search

jethornton / mesact1

MIT License
24 stars 10 forks source link

configuration is not working with mesa 7i97 card #80

Closed Vorms closed 1 year ago

Vorms commented 1 year ago

Version and Build Date Version = 1.2.1 Build Date =10/1/2023

Describe the bug The config produced by the tool is not usable

To Reproduce Steps to reproduce the behavior: Create a default config with 7i97 card

Expected behavior working conf

Config File [Attach the ini file that has the bug in it. the files are attached 01-10-23-09:25:09.zip Operating System OS = Debian 10

Additional context If you haven't a mesa 7i97 card we can organize a meeting and you can connect to my machine using anydesk. Best regard I attached also a screen shoot Capture d’écran_2023-01-10 Thanks for your work !

jethornton commented 1 year ago

Axis loads ok? What is not working? I do not have a 7i97 in stock to test with here.

jethornton commented 1 year ago

At the very bottom of your ini file I see some duplicate section/key/values [JOINT_0]HOME_SEQUENCE = 0 [JOINT_1]HOME_SEQUENCE = 1 [JOINT_2]HOME_SEQUENCE = 1

Did you add those?

Vorms commented 1 year ago

Not at all. As you can see on the screen capture, It's only axes X and Z. Both axes are disabled.

Many thanks for your help. I can provide as many files and that you need. Anydesk connetion is also possible.

Best regards Thierry Vorms

Le jeu. 12 janv. 2023, 08 h 46, jethornton @.***> a écrit :

At the very bottom of your ini file I see some duplicate section/key/values [JOINT_0]HOME_SEQUENCE = 0 [JOINT_1]HOME_SEQUENCE = 1 [JOINT_2]HOME_SEQUENCE = 1

Did you add those?

— Reply to this email directly, view it on GitHub https://github.com/jethornton/mesact/issues/80#issuecomment-1380379411, or unsubscribe https://github.com/notifications/unsubscribe-auth/AA6QD4OJ2VR4H24BIVKM6V3WSADKJANCNFSM6AAAAAATW33ZWU . You are receiving this because you authored the thread.Message ID: @.***>

jethornton commented 1 year ago

That is the expected behavior when the E-Stop is on and power is off.

Vorms commented 1 year ago

Hello, Yes axis loads and work. Yes you are right,, there was mistake added by me: [JOINT_0]HOME_SEQUENCE = 0 [JOINT_1]HOME_SEQUENCE = 1 [JOINT_2]HOME_SEQUENCE = 1

I remove it and sorry for disturbing you with that.

But when I start linuxcnc with the conf, there is in the display only axe X and Z but not the Y why ?

I can help you as you want. Best regards Thierry

Le jeu. 12 janv. 2023 à 08:03, jethornton @.***> a écrit :

Axis loads ok? What is not working? I do not have a 7i97 in stock to test with here.

— Reply to this email directly, view it on GitHub https://github.com/jethornton/mesact/issues/80#issuecomment-1380311156, or unsubscribe https://github.com/notifications/unsubscribe-auth/AA6QD4NPIHSJTCYCOZGIC3DWR76LJANCNFSM6AAAAAATW33ZWU . You are receiving this because you authored the thread.Message ID: @.***>

-- Thierry Vorms Québec Canada