search

jfedor2 / flatbox

Low profile hitbox-layout fightstick
662 stars 135 forks source link

Won't Detect or Power After Firmware Flash and Unplug #17

Closed InfraredAces closed 2 years ago

InfraredAces commented 2 years ago

Expected Behavior:

After flashing the firmware, I should be able to unplug the controller and have the controller be detected once it is plugged in again.

Actual Behavior:

It initially detects the controller immediately after flashing the firmware according to the instructions. Once device is unplugged form PC, Flatbox is not detected by computer.

Steps to Reproduce the Problem:

  1. Plug USB into Flatbox PCB and PC
  2. Press the RESET switch while holding down the BOOT switch
  3. Mount and open "RPI-RP2"
  4. Copy "flatbox-rev4.uf2" to "RPI-RP2"
  5. Unplug controller from PC
  6. Plug controller back into PC

Specifications

Version: Flatbox Rev4 Platform: Windows 10 21H2 & EndeavourOS

jfedor2 commented 2 years ago

Perhaps an issue with the flash chip on your board?

InfraredAces commented 2 years ago

I believe this might be the issue. I've gotten 2 out of the 5 board to work and am waiting on parts to replace.