search

jeffqchen / PS2EasyHDD

A 3D printed shell for PS2 Network Adapter that allows easy access to the hard drive.
Creative Commons Attribution Share Alike 4.0 International
122 stars 4 forks source link

Support for V1.0 purple SATA interface board #1

Closed burgsth closed 7 months ago

burgsth commented 7 months ago

I have a V1.0 purple SATA interface board with a slightly different component layout. It won't fit into the printed part.

If needed I can add more dimension informations. IMG_3753

jeffqchen commented 7 months ago

I don't have the v1.0 board on hand, but I have found pictures online. This will not be accurate and could lead to issues. And it will take a bit of time to add to the models.

If you can't wait, consider getting a v2.0 for now.

jeffqchen commented 7 months ago

I have added amends to the model to account for the extra components on the v1.0 board. Please check the updated files.

burgsth commented 7 months ago

The FFC connector seems to be slightly larger than on v2.0 boards, they do not fit into the gap. Lack of about 0.5mm on each side. Will dremel the FCC gap tomorrow, now I'm printing the inner tray and will test tomorrow.

jeffqchen commented 7 months ago

Please download the latest Sata Board Cover.stl. I widened it by 1mm on each side.

burgsth commented 7 months ago

The SATA board cover seems to be fine now. The component skip on the inner tray needs to be moved about 2mm to the right (away from power connector skip) to fit the component.

jeffqchen commented 7 months ago

Fixed the Inner Tray. Please check again.

burgsth commented 7 months ago

Everything fits perfect, thank you very much. Now I'll print the mainboard parts.

jeffqchen commented 7 months ago

Thank you very much for your help!