Open Naqua opened 5 years ago
Wemos D1 esp-12 flash is ok. After reboot no AP or just short and not possible to connect to. esp-link keeps rebooting All recent versions of esp-link give same result.
All help very much appreciated.
Serial output gives:
ets Jan 8 2013,rst cause:4, boot mode:(3,6)
wdt reset load 0x40100000, len 2592, room 16 tail 0 chksum 0xf3 load 0x3ffe8000, len 764, room 8 tail 4 chksum 0x92 load 0x3ffe82fc, len 676, room 4 tail 0 chksum 0x22 csum 0x22
145> 145> * esp-link v3.2.47-g9c6530d 145> Flash config restore FAILED* 145> CONN led=0 145> SER led=14 147> Wifi init, mode=AP 150> Wifi uses DHCP, hostname=esp-link 153> "ip": "0.0.0.0"
155> "netmask": "0.0.0.0" 158> "gateway": "0.0.0.0" 161> "hostname": "" 163> sleep enable,type: 2 166> Httpd init, conn=0x3fff4128 169> No user file system found! 172> Serbridge pins: reset=12 isp=13 tx_enable=-1 swap=0 186> Reset cause: 0=normal 186> exccause=0 epc1=0x0 epc2=0x0 epc3=0x0 excvaddr=0x0 depc=0x0 187> Flash map 4MB:512/512, manuf 0xEF chip 0x4016 191> ** esp-link v3.2.47-g9c6530d: ready, heap=18960 196> SNTP timesource set to us.pool.ntp.org with offset 0 201> initializing user application 205> Waiting for work to do... 208> mode : softAP(86:f3:eb:3b:7a:83) 211> add if1 213> dhcp server start:(ip:192.168.4.1,mask:255.255.255.0,gw:192.168.4.1) 221> bcn 100
Wemos D1 esp-12 flash is ok. After reboot no AP or just short and not possible to connect to. esp-link keeps rebooting All recent versions of esp-link give same result.
All help very much appreciated.
Serial output gives:
ets Jan 8 2013,rst cause:4, boot mode:(3,6)
wdt reset load 0x40100000, len 2592, room 16 tail 0 chksum 0xf3 load 0x3ffe8000, len 764, room 8 tail 4 chksum 0x92 load 0x3ffe82fc, len 676, room 4 tail 0 chksum 0x22 csum 0x22
145> 145> * esp-link v3.2.47-g9c6530d 145> Flash config restore FAILED* 145> CONN led=0 145> SER led=14 147> Wifi init, mode=AP 150> Wifi uses DHCP, hostname=esp-link 153> "ip": "0.0.0.0"
155> "netmask": "0.0.0.0" 158> "gateway": "0.0.0.0" 161> "hostname": ""
163> sleep enable,type: 2
166> Httpd init, conn=0x3fff4128
169> No user file system found!
172> Serbridge pins: reset=12 isp=13 tx_enable=-1 swap=0
186> Reset cause: 0=normal
186> exccause=0 epc1=0x0 epc2=0x0 epc3=0x0 excvaddr=0x0 depc=0x0
187> Flash map 4MB:512/512, manuf 0xEF chip 0x4016
191> ** esp-link v3.2.47-g9c6530d: ready, heap=18960
196> SNTP timesource set to us.pool.ntp.org with offset 0
201> initializing user application
205> Waiting for work to do...
208> mode : softAP(86:f3:eb:3b:7a:83)
211> add if1
213> dhcp server start:(ip:192.168.4.1,mask:255.255.255.0,gw:192.168.4.1)
221> bcn 100