Open GoogleCodeExporter opened 8 years ago
considering the part below ( from the issue ) :
[
Resetting in that way sometimes solves the issue. However if I do it a few
times, the analog inputs are not sensed anymore ( amount of reset times is
not solid, sometimes after 3 times, sometimes 30 ).
But I can keep reading the digital input
]
Resetting the board physically ( thus by pressing the reset button on the board
),
solves the analog inputs that are not being sensed. However, I would like to do
it
with actionscript code.
Original comment by kasperka...@gmail.com
on 13 Sep 2009 at 8:42
Ok, problem seems solved.
I connected the Arduino through an USB hub. That made it a bit instable I
think. Now
it works fine.
Only one question left :
The arduino.resetBoard() function doesn't seem to do anything.
The command is received, but the board keeps running the same.
Original comment by kasperka...@gmail.com
on 17 Sep 2009 at 1:27
Original issue reported on code.google.com by
kasperka...@gmail.com
on 11 Sep 2009 at 8:30Attachments: