Closed piuzera closed 1 year ago
Hi,
This is the specific part that was supposed to be used:
https://jlcpcb.com/partdetail/Yageo-RC0402FR0727RL/C138021
You can probably use any 27 ohm resistor in 0402 package.
I've found one that's similar, would it work too?
"RESISTOR SMD 0402 1/16W 5% 27R"
The one you sent is 1%, I'm having trouble finding a local store that sells 1% ones.
Thanks again!
My guess is that it won't make a difference.
Thank you for the quick reply. I'll be testing with that one and if it doesn't work, I'll order the exact one you sent me. Have a good day!
Greetings!
First of all, thank you for this great project. I recently ordered 5 units from JLCPCB and unfortunately, they seem to be missing the R3 and R4 resistors. I can't power up and flash the memory because of this, most likely. I wish the reason is this, otherwise I just lost a ton of money :(
Below is an image of the PCB:
Can you enlighten me on what resistor to buy for these slots? I will solder them myself to save the PCBs.
Thanks in advance!