Wiz Smart Button

[micw]

Not an issue. Just wanted you to know that "Wiz Smart Button" (https://www.wizconnected.com/en-gb/p/accessory-smart-button/8719514554795) also works. Button IDs are

100: on 101: off 102: brightness plus (long-press to "on") 102: brightness minus (long-press to "off")

[ImaZen88]

Hello, I would like to ask you, where can i change those IDs. Thanks in advance

[micw]

You use it in your config, see example:

      condition:
        lambda: return data.button >= 16 && data.button <= 19;

Buttons on this remote are 100...102.

[ImaZen88]

Thanks a lot, but I still have no events in event log.

esphome:
  name: wiz-bridge
  friendly_name: wiz-bridge

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "1x6vW9uDccJbWrdPja9P0ElthJ7Exd4bc5vYzdhMNHY="

ota:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Wiz-Bridge Fallback Hotspot"

captive_portal:

external_components:
  - source: github://jesserockz/wizmote-esphome
    components:
      - esp_now
      - wizmote

esp_now:

wizmote:
  on_button:
    if:
      condition:
        lambda: return data.button >= 100 && data.button <= 102;
      then:
        - homeassistant.event:
            event: esphome.wizmote_choose
            data:
              mac: !lambda 'return format_hex(data.bssid, 6);'
              button: !lambda 'return data.button - 99;'
              sequence: !lambda 'return data.sequence;'
      else:
        - homeassistant.event:
            event: esphome.wizmote_action
            data:
              mac: !lambda 'return format_hex(data.bssid, 6);'
              button: !lambda 'return data.button;'
              sequence: !lambda 'return data.sequence;'

I am grateful for such a fast response, but I am really lost here, did you encounter this problem too and if, how did you solve it? Thanks

(I have the mac address in lowercase no separation 444f8eb051f9 format) (It's printing [20:12:38][D][esp_now:072]: mac: 44.4F.8E.B0.51.F9 (6), data: 91.C4.01.00.00.20.64.01.64.59.E5.DC.7E (13) in ESPHome console) (I a listening to * in event log)

[ImaZen88]

This is trace when i run the automation manually

[ImaZen88]

It's not working even if I remove the condition (no event log)

esphome:
  name: wiz-bridge
  friendly_name: wiz-bridge

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "1x6vW9uDccJbWrdPja9P0ElthJ7Exd4bc5vYzdhMNHY="

ota:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Wiz-Bridge Fallback Hotspot"

captive_portal:

external_components:
  - source: github://jesserockz/wizmote-esphome
    components:
      - esp_now
      - wizmote

esp_now:

wizmote:
  on_button:
      - homeassistant.event:
          event: esphome.wizmote_test
          data:
            mac: !lambda 'return format_hex(data.bssid, 6);'
            button: !lambda 'return data.button - 99;'
            sequence: !lambda 'return data.sequence;'    

[micw]

Check the log on the esp32 first. In the "logger" section you can set the log level to "debug".

You also need this setting to make it work reliable:

https://github.com/jesserockz/wizmote-esphome/issues/8#issuecomment-1781223397

[ImaZen88]

Found out it defaults to debug, so I still see only the [D][esp_now:072]: mac: 44.4F.8E.B0.51.F9 (6), data: 91.6F.02.00.00.20.64.01.64.0F.D4.D6.F4 (13) in esp logs, and nothing from esphome in events log And I added the power save mode