Thank you for developing and improving the firmware. Unlike the author of the device...
As a beginner in constructing such robots, I saw many incomprehensible moments and described them in the discord.
But the author blocked my access. I don’t know why, either I didn’t like the activity, or my online translator translated from Russian too roughly...
In any case, I believe that you have read my posts and slightly modified the firmware.
Manual control is a must. Since many scripts are completely boring and only repeat movements on the screen, without giving sensations like in reality. It's good that you implemented this.
I believe the red button on the side should work like Break\Start
Moreover, Break is a sharp rise of the fleshlight upward and cancellation of Tcode reception
And Start is a smooth lowering of the fleshlight down and activation of Tcode reception (smooth, that’s the key word)
I hope why this is needed is clear. For example, when the power to the servos is turned off, one of them constantly jams if you try to move it manually, but it works normally when power is applied. It turns out that you can’t get out from under the device...
Vesa mounts would save the day here, but I haven’t been able to find the optimal one yet, although I’ve printed a lot of them.
Thank you for developing and improving the firmware. Unlike the author of the device... As a beginner in constructing such robots, I saw many incomprehensible moments and described them in the discord. But the author blocked my access. I don’t know why, either I didn’t like the activity, or my online translator translated from Russian too roughly... In any case, I believe that you have read my posts and slightly modified the firmware. Manual control is a must. Since many scripts are completely boring and only repeat movements on the screen, without giving sensations like in reality. It's good that you implemented this. I believe the red button on the side should work like Break\Start Moreover, Break is a sharp rise of the fleshlight upward and cancellation of Tcode reception And Start is a smooth lowering of the fleshlight down and activation of Tcode reception (smooth, that’s the key word) I hope why this is needed is clear. For example, when the power to the servos is turned off, one of them constantly jams if you try to move it manually, but it works normally when power is applied. It turns out that you can’t get out from under the device... Vesa mounts would save the day here, but I haven’t been able to find the optimal one yet, although I’ve printed a lot of them.