Alarm system: Warning of high temperature or fan failure

[GoogleCodeExporter]

It is good to have another option "Warning of high temperature or fan failure".

When the temperature rises above the threshold set by the user, a warning
is displayed on the screen / email / SMS / log

Original issue reported on code.google.com by Nikola...@gmail.com on 6 Apr 2010 at 5:42

[GoogleCodeExporter]

Original comment by moel.mich on 6 Apr 2010 at 6:56

• Changed state: Accepted
• Added labels: Type-Enhancement
• Removed labels: Type-Defect

[GoogleCodeExporter]

Really would like to see this implemented as there are no other free 
alternatives with this option. I'd be very happy even if its just a screen 
message or pc speaker beep. 

Cheers

Original comment by sendkri...@gmail.com on 26 Sep 2010 at 2:05

[GoogleCodeExporter]

Me too.. a sound alarm would be also great...

Original comment by drissna...@gmail.com on 26 Sep 2010 at 6:05

[GoogleCodeExporter]

Hello all,

Indeed, it would be terrific to have an alert function.
It is in fact the only feature that is missing to make it the best monitoring 
tool.
There is some freeware doing that already, such as Speedfan or Core Temp.
But Speedfan does not provide a Gadget and Core Temp does not monitor SMART.

The new gadget is great: Small enough to just keep an eye on it every once and 
a while in a corner of the screen.

For me alerts may be as intrusive as possible.
For instance, the alert function of Core Temp is too discrete: It only makes 
the tray icon blink. After all, if you have the choice between getting severely 
warned to stop your computer or have your hard disk damaged because it went 
over 55°C, what would you chose?
What about having the Gadget background blink red if one of the temperatures is 
above threshold? Should not be too difficult, IMHO.
The most difficult is probably to have a user-friendly way to habve the user 
specify the values above which he wants to be warned...

Good work!

Original comment by Frut...@gmail.com on 3 Nov 2010 at 5:58

[GoogleCodeExporter]

Once the basic configurable alarm system is implemented, one could add more 
alarm "output" channels, like the "Snarl" notification system: 
http://www.fullphat.net/

Original comment by moel.mich on 15 Dec 2010 at 9:26

[GoogleCodeExporter]

There are two possible ways of how alarms could be configured. 

(A) Attach an alarm configuration dialog to each sensor, where a lower or upper 
alarm limit could be defined and enabled. When a sensor is no longer available, 
also the alarm configuration would automatically disappear. To get an overview 
on the currently configured alarms an additional column could be added to the 
main treeview showing the upper and lower alarm bounds (where enabled).

For the actual alarm channels (warning sound, blinking tray icon, sending 
email, ...) one central setting would have to be used for all alarms. 
Alternatively, for each condition an alarm channel could be chosen (e.g > 70°C 
blink tray icon, > 80°C making warning sound, >100°C shut down), but then it 
is difficult to maintain a useful overview in the treeview.

(B) A central dialog where more complex alarms could be configured. This would 
allow to define alarm conditions involving more than one sensor for example. 
Because it is one central list, this would also give an overview to the user 
which alarm conditions are currently enabled. One alarm channel per condition 
would be enough in this variant, as additional conditions can always be added. 
A difficulty in this variant is the choosing of sensors and formulating the 
conditions. Also cases where sensors are no longer available have to be handled 
separately.

Original comment by moel.mich on 12 May 2011 at 3:44

• Changed title: Alarm system: Warning of high temperature or fan failure

[GoogleCodeExporter]

I am looking forward to see some kind of notification feature as well

Original comment by fikret.m...@gmail.com on 27 May 2011 at 10:27

[GoogleCodeExporter]

Issue 244 has been merged into this issue.

Original comment by moel.mich on 17 Jun 2011 at 8:31

[GoogleCodeExporter]

Like for the alarm option :D

Original comment by smm....@gmail.com on 4 Jul 2011 at 8:32

[GoogleCodeExporter]

Issue 251 has been merged into this issue.

Original comment by moel.mich on 25 Jul 2011 at 12:08

[GoogleCodeExporter]

Would really like to see this! Maybe even have a 1st threshold for warning, and 
a second one for shutdown (better than overheating a video card...)

