search

jeremywen / JW-Modules

VCV Rack Modules
BSD 3-Clause "New" or "Revised" License
216 stars 26 forks source link

Quantizer / would really like panel to reflect current scale selected by CV #29

Open vogelscheiss opened 6 years ago

vogelscheiss commented 6 years ago

As you know your quantizer module displays the scale that is selected by the scale-selection knob.

image

However it does not display the current scale when it is selected by CV inputs instead. The same is true for the current root note when selected by CV.

image

This makes the module very difficult to use with CVs, unless you really don't care about the result or can easily tell the difference between scattered notes quantized in an Aeolian vs. a Phrygian scale, say.

I'd be grateful if you could update the module to display scales and root notes whether selected by knobs or CVs.

nay-seven commented 6 years ago

+1 ;-)

jeremywen commented 6 years ago

ok, i will have to work on that at some point

veryfungi commented 6 years ago

I also would like to ask for this. :)

veryfungi commented 6 years ago

A workaround, could you provide the voltages required for the different notes?

veryfungi commented 6 years ago

I guess with a little setup I can determine at what voltage each octave and scale switches at. Thanks

veryfungi commented 6 years ago

No. Voltage Key

1 0.833v = C 2 1.666v = C# 3 2.500v = D 4 3.333v = D# 5 4.166v = E 6 5.000v = F 7 5.833v = F# 8 6.666v = G 9 7.500v = G# 10 8.333v = A 11 9.166v = A# 12 10.00v = B

magicthise commented 3 years ago

Did anyone do the work to establish the scale voltages as well?