search

jeelabs / esp-link

esp8266 wifi-serial bridge, outbound TCP, and arduino/AVR/LPC/NXP programmer
Other
2.84k stars 723 forks source link

How to get bin file for flash #334

Open ffanez opened 7 years ago

ffanez commented 7 years ago

Hello everyone i am very lay about this and beginner. I'm sorry to ask you, I use ESP8266-12 board will use firmware, i have downloaded this but i did not find the bin.file to be used flash to the board. Can you guide me to get the bin.file of the downloaded results for my use. Whether it can also be used for repeater menu with the same UI. Thank you very much.

tve commented 7 years ago

I have no idea what you downladed. Please start here: https://github.com/jeelabs/esp-link/releases/tag/V3.0.14 and download the tgz after the bold Download:

ffanez commented 7 years ago

Thanks for the answer, I immediately follow your advice and I downloaded continued extract I can not find any file.bin ready for esp download tool? I'm sorry I do not understand this, or do bin files have to be created by myself?

AdjunctExorcist commented 7 years ago

Check under the releases section. You'll find prebuilt binaries there. Under flashing instruction you'll find the memory addresses allocated for each .bin files.

ffanez commented 7 years ago

Thanks to his guides I've managed to flashing esp-link Release 3.0.14, but can not AP + STA mode simultaneously, shortly after config AP lost no longer detected before the flash reset so on.

roesl commented 7 years ago

is there a download for the bin files for Version 4.2.xx ?

tve commented 7 years ago

All downloads are here: https://github.com/jeelabs/esp-link/releases There is no version 4.2