Closed StefanGubler closed 6 years ago
These messages are no bug and can be safely ignored.
Was macht man denn beim ursprünglichen Fehler ? wenn steht: NO IP Adress ?
"It showed the error message and below it mentioned : NO IP Addresss"
Das hier ist ein bugtracker und kein Diskussions- oder Hilfeforum. Bitte an homematic-forum.de wenden.
Describe the bug and the tests done
The Raspberrymatic was no more working. So I did a reboot. As no connection was possible, connected a monitor to the raspberrymatic. It showed the error message and below it mentioned : NO IP Addresss
Then flashed a new SD-Card with the newest raspberrymartic image and started up. it showed then the same error message and showed the IP-Address 192.168.25.138 Bug1: The IP-Address listed was wrong, it had the DHCP Address 192.168.25.130
Then restored the latest backup.
On the screen, the same error message, but with the correct IP Address,
Bug 2:
Error message on this screen. Then at the end
Additional tests to Reproduce and to find the cause
flashed again the SD-Card that had the error, flashing with verify without errors (I use alsways Samsung or SanDisk SD-Cards, no cheap ones.)
changed to use a USB-Stick as the disk. The same error message on the screen.
Screenshots see above
System information (please complete the following information):
Additional context Add any other context about the problem here.
I'm a bit afraid of the new RPI-RF-MOD.
I have three installations. The Rapsberrymatic with the HM-MOD-RPI-PCB was working very stable. Running for a year without issues.
Now with the new Raspberry Pi 3B+ and the RPI-RF-MOD I have lots of issues. Event that the Raspberrymatics are all running on UPS to protect them the issues are more than before. The SD-Cards do not work for a long time, after a rebvoot or after a power loss they do not work or they have a defect.
With the LAN-Gateways I never had issues, but now, sometimes the LAN-Gateways show a Duty-Cycle of -1 .....
You can also respond me in german, as you like.