Events not showing up in event log

[ImaZen88]

I have right format for mac address. Logging works normal in esphome integraton. When listening to events, I am listening to * and random 5 minute checkup calls are showing up, so event log is working normally. I got fresh home assistant installation. I tried to remove the condition if it was making sth bad, but that didnt work either. So that must mean the on_button function is not working right?

esphome:
  name: wiz-bridge
  friendly_name: wiz-bridge

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "1x6vW9uDccJbWrdPja9P0ElthJ7Exd4bc5vYzdhMNHY="

ota:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Wiz-Bridge Fallback Hotspot"

captive_portal:

external_components:
  - source: github://jesserockz/wizmote-esphome
    components:
      - esp_now
      - wizmote

esp_now:

wizmote:
  on_button:
      - homeassistant.event:
          event: esphome.wizmote_test
          data:
            mac: !lambda 'return format_hex(data.bssid, 6);'
            button: !lambda 'return data.button - 99;'
            sequence: !lambda 'return data.sequence;'    

I should also add, that I am using this for wiz smart button, not wizmote, but the other guy in issues said it works for him so, I'd like to ask what am I doing wrong.

Thanks in advance

[ImaZen88]

Here is the original

esphome:
  name: wiz-bridge
  friendly_name: wiz-bridge

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "1x6vW9uDccJbWrdPja9P0ElthJ7Exd4bc5vYzdhMNHY="

ota:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Wiz-Bridge Fallback Hotspot"

captive_portal:

external_components:
  - source: github://jesserockz/wizmote-esphome
    components:
      - esp_now
      - wizmote

esp_now:

wizmote:
  on_button:
    if:
      condition:
        lambda: return data.button >= 100 && data.button <= 102;
      then:
        - homeassistant.event:
            event: esphome.wizmote_choose
            data:
              mac: !lambda 'return format_hex(data.bssid, 6);'
              button: !lambda 'return data.button - 99;'
              sequence: !lambda 'return data.sequence;'
      else:
        - homeassistant.event:
            event: esphome.wizmote_action
            data:
              mac: !lambda 'return format_hex(data.bssid, 6);'
              button: !lambda 'return data.button;'
              sequence: !lambda 'return data.sequence;'

[jesserockz]

Did you add the device to home assistant?

[ImaZen8]

Hello, Yeah I did (thanks for the response tho) Events log is blank

[jesserockz]

@ImaZen8 None of those screenshots show that you have added the device to Home Assistant.

[avt613]

Looking at #issue 19 helped me... If you go into "developer tools - events - listen to events" and start listening for esphome.wizmote_action or esphome.wizmote_choose then press a button on your remote a few times does anything happen? Also is the light on the front of the wizmote lighting up?