Original comment by elifer5...@gmail.com on 9 Nov 2011 at 11:38

[GoogleCodeExporter]

A simple implementation of alarms can be found in the file attached to Issue 
278.

Adding to Comment 6:

For certain hardware (e.g. Intel CPUs) one can create useful alarm bounds 
automatically. These suggested alarms bounds have to be added to the ISensor 
interface. With solution (A) one could use the values directly to configure 
alarms on the corresponding sensors. For solution (B) there could be the 
problem, that the software doesn't know which alarm channel should be used for 
auto creation of alarms (still one could just use a default alarm channel which 
the user than can change).

Original comment by moel.mich on 15 Jan 2012 at 5:50

[GoogleCodeExporter]

Change the colour of system tray gadget at programmed threshold .. maybe to 
bold red?

Original comment by a...@kench.freeserve.co.uk on 19 Jan 2012 at 11:32

[GoogleCodeExporter]

I would also like to see a color change in the taskbar icon that reflects the 
highest level of concern being seen.  Once red, an icon balloon could appear 
(until closed) and, if configured, a sound could persist until turned off.  If 
an alarm results in shutdown, there needs to be a notification dialog upon 
restart, along with a log.

Original comment by brucemel...@gmail.com on 11 Mar 2012 at 2:05

[GoogleCodeExporter]

I suggest adding more high temperature actions, like increasing the fan speed.

Original comment by mantox...@gmail.com on 19 Mar 2012 at 1:38

[GoogleCodeExporter]

Even the simplest alert popup or even an option to run some command would be 
nice if you don't have the time to implement anything else. It would be really 
a number one monitoring tool for Windows if it had this fetaure.

Original comment by jgon...@gmail.com on 27 May 2012 at 3:35

[GoogleCodeExporter]

A small suggestion: maybe if you put the source on GitHub someone with 
necessary skills (C#) will have the time to fork it and add this?

Original comment by jgon...@gmail.com on 27 May 2012 at 3:36

[GoogleCodeExporter]

It seems most people would be happy with a "basic"/generic alarm state -- 
certainly I would be happy -- while you worked on something a little more 
elaborate.  My own thinking is that not much is required: I would like to see 
it tied to the Sidebar Gadget (very useful), and change the colour to 
brilliant, solid, opaque (transparency=0) red; slow blinking could be an 
option; change the affected sensor reading ONLY to brilliant solid white; and 
place the gadget in the foreground.  The foreground bit would have to take 
priority over any competing full-screen apps...  Sound is not important for me, 
as I normally work in silence.  I think most people would need the option of 
naming their own thresholds, as the hardware list could get large...  Do 
manufacturers place over-temp levels in accessible places?

Original comment by gledwa...@amnet.net.au on 17 Nov 2012 at 1:03

[GoogleCodeExporter]

Would like to have option for system shut down 30 sec after a set temp was 
reached.

Original comment by hardyc...@gmail.com on 4 Mar 2013 at 12:25

[GoogleCodeExporter]

Issue 444 has been merged into this issue.

Original comment by moel.mich on 29 Jun 2013 at 8:33

[GoogleCodeExporter]

Is anyone working on this alert system? If not I'm willing to contribute my 
time and implement sound alert, message box and maybe an auto shutdown in case 
of no reaction from the user afrer certain amount of time has passed.

Original comment by RadicDot...@gmail.com on 19 May 2014 at 6:47

[GoogleCodeExporter]

Why can open monitor not alert via email on high temperature!?

Original comment by theinbox...@gmail.com on 23 May 2014 at 4:34

[GoogleCodeExporter]

Thank you for volunteering RadicDot.  

There hasn't been a new release in some time so I suspect nobody is working on 
this.  Hopefully Moel.Mich will come along shortly and confirm that.

Original comment by keithtar...@gmail.com on 23 May 2014 at 6:56

[GoogleCodeExporter]

I've added a simple sound and red flashing text to the code when fan/pump 
reaches 0 RPM. Is there anyone here willing to merge my code and recompile?

Original comment by RadicDot...@gmail.com on 23 Aug 2014 at 9:20

[GoogleCodeExporter]

I want the code. when I can download.

Original comment by cruztai...@gmail.com on 16 Oct 2014 at 1:10