search

jilir / wl500g

Automatically exported from code.google.com/p/wl500g
0 stars 0 forks source link

port order go crazy on DIR-620C1 #446

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
I installed DIR620C1-3.0.6-r5066M.trx over original 1.0.8.
Everything was ok. I made "Backup Setting File". Little later I made "Upload 
Setting File" and router stopped working. I figured out that WAN connector 
jumped to LAN4 connector after "Upload Setting".

These values:
vlan1ports=1 2 3 4 5*
vlan2ports=0 5

I changed to:
nvram set vlan1ports="0 1 2 3 5*"
nvram set vlan2ports="4 5"

The problem was solved.

I'm using DIR620C1-3.0.6-r5066M.trx on DIR620 C1 router.

$ nvram show | grep board
boardrev=0x1202
boardtype=0x053d
boardpwrctl=0x00000c00
boardflags2=0x1000
boardflags=0x710
boardnum=0629

PS: Also minor things
No N mode on WiFi settings.
WiFi LED does not light.
"Router model: Unknown" on Status page.

Original issue reported on code.google.com by mrakobes...@gmail.com on 25 Jun 2014 at 12:40

GoogleCodeExporter commented 9 years ago 
Sorry, our firmware don't support D-link routers

Original comment by lly.dev on 25 Jun 2014 at 6:35