Hanging on the last step of initialisation

explit7 commented 8 years ago

The app hangs on the last step of initialisation: 11/11 Supported PID's 0101-0120...

explit7 commented 8 years ago

screenshot_20160813_001

screenshoot attached

Using this ELM327 Adapter 20160813_001

jdrescher2006 commented 8 years ago

Thanks for your feedback, I will look into this.

jdrescher2006 commented 8 years ago

Please try the new version from openrepos. It has several bug fixes. If your problem is not solved, enable the debug file writing. Then reproduce the error and send the log file to me.

explit7 commented 8 years ago

Thanks. Seems this problems comes only when conectyng to the old OBD Adapters like this. http://images.bidorbuy.co.za/user_images/727/2056727_110825162008_elmblue3.JPG

I also tried the old version with this one: http://www.ebay.de/itm/252485839321?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

And it was running fine.

Now will test your new version

Kind regards / Mit freundlichen Grüßen Pawel Radomychelski ExPLIT IT Solutions

On 6 September 2016 at 21:01, Jens Drescher notifications@github.com wrote:

Please try the new version from openrepos. It has several bug fixes. If your problem is not solved, enable the debug file writing. Then reproduce the error and send the log file to me.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/jdrescher2006/OBDFish/issues/4#issuecomment-245054544, or mute the thread https://github.com/notifications/unsubscribe-auth/ALTaPA40XU2DAgmUR_XlzovmpwvDGLiFks5qnbhwgaJpZM4JjrGw .

jdrescher2006 commented 8 years ago

That sounds interesting. I think the old adapter does something weird. Maybe I'm able to fix this if you send me the debug file.

Am 6. September 2016 21:08:44 MESZ, schrieb ExPLIT notifications@github.com:

Thanks. Seems this problems comes only when conectyng to the old OBD Adapters like this. http://images.bidorbuy.co.za/user_images/727/2056727_110825162008_elmblue3.JPG

I also tried the old version with this one: http://www.ebay.de/itm/252485839321?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

And it was running fine.

Now will test your new version

Kind regards / Mit freundlichen Grüßen Pawel Radomychelski ExPLIT IT Solutions

On 6 September 2016 at 21:01, Jens Drescher notifications@github.com wrote:

Please try the new version from openrepos. It has several bug fixes. If your problem is not solved, enable the debug file writing. Then reproduce the error and send the log file to me.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub

https://github.com/jdrescher2006/OBDFish/issues/4#issuecomment-245054544, or mute the thread

https://github.com/notifications/unsubscribe-auth/ALTaPA40XU2DAgmUR_XlzovmpwvDGLiFks5qnbhwgaJpZM4JjrGw .

You are receiving this because you commented. Reply to this email directly or view it on GitHub: https://github.com/jdrescher2006/OBDFish/issues/4#issuecomment-245056874

Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet.

explit7 commented 8 years ago

The new Version doing the same way, like the old. New OBDII 2.1 Adapter works well, old OBDII 1.2a hangs on the last step of the initialisation. Here is the logfile:

ELM327_1.2a_obd_log.txt

Version: 0.92-3

Date: Tue Sep 6 23:44:29 2016 GMT+0200

23:44:34 Send: ATZ

23:44:34 Receive:

ELM327 v1.2a

ATZ

23:44:34 Send: ATE0

23:44:35 Receive:

ELM327 v1.2a

23:44:35 Send: ATL0

23:44:35 Receive: ATL0 OK

23:44:35 Send: ATH0

23:44:36 Receive: ATH0 OK

23:44:36 Send: ATS0

23:44:36 Receive: ATS0 ?

23:44:36 Send: ATSP0

23:44:36 Receive: ATSP0 OK

23:44:36 Send: 0100

23:44:41 Receive: 0100 SEARCHING... 41 00 BE 3E F8 11

jdrescher2006 commented 8 years ago

That looks really weird. I don't exactly understand what's going on there. From what I can see the following is going wrong:

Answer to ATZ is OK, except the ATZ which is received at the end
Answer to ATE0 (switch off echos) is the device information which is completely weird. Maybe he missunderstood and I have to wait a little longer...
Answer to ATL0 (switch off line feed) is OK, but ELM is still sending line feeds.
Answer to ATS0 (switch spaces off) is not OK, ELM did not understand that command. That's ok because this command is supported from version 1.3 on. I have to optimize the app so that it reacts to that.
Answer to 0100 is OK, but the app is now in trouble mainly because of the echos and the spaces.

I have to think about this and decide what to do about it.

jdrescher2006 commented 8 years ago

Maybe you have an android phone and could test if your old adapter works with OBD Auto Arzt. This app can also create a log file. It may help to make my app compatible to ELM v1.2a.

explit7 commented 8 years ago

Let me send you the ELM327 1.2a Adapter. I also live in Germany, so it wouldn't be expensive. I bought this Adapter in 2011 for the Nokia N900 Maemo Apps pyOBD an Carman. Both apps are old and have problems with OBD2.1

jdrescher2006 commented 8 years ago

That would be cool. But it may last some weeks to get everything going. You could send it to me and I pay for the delivery.

jdrescher2006 / OBDFish

Hanging on the last step of initialisation #4

Date: Tue Sep 6 23:44:29 2016 GMT+0200