Open alexio70 opened 3 weeks ago
I have double checked if the double Flex sensor is bonded to an Actuator, which is the case. After rebooting both free@home and HA there is no difference; both the right rocker and the left rocker are connected to an actuator (dimmable light, connected to a WL dimmer/sensor). Here is the dump of my freeathome... https://github.com/users/alexio70/projects/2
Hello, I tried to take a look at your dump, but the link does not show the xml file
Hi jheling,
Can you find attached compressed attachment? Thanks for having a look at this; it’s a big problem for my setup that I really want to solve

Mvg
Alexio
Op 7 jun 2024, om 20:03 heeft jheling @.***> het volgende geschreven:
Hello, I tried to take a look at your dump, but the link does not show the xml file
— Reply to this email directly, view it on GitHub https://github.com/jheling/freeathome/issues/186#issuecomment-2155288240, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATZZKKUGGLTZVBSAQLNMJNDZGHYXBAVCNFSM6AAAAABIWKH3I2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJVGI4DQMRUGA. You are receiving this because you authored the thread.
Hello, I don't see the attachtment
any other recommendation how I can get this across?
Can you try to zip the xml file and add it as an attachment to the message?
Op zo 9 jun. 2024 22:30 schreef alexio70 @.***>:
any other recommendation how I can get this across?
— Reply to this email directly, view it on GitHub https://github.com/jheling/freeathome/issues/186#issuecomment-2156777273, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIMRZPFQI6RQ2CSHPYOW2J3ZGS3PLAVCNFSM6AAAAABIWKH3I2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJWG43TOMRXGM . You are receiving this because you commented.Message ID: @.***>
Please find attached ZIP file (357KB). Mvg
Alexio

Op 10 jun 2024, om 07:45 heeft jheling @.***> het volgende geschreven:
Can you try to zip the xml file and add it as an attachment to the message?
Op zo 9 jun. 2024 22:30 schreef alexio70 @.***>:
any other recommendation how I can get this across?
— Reply to this email directly, view it on GitHub https://github.com/jheling/freeathome/issues/186#issuecomment-2156777273, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIMRZPFQI6RQ2CSHPYOW2J3ZGS3PLAVCNFSM6AAAAABIWKH3I2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJWG43TOMRXGM . You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/jheling/freeathome/issues/186#issuecomment-2157315530, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATZZKKUSRGULYP6SWJVUDTDZGU4PBAVCNFSM6AAAAABIWKH3I2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJXGMYTKNJTGA. You are receiving this because you authored the thread.
Hello, a zip file through mail does not seem to work. Could you try it on GitHub.com?
Hello, a zip file through mail does not seem to work. Could you try it on GitHub.com?
If you go to my Github (https://github.com/alexio70/freeathomedump/blob/main/dump) and click the "View raw" you should be able to see the dump file
Ok, i am able to see the dump file. Do you a serial number of a double Flex sensor? That saves time for me finding the device.
Hey, I have read and double check your issue : #132 but my free@home Flex Devices, double sensor, are not recognized - although the new Flex dimming sensor/ actuator is recognized; could you provide me some guidance to what information is suitable . Thanks a lot