search

jezzab / DUMLdore

Firmware Flashing Tool v3.20
279 stars 105 forks source link

Error in DUMLdore V1.92 #16

Closed 39Den39 closed 7 years ago

39Den39 commented 7 years ago

Hello! I have problem - DUMLdore see Mavic Pro, when i try flash i see error - Timed out attempting to contact the FTP server on the device/ You can test for connectivity by going to ftp://192.168.42.2/ with the browser. This site - ftp://192.168.42.2/ not open in Google Chrome on PC and Android Phone. This is problem with server?? Thank you!

jezzab commented 7 years ago

There is a problem with the connectivity of your drone or the drivers to the PC. If you can't access that link on the PC with the drone attached then you cannot flash or do anything. I would suggest trying to re-install Assistant2.

39Den39 commented 7 years ago

Jeremy, now my Mavic detected with firmware version 00.00.0000 ( after unsuccessful upgrade - flashing freeze and i power off Mavic) I install on PC latest DJI Assistant and try upgrade using official method on .1000 firmware. BUT! All freezes at 0% with "Transmitting..." This means that this Maviс can no longer be programmed at all??? I need buy new Mavic ? ((( There are still any ways to flash any firmware in to my Mavic ??

jezzab commented 7 years ago

If Assistant2 cannot flash the aircraft then DUMLdore cannot flash the aircraft as they work exactly the same.

39Den39 commented 7 years ago

Ok. There are other ways to revive - to write firmware in drone?

jezzab commented 7 years ago

Not that I am aware of. Why did you turn off the Mavic while it was upgrading? It can look like its paused during the upgrade as it can take up to 15 minutes.

MAVProxyUser commented 7 years ago

Yeah that was a bone headed move, you need to buy a new core board. Or contact DJI care about your brick.

39Den39 commented 7 years ago

Progress freeze for 1 hour and battery in Mavic indicate low charge (

jezzab commented 7 years ago

What firmware did you use and where did it come from? What version of firmware where you going from and to?

39Den39 commented 7 years ago

I have 900 version, but with night shots i often have bug with RAW photos - they damaged. Day photos is ok. I tried made downgrade to 700 version, but process is freeze....