwnagotchi/wiki

AchimGrolimund commented 1 day ago

i wil flush it again. in the meantime i test out the default 64 bit raspian and it works.

in 15 min i can gife a feedback.

image
wpa-2 commented 1 day ago

image

Is this connected to your pc?
Because your on the wrong port if so, you need to use data for it to show up as a network device.

AchimGrolimund commented 1 day ago

hey @wpa-2 same. i flash it with the exact settings written in the Wiki. Exactly the same behavior. Green LED is lightning constantly.

wpa-2 commented 1 day ago

hey @wpa-2 same. i flash it with the exact settings written in the Wiki. Exactly the same behavior. Green LED is lightning constantly.

~Are you still using the power port?

AchimGrolimund commented 1 day ago

image

Is this connected to your pc? Because your on the wrong port if so, you need to use data for it to show up as a network device.

as i wrote. i triet booth. not it is only conectet to the data port and to my notebok. (mac)

AchimGrolimund commented 1 day ago

hey @wpa-2 same. i flash it with the exact settings written in the Wiki. Exactly the same behavior. Green LED is lightning constantly.

~Are you still using the power port?

image 😉😉

wpa-2 commented 1 day ago

Follow this https://pwnagotchi.org/getting-started/first-run-mac/index.html

AchimGrolimund commented 1 day ago

i know all those sites =) i have an allready running rpi4b. but i want to run int on the zero2 ;-)

as you can see, also the RNDIS is not shown in the settings.

image

hmm im wondering if it is posible to use the SDcard from the RPI4B inside the Zero2? booth are 64Bit.

i had also the same issue with the zero 1... but with the 32bit version. weird