Feature request: Single device for Shelly (Pro) EM3, instead of three.

[oh2th]

Would it be possible to have a choice to have Shelly (Pro) EM3 devices to appear as one single device or three individual devices?

When in combined 3-phase device mode use capabilities:

• onoff - relay on/off
• measure_power.A - Phase A measured power
• measure_power.B - Phase B measured power
• measure_power.C - Phase C measured power
• measure_power - sum of measured power
• meter_power.A - Phase A metered power
• meter_power.B - Phase B metered power
• meter_power.C - Phase C metered power
• meter_power - Total metered power
• meter_power_factor.A - Phase A Pf
• meter_power_factor.B - Phase B Pf
• meter_power_factor.C - Phase C Pf
• measure_current.A - Phase A measured current
• measure_current.B - Phase B measured current
• measure_current.C - Phase C measured current
• measure_voltage.A - Phase A measured voltage
• measure_voltage.B - Phase B measured voltage
• measure_voltage.C - Phase C measured voltage
• measure_voltage - Total measured voltage
• meter_power_returned.A - Phase A Power returned
• meter_power_returned.B - Phase B Power returned
• meter_power_returned.C - Phase C Power returned
• meter_power_returned - Total power returned
• rssi
• deviceGen1

This would allow Power by the Hour for example to use the device as is and wouldn't need a << group >> device in between. Also would make UI cleaner when there is less devices, specially devices with no function.

[jghaanstra]

Probably possible at least for the most part anyway. But it’s not going to happen (soon). This is quite a break from the way the app is designed so it’s a lot of work to develop and maintain. If more people vouch for it, perhaps it might get added in the future. I'll keep this open for now.

[lasertack]

Hi!

Same here. Would be extremely great to have one single device as it is extremely annoying handling three different devices.

Thanks

Alex

[jghaanstra]

For the Shelly Pro 3EM this has been added when the device is re-paired and the device profile is set to triphase. As the Shelly 3EM does not seem to have this kind of profile setting it's to complex to implement this for this device as well.