jerrod-lankford GarageQTPi issues

jerrod-lankford / GarageQTPi

An MQTT server for a raspberry pi garage door opener. Most commonly used as a HomeAssistant cover component.

MIT License

75 stars 36 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

main.py is full of issues due to newer versions of PiOS

#53 Danielson89 closed 2 months ago
2
Unsupported on Bookworm / or Linux Kernel >= 5.11

#52 Jxck-S opened 1 year ago
0
Dev - Version Updates

#51 bg1000 opened 2 years ago
0
Set GPIO pin state when initialising

#50 Mustard opened 2 years ago
1
define unique_id

#49 hmoffatt opened 3 years ago
0
Bump pyyaml from 3.12 to 5.4

#48 dependabot[bot] opened 3 years ago
0
No longer active?

#47 craigInTx opened 3 years ago
0
Mqtt availability

#46 craigInTx opened 3 years ago
3
Availability Support (Birth and LWT Messages)

#45 hellcat707hp closed 3 years ago
3
Set initial relay output on pin setup.

#44 craigInTx opened 3 years ago
0
Any chance for help running this prog ?

#43 rapi3 closed 4 years ago
6
Error on first start

#42 SSSTREDDD closed 4 years ago
1
device_class not set when using discovery

#41 dyde121 opened 4 years ago
3
Door opens on reboot/power up?

#40 vulcanjedi closed 4 years ago
1
is RPi3 really a min requirement?

#39 vulcanjedi closed 4 years ago
6
Convert to Python 3

#38 bg1000 closed 4 years ago
3
HA isn't triggering the relay

#37 andystewart999 opened 4 years ago
3
fix boot trigger of relay

#36 gouldner opened 4 years ago
2
Relay is triggered on pi startup

#35 gouldner opened 4 years ago
1
Install error!

#34 ameggs closed 4 years ago
1
Bump pyyaml from 3.12 to 5.1

#33 dependabot[bot] closed 3 years ago
1
fixed austostart setup

#32 tagno25 closed 5 years ago
0
Can't find installed libraries when running as a service

#31 bg1000 closed 5 years ago
7
Break sensor support

#30 johntdyer opened 5 years ago
0
Unable to run main.py

#29 8osman closed 5 years ago
6
Incorrect protocol name

#28 Sleeepy2 closed 5 years ago
2
ValueError: Channel must be an integer

#27 JBenzie closed 5 years ago
2
No connection through GPIO pins

#26 smeranda opened 5 years ago
5
Added support for HomeAssistant MQTT discovery

#25 tagno25 closed 5 years ago
2
Change MQTT protocol value to 3

#24 rkochman closed 6 years ago
3
Reports of not working with paho mqtt 1.3

#23 jerrod-lankford closed 6 years ago
1
Updated Wiring Diagram and unbuffered python for journald logging

#22 reibuehl closed 6 years ago
1
Systemd service file should start python with -u parameter

#21 reibuehl closed 6 years ago
3
Wrong pin for right door in documentation

#20 reibuehl closed 6 years ago
1
Problem with service

#19 4ordy closed 6 years ago
7
Parallel pushbutton didn't work anymore

#18 geraldhansen closed 6 years ago
8
struct.error: cannot convert argument to integer

#17 WalterWampe closed 6 years ago
7
Door Opening by Itself

#16 rsmith0906 closed 6 years ago
2
respect state when receiving commands

#15 tagno25 closed 7 years ago
1
Garage door commands should respect current state

#14 Curvin777 closed 7 years ago
2
Rebooting/Starting up Raspberry Pi triggers relay

#13 Curvin777 closed 7 years ago
12
Autostart and relay invert

#12 tagno25 closed 7 years ago
11
Question about Raspberry Pi Zero

#11 onlize closed 7 years ago
2
The door would not open or close.

#10 onlize closed 7 years ago
8
Some error when I try to sudo python main.py

#9 onlize closed 7 years ago
4
Cannot install

#8 onlize closed 7 years ago
2
Cannot install

#7 onlize closed 7 years ago
0
Added support for door opening/closing delay

#6 Spartan-II-117 closed 6 years ago
7
"closing" state

#5 Spartan-II-117 closed 7 years ago
2
Update config.yaml

#4 Spartan-II-117 closed 7 years ago
0