Update Support List - Add OrangePI CM4 (/w Base) Works Fine

[nikos445]

Add in your Support list the following Device (OrangePI CM4) (arm64) ...

tested and working fine...

• OrangePI Base + CM4

Specs:

4 cores 8GB RAM 64GB EMMC

• Quick installation instructions

  Balena etcher => flash sd card with debian...
  Boot sd card and flash emmc with debian (img)...
  Shutdown and remove sd card
  Boot Debian from EMMC 
  Follow instructions for installing Proxmox from repository (add repo + update + install pve packages)
  Follow instructions for Rockchip pve-edk-firmware...
  Follow instructions for starting a QEMU VM (wget+import) 

• Tested uploading images to local storage (emmc) and create vm from UI (doesnt work for some reason in SEABIOS there is no display and in UEFI it doesn't find boot devices.)

[jiangcuo]

Created a new wiki page to list support device https://github.com/jiangcuo/Proxmox-Port/wiki/Support-List

[dandycyclone]

Actually this comment/problem is still valid - and even with OrangePI 5:

• Tested uploading images to local storage (emmc) and create vm from UI (doesnt work for some reason in SEABIOS there is no display and in UEFI it doesn't find boot devices.)

SeaBIOS "no display" problem is yet to be debugged, but for "in UEFI it doesn't find boot devices" this workaround could be used so far: https://mricher.fr/post/boot-from-an-efi-shell/ or via OVMF TUI: https://pve.proxmox.com/wiki/OVMF/UEFI_Boot_Entries

Note:

• official recommendation from Proxmox using EFI disk to preserve efivars and as such boot order did not really help me: https://forum.proxmox.com/threads/purpose-of-the-efi-disk.53862/ - each time I need to change VM disk layout (how they are attached to controller) I have to repeat above-mentioned sequence of steps. Though on the other hand it seems to be an expected behavior :)