Closed Arnie88 closed 8 months ago
When did you last try, the initial release did not include the 3 button control but it was added with a later release. Please re-pair it on app version 3.23.7 or higher.
I did try today. Now I reinstalled the Shelly app in Homey, but no effect. It is much better than in HA (I cannot made the pairing), but there are no 3 operational switches appeared also. So the app version is 3.23.7 exactly.
Could you post a screenshot of the device as seen in the Homey app?
Of course:
Think I found it and will hopefully fix it with the next release.
Thanks in advance!
Hi, thanks for the new release. The UP-STOP-DOWN buttons are there now. But not working:
Is this after a complete re-pair of the device?
Absolutely. Then I did try to conect to my HA also
I'll make another edit to see if that works with the next release.
Hi, ok, thanks! There is the slider also on the first panel, before the page of the buttons. Let me know if I can help
Br, Ernő
Jelger Haanstra @.***> ezt írta (időpont: 2023. dec. 4., H, 21:13):
Sounds like an issue in Homey code, I need Athom to look at it and that might take some time.
— Reply to this email directly, view it on GitHub https://github.com/jghaanstra/cloud.shelly/issues/210#issuecomment-1839401421, or unsubscribe https://github.com/notifications/unsubscribe-auth/AXKHOQHFA3IV56R2RETKQSDYHYVHHAVCNFSM6AAAAAA75OFTNKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMZZGQYDCNBSGE . You are receiving this because you authored the thread.Message ID: @.***>
Now I have the same problem with Qubino Shutter DC module also... There are no buttons to operate them
I do not manage the Qubino app. I just released a new version of the app (3.24.0) which might fix the buttons capability for the Shelly Wave Shutter. Please test it.
@jghaanstra, I just point it out that acc. Homey App SDK it's not recommended/allowed to use sliders AND buttons (Up/Down/Stop) together.
Never implement both windowcoverings_state and windowcoverings_set for one driver. This creates duplicate UI components and Flows cards.
windowcoverings_state = Up/Down/Stop windowcoverings_set = open/close level
https://apps.developer.homey.app/the-basics/devices/best-practices/window-coverings
Thanx for the tip, but it is requested by multiple users to have either one or both of these capabilities.
I know it's a dilemma. In the past, both variants were available even in the Fibaro app from Athom and I never experienced any problems. I would also like to have both functions back.
Since this a certified app and I probably need to follow the guidelines I will most likely remove the windowcoverings_state (up/down/stop) button in a future release. People who would like to see both capabilities will have to turn to Athom.
Sorry for the late reply, but also not working
Although this capability will probably be removed I'm still interested in why this isnt working. Please send me a diagnostic report from the app settings.
Happy New Year! Here it is: 54830fd3-0815-492c-9a87-7a0f72984fcb (I hope that you can find, because Im testing a lot usually)
Happy New Year! Here it is: 54830fd3-0815-492c-9a87-7a0f72984fcb (I hope that you can find, because Im testing a lot usually)
See the previous comments. The windowcoverings_state capability will be removed with the next release.
I did try it today, and it worked. For 3 minutes... Now I try to check it by HA... or may be the Shelly module is dead
Hello, I have problem with the new shutter module. Many times I tried to include and exclude to the system. That is sure, it is in Shutter mode, but the 3 standard buttons (UP-DOWN-Stop) wont appear, just the slider. It is not good for me, because I have a shutter motor with constant power, so I cannot calibrate it.