Open pierred510 opened 11 months ago
it's look like the issue #48... but waiting 30mn doesn't change anything
Have you tried resetting to defaults using the reset button? This looks more like a configuration issue.
Thank you for your answer Yes i tried but it doesn't work I don't have the router anymore so i can't try anything else
i have this same issue with r6700v2 which seems to have same settings as r6800
ive tried doing the 30 30 30 and turning off then running nmrpflash. i get a solid amber power light and a white light in for lan 1.
@jakeisrollin
Please post
nmrpflash
command used, and run it with -vv
.nmrpflash
with -vv
, and post the full output.Also, try setting your computers IP to 10.164.183.252
, and try pinging 10.164.183.253
. These are the IP addresses used by nmrpflash
by default - maybe your device "remembers" these addresses?
Hi i used nmrpflash to go back to stock firmware the install seems ok : i have the message "reboot your device now" i tried to wait 30 mn to reboot but the reboot doesn't work : i have the solde amber when i plugged with static ip adress, i can't ping the 192.168.1.1 adress i installe several time and the step "Received keep-alive request" seems to be more and more longer (700s the last time)
when i boot with the reset mode, i have th white led blinking; but i can't ping the routeur
any idea ?